Get started

1d

EURCHF 1D RANGE TRADINGRanges are repeatable trading chart patterns. Ranges are consolidation chart patterns that can breakout either direction. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
by Tradingstrategyguides
Bitcoin price reset to 45K, 40K and posible 30KPosible reset of BTC to 45K, 40K and 30K is posible. BTC reatched the max history price in the half of month with the same size of Junuary. This analysis is caused by: The BTCDOWNUSDT interest was increased with a record volume in the actual price range and the BTCUPUSDT was decreased in the max with high volume. The DXY probably start a bullshit career. The volume of the latest values was decreased for BTC. The Tesla FOMO caused by Elon Musk Twitter and buy of Tesla.
Short
by ZettaOne
1
LTCUSD 1D TRIANGLE BREAKOUTTriangle are repeatable trading chart patterns. Triangles are consolidation chart patterns that can breakout either direction. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
COINBASE:LTCUSD
by Tradingstrategyguides
GBPNZD 1D RANGE TRADINGRanges are repeatable trading chart patterns. Ranges are consolidation chart patterns that can breakout either direction. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
by Tradingstrategyguides
EURUSD 1D MEAN REVERSION TRADING STRATEGYBest Mean Reversion Strategy: Before we get to that point, first and foremost, let’s see what tools we need to use for this strategy. The best mean reversion indicator that works 85% of the time is the RSI indicator. So, you will need the RSI oscillator on your charts. Now, there is one more important thing that needs to be done. The RSI settings must be changed from the default 14-period to 2-period RSI. So, we’re having not just any type of RSI, but a very fast RSI. Levels are 10 & 90. The other technical indicators we’re going to deploy on the charts are: 10-period simple moving average. 200-period moving average. Note* Another thing to keep in mind is the recommended time frame is the daily chart. Intraday charts won’t work because the fast-period RSI will generate a lot of false signals on lower time frames. Now, let’s see how we can combine the 3 indicators into a profitable mean reversion strategy. The first obvious question is when to buy and sell currency. To answer this question the mean reversion trading strategy needs to satisfy 3 triggers: The price needs to be above the 200-day EMA. This means that the overall price is in an uptrend so, we’re only going to look for buy signals in bull markets. Second, we look for the price to below the 10-day SMA, which shows a deviation from its mean. Last but not least, we look at the RSI to overshoot below 10, which signals that we’re in oversold territory. Note* For sell signals use the same trading rules but in reverse. Once all 3 conditions are satisfied we enter a trade at the open of the following day. Once we’re in a trade we also need, we also need to know when to exit the market. This is where the 10-period simple moving average comes into play again. What we’re looking for is for the price to reverse back to the 10-period SMA strategy. More often than not the price will overshoot to the upside and break above the 10-period SMA. So, to fully capitalize on the entire move we use multiple take profit targets: The first profit target is to cash half of the position once we touch the 10-period SMA. The second portion of your position is left until we break and close above the 10-period SMA. Based on our backtesting result, on average your trades should reach the second target within 1-3 days. The longer you keep your position open, the lower the chances of the trade to succeed. As a general rule, you should cash out of your entire position within the first 3 trading days. Now, we have left out for last the most important part, which is managing risk. When it comes to the protective stop loss we’re advising not to place a stop loss right away, but instead, use a time stop. Let me explain… Based on our backtesting results we have found that a lot of the times the market will do a false breakout below the previous day low (high) and hurt our position. So, to avoid this scenario we have found a great trick to move around it. Our rule is very simple: If by the first half of the day our position shows a loss, we close that trade and call it a day. This is a risky play but we have the edge on our side to play this kind of trick. After all, trading is a risky game and everyone needs to decide for themselves how to manage risk. Final Words – Best Mean Reversion Strategy In summary, the most alluring thing about mean reversion trading is the high win-loss ratio and the simplicity behind it. One thing to keep in mind is that the mean reversion strategy tends to perform poorly when the market is in a hard-mode trend. But that shouldn’t be much of a big deal since the market is ranging 75% of the time. The key takeaways from the mean reversion trading strategy are as follow: Mean reversion can be used with all asset classes (stocks, commodities, currencies or cryptocurrencies). Range trading and overbought/oversold signals work the best with this method. Adjust the RSI settings to a fast-period. You can generate quick profits – short holding time periods. A trading tip – use a time stop instead of a price stop. Thank you for reading! Mean Reversion Trading Strategy with a Sneaky Secret. In this guide, you’ll learn a mean reversion trading strategy with some trading secrets that will assist you to limit the downside. The first part of the guide will highlight what is mean reversion trading, while in the second part we’ll reveal the mean reversion strategy and how you can fine-tune it to fit your personality. If this is your first time on our website, our team at Trading Strategy Guides welcomes you. Make sure you hit the subscribe button, so you get your Free Trading Strategy every week directly into your email box. The mean reversion trading systems are more appealing to a lot of traders because it tends to have a higher win rate as opposed to the trend following strategies. Even when the markets are in well-established trends, mean reversion happens quite often. So, there are more opportunities to profit from mean reversion trading. Let’s kick the ball rolling and start with the basic by first explaining what is mean reversion in trading and then we’re going to reveal 5 trading principles that can be used with the mean reversion strategy. Table of Contents 1 What is Mean Reversion Trading? 2 How Mean Reversion Trading Works? 3 Why the Mean Reversion Strategy Works? 4 Mean Reversion Trading Strategy 5 Final Words – Best Mean Reversion Strategy What is Mean Reversion Trading? Put it simply; mean reversion trading assumes that over time the prices of any asset (stock, commodity, FX currency or cryptocurrency) in time will revert back to the mean or average price. In other words, reversion to the mean trading comes down to the old saying: “What goes up must come down.” The mean reversion theory is at the foundation of many trading strategies that involve buying and selling of those asset class prices that have deviated from their historical averages. The idea is that in the long-term prices will return back to their previous average prices and normal pattern. Example of mean reversion trading strategies includes: Reversals. Pullback trading. Retracement. Range trading system. Overbought and oversold strategies. Our best mean reversion strategy is to trade those price ranges that occur after a severe price markup or markdown. In this case, reversion to the mean implies trading around the middle of the range as our average price. In essence, mean reversion is playing around a central value be it the middle of the range, or a moving average, or however you wish to express it. The reversion to mean trading system tends to produce a higher win rate in those instances where we can notice extreme changes in the price. We can measure extreme price changes relative to the time frame used. Obviously, there is also a probability that the price will not revert back to its mean. This can indicate that there is a real shift in the market sentiment and we’re in a new paradigm. Now that we know what is mean reversion trading, let’s see how the mean reversion regression works. How Mean Reversion Trading Works? With mean reversion, we’re looking to trade against the heard. A lot of the times when you’re doing mean reversion trading, you’ll be quick in-and-out of a trade. That’s why day trading mean reversion strategy works better. There are other different ways to trade with the mean reversion strategy, including: Price stretch from a simple moving average strategy. A break outside the Bollinger Bands strategy and a return back to the mean. A test of support and resistance strategy while the price is consolidating. The linear regression is clearly slopping upwards and it’s acting as a magnet to the price. Each time the price deviates from the average price line it snaps back to it outlining the reversion to the mean concept. The main advantages of the mean reversion strategy include: Effective exit strategy – the take profit target is always the average price. High win rate – the shorter the mean reversion time frame used the higher the win rate. Good risk-adjusted returns. All trading strategies have their own pros and cons. The biggest flaw is that once you’re in a trade you’ll often see first a loss before you see a profit. The main components of the mean reversion strategy should include: 1. Entry signal after the price has moved away from its average price. You can simply calculate how far away percentage-wise are from the mean or use an ATR strategy multiple declines or simply use a volume oscillator to gauge oversold/overbought readings. 2. Exit signal gives you a way out once you get into a trade. 3. Broad market timing. Why the Mean Reversion Strategy Works? Mean reversion is a key element part of how all financial markets work. Mean reversion happens because the prices have a tendency to overshoot and undershoot their intrinsic value. These “price anomalies” happens because the impact of new information that hits the market takes time to be digested by the market. The market participants will take some time to understand the new information as the information is filtered slowly. Additionally, it takes time for the market to establish a fair value. Secondly, mean reversion trading also works because prices also move based on collective emotions. What this means for traders is that the price tends to overshoot to the downside a bit more than they overshoot to the upside. This is true because fear tends to be a bigger emotion than greed. Let’s put the puzzle pieces together and construct our reversion to the mean trading strategy.
Education
by Tradingstrategyguides
3
AMZN 1D ASCENDING TRIANGLEAscending Triangle are repeatable trading chart patterns. Ascending chart patterns will have a directional bias depending on the previous incoming trend. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
NASDAQ:AMZNLong
by Tradingstrategyguides
CHFJPY 1D RANGE TRADINGRanges are repeatable trading chart patterns. Ranges are consolidation chart patterns that can breakout either direction. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
by Tradingstrategyguides
PALLADIUM 1D BEAR FLAGBear Flags are a Range type of chart pattern. Bear Flag Ranges are repeatable trading chart patterns. Bear Flag chart patterns will have a directional bias (Short) depending on the previous incoming trend. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
OANDA:XPDUSDShort
by Tradingstrategyguides
CADJPY 1D RANGE BREAKOUTRanges are repeatable trading chart patterns. Ranges are consolidation chart patterns that can breakout either direction. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
by Tradingstrategyguides
NATURAL GAS 1D BULL FLAG LONGBull Flags are a Range pattern and are a repeatable trading chart pattern. Bull Flag chart patterns will have a directional bias (Long) depending on the previous incoming trend. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
NLong
by Tradingstrategyguides
4
NZDCHF 1D RANGE TRADINGRanges are repeatable trading chart patterns. Ranges are consolidation chart patterns that can breakout either direction. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
by Tradingstrategyguides
NATURAL GAS 1D BULL FLAG LONG TRADEBull Flags are a Range which are repeatable trading chart patterns. Bull Flags are a descending chart pattern which will have a directional bias (Long) depending on the previous incoming trend. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
MCX:NATURALGAS1!Long
by Tradingstrategyguides
USDJPY 1D RANGE TRADINGRanges are repeatable trading chart patterns. Ranges are consolidation chart patterns that can breakout either direction. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
by Tradingstrategyguides
APPLE 1D ASCENDING TRIANGLE BREAKOUTAscending Triangles are repeatable trading chart patterns. Ascending chart patterns will have a directional bias depending on the previous incoming trend. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
NASDAQ:AAPLLong
by Tradingstrategyguides