HOW TO: Center Of Gravity OscillatorIf I could only have one indicator it would need to be versatile. It would need to able to confirm trends, highlight pivots and reversals but most of all it would need to expose epic entries. Lucky there is such an indicator... The Center of Gravity Oscillator (COG).
The COG is yet another masterpiece created by John Ehlers. It is essentially zero lag and enables clear identification of turning points. This indicator is a result of Ehlers research into adaptive filters and was published in an article on page 20 of the May 2002 issue of Stocks and Commodities Magazine. According to the Tradingview docs "The cog (center of gravity) is an indicator based on statistics and the Fibonacci golden ratio."
1. Breakout Trading
Breakout trading is one of the most popular trading strategies and rightly so, there is not much better than watching those candles fly to the moon.
Trend lines and wedges can be made by connecting 2 or more pivot points (as shown above). When the oscillator crosses the trend line traders can expect “boom” like explosions in price action.
Above is an example of a breakout.
Below I’ve marked out some breakouts on 1 hr BTC chart.
Epic breakouts can be found by drawing a trend line along major pivot points. The major pivots should be easy to spot as they stick out above and below the minor pivots. (As shown below on 1 hour chart.)
There are many oscillators that can also pick up breakouts, below are some breakouts marked on the BTC 12 hour chart with my Volatility Oscillator.
Smaller breakouts can be found by drawing a fan from major pivot to minor pivots.
Ive marked out the most obvious breakouts on the ETH Daily chart below.
Along the way I found some LSMA pumps, which leads me to the next strategy…
2. LSMA Breakouts.
Least Squares Moving Average is my favourite moving average and I incorporate it in one way or another with most of my scripts. To understand a LSMA breakout have a look at the LSMA 21 line on the chart below. As the candles cross the line it breaks out.
The default setting for the LSMA line on my COG indicator is 200. This is a great “zero” line and shows general trend. To catch LSMA breakouts I set the COG length to 6 and LSMA length to 6. The LSMA can also be set to 21 to find breakouts and LSMA Pumps (don’t worry, I’ll get to it soon).
Easy to find sweet entries on the BTC 1 hr chart.
3. What is a LSMA pump???
This is when a LSMA line pulls back and crosses another line for just a few bars before recrossing into a boom. Ive marked out a few LSMA pumps on the chart above. I like to use COG set at length of 6 and LSMA set to 21 for trading hourly to daily charts.
4. Trading Reversal Patterns.
If you are not familiar with reversal patterns such as double tops, double bottoms or head and shoulders then it would be a good idea to look into it. These are fundamentals of reading charts.
The COG is great for trading these patters too.
Above shows reversal patterns marked out.
5. Previous High/Low Strategy
This is another chart reading fundamental. This strategy can be used to find solid long and short entries. He is an example below using no indicators.
This example is a down trend that turns into an up trend. The first entry is a short found when price is unable to beat previous high. The second entry is a long. This is the confirmation of the up trend. Notice how the the low pivot point is higher than previous pivot. Next a short reveals itself again as price is unable to beat previous highs. The next long entry is made as up trend is reconfirmed by a low pivot forming higher than previous low pivot. Lastly another short as price is unable to beat previous high.
Now to apply this to the COG…
Above shows a nice long and short on the major pivots. The first trade is a long. As the major low pivot is made it does not break previous major pivot low and thus is a great long entry. Price then breaks out and forms a major high pivot point which does not break previous major pivot high making a great short entry.
The next example shows trading on continuations of trends.
A major Pivot is made. Long entries are found every time the the lows keep getting higher. Often these are LSMA pumps.
Above is another example of finding solid entries.
Here I have marked the entries on a 1 hour ETH chart using this strategy. It is great for swing trading.
6. Tuning your indicator.
Indicator settings should depend on what timeframe and what trades you are looking for. Its always a great idea to play with the settings and get the signals as accurate as possible.
COG lengths to try: 3-6, 9-14, 21-27, 50-55, 100, 200.
LSMA lengths to try: 2,6,9,11,19,21,25,27,32,50,100,150,200
In the indicator settings there is an option for smoothing. I usually have this turned on.
The centre of gravity oscillator is one of the most underrated indicators out. It gives solid signals and Im sure there is plenty more that I have not mentioned here. I am currently working on including all these signals into the indicator so you can set alerts or run bots. So far it looks like a Christmas tree with all those signals and needs work….
If you have any questions or ideas please drop a comment below. I am always keen to talk shop.
You can find my COG indicator here:
Join me on Bybit! They have the lowest fees and best servers. It’s free to join and we both get $20 if you use my referral link.
partner.bybit.com
Thanks for the support and happy trading!
Howto
The 8 Universal Rules of Successful TradingUTPs (Universal Trading Principles) are a set of trading rules you must not break. They cover entries, exits, strategies, and risk management. They form the backbone of your trading plan. Repeat these rules everyday, like a mantra, until you can recite them in your sleep. This will make you a successful trader.
1. Don't leave money on the table - I move my SLs to breakeven and lock in profits as the trade goes in my direction. The first rule of trading is to protect my trading capital. Without my capital, I am out of the game and cannot be a trader. So I do everything possible to protect it.
2. I scale in and out of trades - If my trade idea seems to work, I add to my position. If my trade doesn't work and approaches my SL, I am reducing my position. I am ALWAYS adding to working trades and NEVER to losing trades. This is how the most successful traders trade, and this is how I want to trade.
3. Final TPs - My final TP is based on horizontal S/R levels, weekly or monthly highs and lows. I confirm that markets are mostly ranging, i.e. my final TPs are always based on the normal distribution (e.g. weekly or monthly ATR). My TPs need to be REALISTIC.
4. Technicals are used only for entries and exits. The direction of the market is determined by fundamentals. I never trade against the fundamentals.
5. Position sizing - My stop-losses are always based on sound technical levels. My position size depends on the size of the stop-loss and the percentage of my trading account I want to risk on any single trade. I never risk more than 2% on a trade, and cut the risk-per-trade to 1% after a series of three losing trades.
6. Trading is a probability game - I acknowledge that successful trading is about probabilities. I don't know whether my next trade will be a winner, but I do know that I have a good chance to be in profit after the next 10 trades.
7. Trading is as simple as you make it - Fundamentals support my trades, but everything can happen (including a change of fundamentals and sentiment). Risk management prevents higher losses. There are always new opportunities. My goal isn't to be right, but to follow my UTPs.
8. Weekly journal reviews - I don't measure trading success by the profits I've made or the number of winning trades. My success is measured by how strictly I followed my UTPs. To review my trading, I am performing weekly journal reviews and try to identify any trading patterns that have a negative influence on my bottom line.
How to see Nothing . June 3 market recap snapshot thingyNothing but homage and apologies for not saying nothing about nothing in the video. I also don't know if you can hear nothing or not so let me know in the comments. It's my first time trying trying in a while.
Markets are still at ath's. So u be usa. I'm gonna say that alot. But I'm buy low sell high step one mechanics.
Step two follow tastytrade. I like forex but tasty makes it make sense. It's like a cracker with fiber, gets you going, in a good way.
Step three, i'm bad at things, but god bless options, you'll see. Good luck! Say something or nothing in the comments thanks.
US 2000/ sm75
DXY
EURUSD
GBPJPY
AUDCAD
GOLD
SILVER
CL
BTC
DOGE
Using the Relative Strength Index (RSI)Using the Relative Strength Index
The Relative Strength Index (RSI) is a very popular and often used indicator that can be used effectively in many different ways. My personal favorite two are:
1. As a tool to indicate a reversal. This is the most popular way.
2. As a momentum indicator. This is what it was designed for.
Below we will discuss how to read the RSI, and how to set it properly depending on market conditions.
What the numbers mean
Before we discuss what to do with the information that the RSI gives us, we should learn what the numbers mean.
The RSI is a line graph that moves from 0 to 100. When the RSI is 70 or over, we consider our crypto to be overbought (people bidding up the price). Then when the RSI is 30 or below, we consider our crypto to be oversold (people bidding down the price).
Overbought means that the crypto might be overvalued.
Oversold is the reverse. The crypto might be undervalued.
The actual number is calculated using the average gain or loss over a set period of time. The default time period is 14 (minutes, hours, days, based on how the chart you are currently looking at is set).
You could also set your period length to a lower number, I use 10 sometimes, so that the RSI is more sensitive to recent moves. This is good to do in markets that are highly volatile (crypto for example).
The actual RSI number will increase as there are more and more positive closes within your time period, and will fall as there are more and more negative closes within your time period.
As with every trading indicator, the RSI should not be used as the sole reason for a trading decision. It helps paint a picture of the market of the particular crypto you’re looking at.
Nor are the default values always to be used. We’ve discussed time changes, but you could also change the upper and lower bands.
In a bull market you may want to change the upper band to reflect the general trend of the market (more on that later).
Trend Reversal
Now, let’s about how to actually use the RSI. The first way to use it is as a way to spot a possible trend reversal.
Put simply, the RSI can help us see if we have, in the last few candles, changed from an up-trend to a down-trend, or from a down-trend to an up-trend.
When the RSI is below 30 and crosses up, we consider this a bullish move.
When the RSI is above 70 and crosses down, we consider this a bearish move.
Just to reiterate: A bullish cross up is not an automatic buy, just as a bearish cross down is not an automatic sell. As you can see below.
But it is pretty accurate.
Nothing in TA is 100%, but the closer you get to 100% the better trader you will be.
One other thing to note based on the above picture is that there was no time that the RSI dipped below 30. In a crypto bull market (which we are currently in) it is more common to see cryptos that are overbought as opposed to oversold. You can compensate for this by changing the oversold line to 40.
Additionally, as the crypto moves up in price, you can see the RSI making consistent higher lows.
Divergence
One thing to look for when you are trying to spot trend reversals is what is called a Bullish Divergence.
This means that the price of your crypto is in a downtrend and making lower lows. At the same time, the RSI is oversold and is making higher lows.
When you spot this, it can be a very powerful indicator that the trend is reversing to the upside.
A bearish divergence is the same thing but in reverse. The price of the crypto is getting higher and higher while the RSI is overbought and making lower highs.
RSI as a momentum indicator
Another way to effectively use the RSI is by using it for its intended use as a momentum indicator.
As we talked about before, the RSI rises as we have more and more positive closes in our time window. It rises more (faster) when the price movements are more extreme to the upside. The reverse is true for the downside.
So, if we are oversold that means there is momentum to the upside, and if we are overbought that means there is momentum to the downside.
Generally, it is better to trade with the momentum than against it. Unless we spot the reversal signals that we discussed above; crossing back down, or crossing up.
It is also better to go long in bull-markets and short in bear markets when using the RSI in this way.
Let’s take a look at the chart below:
In a bull market the 50-60 range of the RSI acts as support and the RSI usually stays above 40.
I like to set my upper band to 60 in a bull market so I can trade with the bullish momentum and spot potential reversals in the 50-60 range.
As you can see it is necessary to use the RSI differently in different market conditions.
Final thoughts
As you can see there are different ways of successfully using the RSI. I hope I’ve made at least two of those ways clear in this beginner guide.
Please let me know if you have any questions and if you like it, please hit the thumbs up and be sure to follow for more!
Thanks for reading!
CAKEUSDT - How to find a good CAKE entryCAKE and pancakeswap are trending hard right now, its a great defi solution that's innovative and has triple A backing in Binance.
The common thought for most is, how can I get in on that profit?!
One way to do it is buy low, sell high! In order to buy low, you need a good entry, luckily, I think I've found one!
In todays video I go over how I find potential entries for profitable trades and apply it to CAKEUSDT
=== TimeStamps ===
0:00 = Welcome!
0:35 = Patterns
1:20 = Fibs
5:20 = Resistances
7:30 = Price path
11:00 = Entry
12:05 = Stop limit
12:30 = Take profit
14:45 = Fundamentals
15:15 = CoinMarketCap
17:30 = Tradingview ideas
18:50 = CoinMarketCal
19:20 = r/pancakeswap
HOW TO DETECT TARGET ZONES?EURUSD (Forex):
In the chart you can see my trading setup. The middle dotted trend line and the red zone act as resistance. Currently the price is rejected.
First of all, this offers us a short opportunity.
How can you find target zones? ❗️
To find target zones, I usually use distinctive highs and lows. In this case the green support zone. The first profits should then be realized in this zone.
I also use the fibonacci tool to display possible zones in which I can sell. In particular, I pay attention to the 0.5 retracement in combination with the 0.618 retracement. In the chart you can clearly see that these zones roughly correspond to my own drawn zones.
Order box trading This is educational :)
You can see that the price is a bit "blurry" at the first order box. Why is this?
Financial institutes never invest their whole money at the same time to get "stopped out" or "margin called". They do this to check how the price is reacting to their orders. For example, if they want to invest 100 million euros in a long position; firstly 20m, then 30, and then 50.
This "blurr" will form what we call the order box.
Now, what happens?
All of the orders will not go to reality. maybe only 70% will. Then, when the price touches this order box area, the price will bump again as a consequence of all the underlying orders. This is what you see at the "support order box". Same thing at the top.
Steps to spot these:
1, find the "blurr"
2, watch for confirmation (aka = second time it touches)
3, trade the 3rd, or 2nd if u are brave, it touches this box.
4, place stop loss just above the box
But what for take profit?
Place it in either the other side of the box, or eventually, at 0,618 of Fibonacci. I use this to trade with the trend and not against it.
Questions? Ask them in the comment area :D
how to apply fibonacci fans and auto FibFans studyFibonacci Speed and Resistance Fan is an analytical drawing tool used to indicate the support and resistance levels of an existing trend and the price level at which possible changes in the trend may occur.
A Fibonacci Speed Resistance Fan consists of a trend line drawn between two extreme points - a trough and opposing peak or a peak and opposing trough - on which a set of sequential speed resistance lines are drawn above (which represents time) and below (which represents price). These lines are drawn based on time/price percentages of the distance between the beginning and the end of the trend line.
Speed resistance lines not only help to measure trend corrections but also measure the speed of a trend (the rate at which a trendline ascends or descends)
Traders can use the lines of the Fibonacci Speed and Resistance Fan to predict key points of resistance or support, at which they might expect price trends to reverse. Once a trader identifies patterns within a chart, they can use those patterns to predict future price movements and future levels of support and resistance. Traders use the predictions to time their trades
Nobody appears to know whether Fibonacci tools work because markets exhibit some form of natural pattern or because many investors use Fibonacci ratios to predict price movements, making them a self-fulfilling prophecy. In any event, key support and resistance levels tend to occur frequently at the 61.8-percent level (0.618) on both uptrends and downtrends
Fibonacci Speed and Resistance Fans vs. Gann Fans
Gann fans are another form of technical analysis based on the idea that the market is geometric and cyclical in nature. A Gann fan consists of a series of trend lines called Gann angles.
Instead of relying on Fibonacci's golden ratio of 1.618, Gann believed the 45-degree angle (geometric angles of time versus price) to be most important. The Gann fan subsequently draws additional angles at 82.5, 75, 71.25, 63.75, 26.25, 18.75, 15, and 7.5 degrees. These angles are superimposed over a price chart to show potential support and resistance levels
Step By Step Applying Fibonacci Speed and Resistance Fan
Some interpretation examples:
Example of how to identify if the move is Reversal or Retracement
All the above are now available with the Auto Fibonacci Speed and Resistance Fans Study ʙʏ DGT ☼☾,
LINK to Auto Fibonacci Speed and Resistance Fans Study
When Support becomes Resistance, and Resistance becomes SupportHey TradingViewers!
How's it all going!
I was planning my upcoming trades for this week and came across a great example of When Support becomes Resistance, and Resistance becomes Support! I'll explain why i place each of the levels, and why i place them where i do, why that's important and perhaps most importantly, how to trade it! So let's get to it.
I've labelled each of the support, resistance and trend lines with a number starting 0, ending at 5. Let's begin with 0.
I place line 0, simply put, where the price has not been able to push any higher. I place it above the price action, and extend right. This will be our top level resistance.
Line 1 is our downward trend line. I start the line above Line 0 and draw it so that it crosses the tops of the rejected candles. I extend it down and to the right. The reason i place it across the tops of the rejected candles is because each time the price has hit this line, it's been rejected, which is a good sign you have a true resistance trend line.
Line 2 is the first or our horizontal supports. i determine there is support here as price has moved significantly counter to the current trend . I begin the line near to the open or low of the candle, and extend right.
Line 3 is the second of our horizontal supports, and you guessed it, it's been added because price has moved significantly counter to the current trend , and as line 2, I begin the line near to the open or low of the candle, and extend right.
Line 4 is an interesting one, and something to take especial notice of. Line 4 is the first trend line which is uptrending. The reason this is important is that it could be a strong signal that a trend reversal is coming. I place the start of the line at the point, (that's right, you guessed again), where price has moved significantly counter to the current trend , and i extend right, connecting the higher lows.
Line 5 is an extension of Line 3, and a great visual representation of resistance turning into support.
But what are the circles? WHY ARE THERE CIRCLES?
The circles are to identify (in multiple instances) where support has turned into resistance, as in Line 2 and Line 3, and resistance has turned into support, as in Line 5 and also the cross of lines 1 and 4.
So i'm sure some of you are now asking:
"Okay so i know how to place support, resistance and trend lines but how does that help me? Where's the profit in all of this?"
Well I'm glad you asked and it's in a link in the Related Ideas below, called How to identify trades using Support and Resistance.
Thank you all for your time, i hope that it's been helpful,
For_The_Many
Building consistency (intro video)Hey all!
Busy days for us so we couldn't be too active with the videos we release to tradingview! But here is a little glimpse into what we are preparing to release later this week, which would be a "how to" guide on creating consistency in trading!
Good luck and see you all soon!
Things armature traders do, that you must stop!Hey hey!
Happy weekend to all the traders out there!
In this video we go over a little bit of specific education on what failing traders do daily that you need to STOP if you want to get profitable!
We hope that you enjoy the video and do let us know if there is a specific subject you want us to cover in the next one! Just leave a comment below!
How To Trade A Trend Instead Of Catching A Falling KniveHello friends,
it seems like many successful traders fail to determine a proper entry for either a short or a long position.
Please use the tips on the chart to avoid further losses by trying to catch a falling knive.
The price of Gold (XAUUSD) made a breakout of a bull-flag/ ascending channel on the daily. The price action we currently see
might be a re-test of the trendline (as per many idea here on tradingview). But this could also be a simple fakeout, followed by a mid-term trend
change (on the daily in this case).
Nontheless - read the chart and forget any previous predicition you had. Try to rely only on numbers, indicators and a trend.
This will save you A LOT OF CASH! :-) Trust me
cheers,
Ares
How I Analyze Stocks Part 1 Hello followers! It has been an amazing year, I am grateful for tripling my following, being accurate on calls and puts a majority of the time and being able to interact with everyone. I have been receiving a lot of request for how I analyze stocks, how I read candles, and how I obtain different indicators. With this DIY analysis series I will explain exactly what I do when I make my analysis. These indicators help tremendously however nothing is guaranteed. Those who have been following long enough know I was right about TSLA dropping when the Odds were against it, but wrong about my ROKU short when the technicals supported it. Both are linked for reference.
Alright, time to get right into this. This has been broken up into series due to the amount of explaining I will do as I want to be as transparent as possible and help everyone be as successful and profitable as possible.
This will be listed step by step
1. The first thing I do when looking at a stock is looking at the candlestick view and I mostly use the 45min segment as I am a weekly options swing trader. The higher segments you use, the longer term you should expect the price movement and the shorter term you use will be for the shorter term such as day trading
2. The second thing I do is analyze the candles and look for trends or signals. For this example I am using NVDA and I see the latest 45min candle has a long bearish wick and a normal sized bull body. ( Candle anatomy can be learned in 10 min on youtube) Based on this bear wick I see that NVDA is set to trend down. But is that enough to bet on? Of course not, follow and check out the rest of the series to see exactly what I look for.
How to use Fibonacci correction levelsHello, Traders!
Most of you have heard about Fibonacci Retracement, some of you saw it and some even tried to use it on their own charts. So today I am going to explain how to use this instrument correcly.
Traders use the Fib Retracement tool in order to determine the nearest correction levels on the chart,.
If your task is to find out the nearest correction levels of upward movement, the level of 1.0 Fib Retracement. should be at the beginning of the movement and the level of 0 Fib Retracement at the end of it.
In simple words: if you are looking for upward motion correction, then 1.0 should be at the bottom and 0 at the top. If you are looking for a downward correction, then the opposite is 1.0 at the top (start of movement) and 0 at the bottom (end of the movement).
There are three types of correction by Fibonacci levels :
1. Bullish to levels 0,236 and 0,382.
2. Normal correction to the levels 0.50 and 0.618.
3. Bearish correction to 0.786 and 0.860.
When the movement is sharp, most often the correction will be minimal and will end at levels 0.236-0.382.
When the movement is corrected for a longer time, the correction comes to the levels of 0.50-0.618.
If the movement breaks down, the correction ends at levels 0.786-0.860.
In other words, in order to continue upward movement, as in the current BAND chart, we will be interested in levels of at least 0.236-0.318 and 0.50-0.618.
Near level 0.618, it is beneficial to catch the sharp impulses that occur due to the stops of market participants.
If the price movement comes to the level 0.786-0.860, then most often it is already its conclusion and it is dangerous to buy at such levels.
At the current bullish rally, the use of correctional Fibonacci levels will bring good results.
Share your setups in the comments and I would help you understand if you used it correctly!
How To Trade Channels?The above chart shows what is called a “channel” in trading. It is basically diagonal support and resistance (a.k.a Trend-lines). The area in between is known as a channel.
The red zone is said to be the perfect entry area for sells whereas the green is for buys.
How To Find The Zones?
Using the “Parallel Lines” tool, draw the diagonal S/R then measure the first candle/wick that starts the channel and that area is where you would get entries with the least possible drawdown.
Guide: How to post awesome ideas and get lots of likesGeneral guidelines:
To publish awesome ideas and get lots of likes, the first step is for your publications to be visible to the public. This means you need to make sure that your ideas do not get “ hidden ” or “ unsuggested ” for violations of the house rules.
What does hiding an idea mean and what could be the reasons ?
TradingView moderators will hide ideas that violate the house rules, the most common cases are where authors provide links or references to their social media or websites, aiming at self-promotion.
A hidden idea is no longer visible to the public, only to you and to TradingView moderators. Since the idea descriptions cannot be changed either by you or by the TradingView team, these ideas cannot be made visible again, which is a shame for the time you took to analyze and publish it, right? Please read the House Rules carefully to avoid this from happening.
Why can your idea be unsuggested?
TradingView aims at showing ideas that offer a good analysis on the chart and a good description. To achieve that, we “ unsuggest ” ideas that:
Have a title or description in ALL CAPITALS
Have very little or no analysis on the chart
Lack description
Are published in another language than the site it is published on
An “ unsuggested ” idea will not appear on the homepage or in popular ideas streams, which limits its exposure.
It will only be visible in newest idea streams, to users that visit your profile or who have the direct link to your publication.
Let’s go over some examples of what makes a good idea publication. To make it more clear, we’ll also provide an idea that is not the best example for this category.
Click any of the ideas to show more detail.
All Analyses
► Balance: clear, no clutter, professional, not too overwhelming.
Good:
Needs improvement:
Technical Analysis
► Include drawings that explain the idea. At least two analysis tools or two reasons, e.g., a support level and candlestick pattern, or a trend line and an indicator, etc. Use enough, but not too much!
Good:
Needs improvement:
Trading Idea
► Include a specified bias on the idea and disclose if you are long or short. Make sure you let people know where the exit or entry point is on the trade and mention how long the trade could last.
Good:
Needs improvement:
Fundamental Analysis & Market Commentary
► Provide the general trend and approximate price path based on sound reasoning.
Good:
Educational posts
► Detailed explanation of the method for technical, fundamental or macro analysis.
Good:
Inter-Market analysis
► This includes Overlay or Ratio analysis. Call for a directional move with adequate explanation.
Good:
Text Analysis
► Has to be useful and informative to the community. For example, educational material, a column or a personal experience.
Good:
Needs improvement:
More specific suggestions for specific Technical Analysis types
Harmonic patterns
► Price must have at least passed the B-point on its way from C to D. Or there must be other technical tools supporting the view. Use the TradingView built-in tools to show Fibonacci ratios. Useful link: www.harmonictrader.com
Good:
Needs improvement:
Double tops
► Patterns that didn’t complete the second top and are heading to neckline shouldn’t qualify as a double top. Also true for double bottoms.
Good:
Needs improvement:
Head and Shoulders
► Patterns that didn’t complete the right shoulder and are headed towards the neckline don't qualify. Also true for Inverse head and shoulders.
Good:
Needs improvement:
Indicator-only analysis
Needs improvement:
Elliott Wave
► Should align to the rules that can be found on www.elliotwave.com . This is the most common and widely used source.
Good - clear and with an actionable trade setup:
Needs Improvement - cluttered:
Following these guidelines not only will produce better, more actionable ideas for the TradingView audience, it also increases the chance of your idea to be selected for our Editors' Picks .
We hope this guide was useful for you, let us know what you think in the comments below.
Learn the "Gann Fan" in just 3 StepsGann theory has been widely used in various fields of finance. To learn to apply the Gann angle line, two problems need to be solved, namely, point selection and volatility. The question about volatility is in the Gann angle line. This article will mainly talk about the problem of selecting points.
The selection point of the Gann angle line is generally selected from the important top and bottom. When selecting, you can judge which point to choose based on your actual operating experience. But depending on the long-term trend, you can choose the Gann angle line starting from zero, which will play a very important role in future predictions.
We took NASDAQ as an example. In the chart, We have learned how to apply the Gann fan to a chart or the trend. It's complicated, but I tried to make it easy to understand and easy to apply. I have used only 2 to 3 things to perfectly apply the Gann Fan.
Gann fan is useful to all the traders, It can be applied to all the time frame.
In the investment process, Many investors like to buy bottoms. This is everyone's ultimate pursuit. That's because every market has important tops and bottoms. Analysis of this position is to make your own funds safer, with minimal risks and greater profits. These will use the Gann angle line confluence position. The force formed at the intersection of the rising angle line and the falling angle line can often form a reversal trend.
In " Financial Analysis Trends ", the grades are divided as follows:
1×1 intersects with 1×1
1×2 intersects with 2×1
1×3 intersects with 3×1
1×4 and 4×1 intersect
1×1 intersects with 1×2 or 2×1
1×1 intersects with 1×3 or 3×1
1×1 intersects with 1×4 or 4×1
1×2 intersects with 1×4 or 4×1
Above is the information about the Gann fan for education purposes only.