EURUSD 1H RENKO CHART STRATEGY #2The second simple Renko Trading Strategy system is an indicator based strategy that uses price-momentum divergence to identify trend reversals.
Renko Trading Strategy #2
For this Renko trading strategy, we only need to use the RSI indicator. We can use a 14- period or a 20-period RSI indicator. So, use the same period as the ATR 14 or 20 Renko brick size.
After we spot the momentum divergence an entry signal is triggered once we get a reversal. On the Renko chart, a trend reversal is set in motion once the brick changes color. In this case, when we spot a bearish divergence, enter a short position after the brick turns red.
For bullish divergence, wait for the brick to turn green.
We exit our profitable trade once another reversal pattern is formed in the opposite direction of our trade. As a method to protect our account balance and not lose too much, you can place your SL above and below the swing point developed after your entry.
A lot of the noise inherent in regular time-based charts are eradicated. So, if you trade with Renko charts, spotting divergence and trend reversals are a lot easier. The RSI is the best indicator to use with Renko.
Read the previous Renko Chart post to learn about Renko chart system.
Renko
EURUSD 1H RENKO CHARTRenko Trading Strategy #1
This profitable Renko strategy you can use is to focus only on the bricks.
No additional technical tool is required for this system.
We’re going to explore a very simple and yet very powerful Renko chart pattern that incorporates the wicks. This Renko price pattern looks for two consecutive bricks of the same color and both bricks have wicks.
The location of this Renko pattern doesn’t really matter. It can be at the end or middle of a trend. This pattern has a very high rate of success if traded in the right context. You have to look around these two brick patterns and make sure the blocks are not moving back and forth within a trading range.
If that’s not the case, then you have a green light to take the signal generated by this trade setup.
The entry is on the third brick after the two bricks that have wicks. The stop loss can be placed above the wicks and exit once a reversal pattern is produced.
Conclusion – Renko Trading Strategy
Renko bars ensure that you have a cleaner and neater representation of price action. If you’re having a hard time reading the price on a candlestick chart, maybe it’s time to look in another direction. Trading with our profitable Renko strategy can be the perfect fit for you.
We truly believe that Forex Renko charts are more suitable for traders who still struggle to analyze a candlestick chart. The Renko trading strategies presented through this trading guide are just an introduction into the world of Renko bricks. We hope you now have a clear idea of what the possibilities are by using this new charting technique.
When you’re actively trading the markets (scalping, day trading) it’s important to have a methodology to clear out the market noise. The Renko trading strategy is time-independent and gives you an eccentric way to view price action.
Even though the free Renko charts can be used across different asset classes, including cryptocurrencies our simple Renko system is designed, but not limited, to be used in the Forex market.
What are Renko Charts?
A Renko chart is a technical tool or a type of chart that is built by only using price data. Unlike the Japanese candlestick charts, which are built using price, time and volume, the Renko chart only measures price movement.
Renko has no time dimension.
Renko charts are not some long-hidden secrets dating back to feudal Japan times as some trading gurus would like you to believe. Renko bars were actually developed several decades ago.
The name Renko means brick in Japanese and comes from the word “renga.” These charts are sometimes referred to as brick charts by traders.
Steve Nison who is the father of modern candlestick charting is the man who actually made Renko charts forex known to the general public. These charts are often compared to traditional candlesticks but have some key differences. While candlestick charts have varying lengths of “wicks” throughout, Renko bricks are all the same size.
The simplified bricks found in Renko charts make it easier to read the market and make quick decisions. These charts are ideal for day traders, though they can be used by traders using any timeframe. By removing the noisier parts of the candlestick chart that apply to longer-term trading strategies, Renko charts make it possible to determine where the market is actually moving.
Every candlestick on the Renko chart is called a brick because it has the shape of a building brick. The rectangular bricks used for building walls are about the same size. The same goes with Renko charts; every brick is the same size. The size of a Renko brick is pre-determined by the user.
How to Read and Build a Renko Trading Chart
Reading a Renko chart is simple. Because the bricks have a fixed size, they can all easily be compared to one another. The color (and direction) of the Renko brick will change once the value of the previous brick has been exceeded. This indicates to traders that trends are changing and that the price is likely to swing in the opposite direction.
Each brick represents a price range (example – $0.25). However, while the bricks are evenly sized within the same graph, they can be adjusted to your trading objectives. Individuals opening and holding longer, high-cap positions will use different brick sizes than penny stock day traders.
We recommend using the average true range—or, ATR for short—in order to construct each brick. The ATR is derived from the closing price of the stock. This means that a Renko chart is a lagging indicator. In the next step, we will show you how to read Renko bars.
Note #1: if you use Renko bars with wicks or tails, then some bricks may display additional wicks either at the top or the bottom of a brick. But the brick size remains the same.
On the Tradingview charting platform you can go to Chart Settings – Style – Wick, and select which way you want the bricks to be displayed, with or without wicks.
Before returning to the Renko bricks with wicks, let’s give you the basics or the foundation of a Renko brick.
We already established that the brick size is pre-determined by the user. If you’re trading with Renko charts, and your preferred brick size is 20 pips, then bricks only form when price moved either up or down by 20 pips.
The best way to illustrate this concept is to look at Renko blocks through the eyes of the candlestick charts. In the EUR/USD 5-minute candlestick chart below, we highlighted areas of 20 pips worth of price movement.
A green Renko brick would form only after the price will advance 20 pips. Conversely, a red Renko brick would form only after the price declines 20 pips.
As you can tell, the time intervals between each brick are inconsistent.
It’s clear that Renko is less noisy and cuts through a lot of the noise between the swing low and swing highs.
Important note: When you trade with Renko charts, the price needs to travel double the price distance of your brick size in order for the Renko brick to change color.
For example, if the brick size remains 20, it means that we need to actually move 40 pips for a red brick to be printed after we had a green brick.
Let’s return for a second to why some blocks have wicks?
Trading Renko charts with wicks can be a very powerful tool in your trading arsenal. Bricks with wicks give us further clues on the battle between the bulls and the bears.
A wick is printed on a Renko brick only when there is a strong attempt to produce a reversal (a change of brick’s color from green to red and vice versa), but it fails. The wick will simply show you how many pips it went in the opposite direction.
Note #3: a wick is printed on a brick only when the price moves in the opposite direction of the previous candle by at least the length of the brick size +1.
Let’s see how you can optimize the Renko block, and how to choose the right Renko brick size.
How to choose the right Renko Brick Size?
If you don’t know what the right size for Renko charts is then, we have a solution.
If we want a dynamic reading of the price through the Renko blocks, we can use a brick size that is determined by the ATR (Average True Range). Instead of picking a random brick size, this will give you dynamic support and resistance levels that are more accurate.
The ATR will automatically detect the right brick size that is more in tune with the price action.
Note #4: The disadvantage of using an ATR based Renko chart size is that when the ATR value changes, your Renko bricks are redrawn again to reflect the new changes.
When selecting your Renko brick size, ask yourself the following questions:
What are my objectives as a trader?
What are my time constraints? What is the cost of trading?
Am I opening small positions or larger positions?
Do I consider myself risk-tolerant or risk-averse?
If you are pursuing large, lower-risk positions over longer periods of time, then it will make sense to use a larger Renko brick size. On the other hand, if you are pursuing high-risk positions that require paying close attention to volatility, then smaller bricks will be better.
Make faster decision with RENKO OHLCOn March 3, 2020 TradingView started supporting OHLC for Renko charting. Prior to this, only CLOSE of candle was available. Using OHLC provides faster signal to get in and out of trade, compared to using CLOSE.
Renko chart using OHLC
Renko Chart using CLOSE
Happy trading!
Massive sequence of RSI-Renko DIVINE™ Scalps Following Iran NewsThere were a total of 250-270 points of NQ scalps after the Iran missile strikes going long. If you held the first contract long on the swing trade (1st trade in the direction of the new trend is always the swing trade, marked by a fat arrow) you would have gained another 270 points.
Renko Dynamic Index and Zones - Video 3Continuing on trade ideas from video 2 for Renko Dynamic Index and Renko Dynamic Index Zones using a few simple rules.
Other indicators powered by the Renko Engine :
Renko RSI
Renko Trend Momentum
Renko Weis/Ord Wave Volume
Renko MACD and Renko MACD Overlay
Strategies:
RSI-RENKO DIVINE™ Strategy
Renko Dynamic Index and Zones - Video 2I start getting into how I trade the Renko Dynamic Index and Renko Dynamic Index Zones using a few simple rules. I introduce some new coloring schemes and trade direction discovery algorithms.
Other indicators powered by the Renko Engine :
Renko RSI
Renko Trend Momentum
Renko Weis/Ord Wave Volume
Renko MACD and Renko MACD Overlay
Strategies:
RSI-RENKO DIVINE™ Strategy
A Renko Strategy for Trading - Part 9This is intended more as educational material on a strategy for using renko charts. To begin with, I'll be using USOil in the examples but will include other markets as I continue through the series. The material is not intended to prescribe or recommend actual trades as the decision to place trades is the responsibility of each individual who trades as they assume all risks for their own positions and accounts.
Chart setup :
(Part 1)
Double Exponential Moving Average (DEMA) 12 black line
Double Exponential Moving Average (DEMA) 20 red line
Parabolic SAR (PSAR) 0.09/0.09/.23 blue circles
Simple Moving Average (SA) 20 blue line
(Part 2)
Stochastics 5, 3, 3 with boundaries 80/20 dark blue/light blue
Stochastics 50, 3, 3 with boundaries 55/45 red
Overlay these two on one indicator. Refer to 'Part 2' as to how to do this
(Part 3)
True Strength Indicator (TSI) 14/4/4 dark blue/ red
Directional Movement Indicator DMI 14/14 ADX-dark green, +DI-dark blue, -DI-red
Renko Chart Settings
Crude Oil (TVC:USOil): renko/traditional/blksize .05/.10/.25
Natural Gas (ngas): renko/traditional/blksize .005/.010/.025
Soybeans/Wheat/Corn (soybnusd/wheatusd/cornusd): can use the ngas setup
S&P 500 (spx500usd): renko/traditional/blksize 2.5/5.0/12.5
Euros (EURUSD): renko/traditional/blksize .0005/.0010/.0025
Renko Percentage Move Based SystemThe (Al Nami Quantum Blocks v.4) script is based on Renko chart that is based on % move of the selected symbol. This is different from the traditional or ATR based Renko charts..
box size = user selected percentage x current price
Alnami Quantum Blocks Channel is composed of 5 levels that are calculated based on the box size:
1- Base
2- Green Box High (GBH) = Base + box size
3- Next Green Box trigger (GBN) = base + (box size x 2)
4- Red Box Low (RBL) = Base - box size
5- Next Red Box trigger (RBN) = base - (box size x 2)
Those levels will appear in the chart with the following order:
------GBN-------
------GBH-------
------BASE------
------RBL-------
------RBN-------
Usually when prices are trending up, the price will stay above the base for most of the time,, when it trending downwards, price stays below base most of the time..
Now how to time your entries based on the channel? This system is equipped with 4 strategies:
1) New Green Box:
When the channel draw a new green box, place a buy order
When the channel draw a new red box after a green box, place a sell order
2) Retracement:
The user have to select one of the above 5 levels to serve as a retracement level, namely, GBN-GBH-Base-RBL-RBN
When the current box is green and low price crosses below the selected level, place a limit buy order at the selected level
When the channel draw a new red box after a green box, place a sell order
3) Auto-Trailing System:
This strategy draws two levels based on a proprietary quantitative algorithm.
When the background color change to green, prices are moving in an upward trend
When the background color change to red, prices are moving in an downward trend
When the background color change to black, prices are moving in range
If the price is above both lines, place a buy order
If the price is below the lower line, place a sell order
Happy trading,
Abdullah Al-Nami
A Renko Strategy for Trading - Part 7 Refactor/RefinementThis is intended more as educational material on a strategy for using renko charts. To begin with, I'll be using USOil in the examples but will include other markets as I continue through the series. The material is not intended to prescribe or recommend actual trades as the decision to place trades is the responsibility of each individual who trades as they assume all risks for their own positions and accounts.
(Part 1)
Double Exponential Moving Average (DEMA) 12 black line
Double Exponential Moving Average (DEMA) 20 red line
Parabolic SAR (PSAR) 0.09/0.09/.23 blue circles
Simple Moving Average (SA) 20 blue line
(Part 2)
Stochastics 5, 3, 3 with boundaries 80/20 dark blue/light blue
Stochastics 50, 3, 3 with boundaries 55/45 red
Overlay these two on one indicator. Refer to 'Part 2' as to how to do this
(Part 3)
True Strength Indicator (TSI) 14/4/4 dark blue/ red
Directional Movement Indicator DMI 14/14 ADX-dark green, +DI-dark blue, -DI-red
A Renko Strategy for Trading - Part 6This is intended more as educational material on a strategy for using renko charts. To begin with, I'll be using USOil in the examples but will include other markets as I continue through the series. The material is not intended to prescribe or recommend actual trades as the decision to place trades is the responsibility of each individual who trades as they assume all risks for their own positions and accounts.
Chart setup:
(Part 1)
Double Exponential Moving Average (DEMA) 12 black line
Double Exponential Moving Average (DEMA) 20 red line
Parabolic SAR (PSAR) 0.09/0.09/.23 blue circles
Simple Moving Average (SA) 20 blue line
(Part 2)
Stochastics 5, 3, 3 with boundaries 80/20 dark blue/light blue
Stochastics 50, 3, 3 with boundaries 55/45 red
Overlay these two on one indicator. Refer to 'Part 2' as to how to do this
(Part 3)
True Strength Indicator (TSI) 14/4/4 dark blue/ red
Directional Movement Indicator DMI 14/14 ADX-dark green, +DI-dark blue, -DI-red
Part 6
Only use 2 block sizes SxS to trade with. One for placing orders and one to confirm plan
Previously I had many different block size charts of the same instrument but I think that causes more confusion the benefit
Set interval to 1 minute for all charts and block sizes
Potential block sizes to consider or experiment with:
Crude Oil: .10/.20
Currencies: .0005/.0010
BTCUSD: 10/20
SPX500: 2.5/5.0
Ags: .005/.010
I use BTCUSD for training purposes along with the TV paper trading capabilities.
Recap:
Basic analogy is that of an unconscious patient brought into an emergency department and a triage is performed to determine a plan of treatment. In this scenario, price is the patient, the indicators are probes and tests against the patient, and you're the ED physician performing the triage with the treatment plan the trading plan.
This is a reactive type of trading plan. Based on observation of price, volume and indicators, a reactive order is placed with a somewhat tight stop
Depending on trading style or success rate the exit strategy could be either a target method or trailing stop strategy
There are guidelines for adding positions or re-entry based on choice in previous step
Basic Strategy:
Buying
(basic)
12/20 DEMA where 12 crosses up over the 20 and + 1 block
(filters)
PSAR and price have swapped where price is greater than PSAR
Stoch (short term - blue) is or has recently crossed from near 0 up over 20
Stoch (long term - red) is or has recently crossed from near 0 up over 20
TSI (blue) has crossed up over the signal line (red)
DMI +DI moving up with -DI dropping. Ideally +DI crossed up over -DI at or soon after DEMA cross
A Renko Strategy for Trading - Part 5This is intended more as educational material on a strategy for using renko charts. To begin with, I'll be using USOil in the examples but will include other markets as I continue through the series. The material is not intended to prescribe or recommend actual trades as the decision to place trades is the responsibility of each individual who trades as they assume all risks for their own positions and accounts.
Chart setup:
(Part 1)
Double Exponential Moving Average (DEMA) 12 black line
Double Exponential Moving Average (DEMA) 20 red line
Parabolic SAR (PSAR) 0.09/0.09/.23 blue circles
Simple Moving Average (SA) 20 blue line
(Part 2)
Stochastics 5, 3, 3 with boundaries 80/20 dark blue/light blue
Stochastics 50, 3, 3 with boundaries 55/45 red
Overlay these two on one indicator. Refer to 'Part 2' as to how to do this
(Part 3)
True Strength Indicator (TSI) 14/4/4 dark blue/ red
Directional Movement Indicator DMI 14/14 ADX-dark green, +DI-dark blue, -DI-red
A Renko Strategy for Trading - Part 1This is intended more as educational material on a strategy for using renko charts. To begin with, I'll be using USOil in the examples but will include other markets as I continue through the series. The material is not intended to prescribe or recommend actual trades as the decision to place trades is the responsibility of each individual who trades as they assume all risks for their own positions and accounts.
RENKO Set and Forget Trading for Big market moovesThis system combined with the tools available on Trading view
ie Renko Charts , the correct EMAs and Alerts make the Ultimate set and forget proven Trading System
This system will have you on the right side of the market
Where to enter and where to get out
Make the most of your Trading view features
Using Renko to get support/resistance levelsThis is practicing IchimokuScholar's strategy of using Renko to get SR levels. AFAIK, you may get the following settings for it:
* Traditional, 1% of first day's closing value
* ATR, 0.5 (can set ATR value to whatever you like—I'm still reading on this)
* Red line, weekly SR
* Greens, HH... possible levels for counter trend confirmation or confidence gainer