Get started

Tradingstrategyguides

CADJPY 1D RANGE BREAKOUTRanges are repeatable trading chart patterns. Ranges are consolidation chart patterns that can breakout either direction. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
by Tradingstrategyguides
NATURAL GAS 1D BULL FLAG LONGBull Flags are a Range pattern and are a repeatable trading chart pattern. Bull Flag chart patterns will have a directional bias (Long) depending on the previous incoming trend. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
NLong
by Tradingstrategyguides
4
EURUSD 4H FADE ENGULFING STRATEGYEngulfing Trading Strategy The engulfing pattern is fairly regular in its occurrence. Appearing regularly means that a lot of the time, it simply won’t work. Statistically speaking, candlestick patterns have a high failure rate, which is why we come with the idea to fade the engulfing bar pattern. Of course, candlesticks can indeed be useful--but advanced trading strategies will require you to look beyond these basic charts and think deeper. To develop an effective engulfing trading strategy, we need to establish a proper framework to stack the odds in our favor. Step #1 Spot a Sideways Market The first thing we want to look for is a sideways market where no one is in control. This is very important because it’s setting the stage for price manipulation. The premise behind the typical price manipulation is based on the core idea that smart money needs buyers when they want to sell and they need sellers when they want to buy. In this regard, our goal is to identify price areas where the trading volume is flat. Usually, in ranging markets, volume remains mostly flat. Since the market is range-bound around 75% of the time, it will be easy to spot a sideways market, especially on the intraday charts which are prone to exhibit more noise. The natural flow of the price dictates that sooner or later we’re going to see an expansion in volume, which brings us to the second step. Step #2 Localize the Engulfing Pattern The ranging price action needs to be followed by the engulfing pattern. Going on with our EUR/USD chart, we can spot a bearish engulfing pattern. Since we’re still in a range the sellers of the engulfing pattern need to overcome a lot of support/resistance levels that were built-in during the consolidation phase. What happens is that the sellers who got tricked to enter the bearish engulfing pattern are now trapped inside a consolidation zone. One of the first signs that selling the engulfing pattern was a bad idea could be that we didn’t have enough profit margins. Smart money love to create these types of price deceptions. How these price deceptions work is very simple. The smart money needs to create a sudden price movement so that it attracts the retail eye to enter the market. Once the retail trade bites the bullet, smart money only needs now to bid the market higher and cause everyone to panic. This in return will trigger more sell stops on the upside and subsequently, the upside move gets amplified. Now, you might be asking yourself why all the fuss to trick the retail traders? Well, it comes down to two things: The market is a zero-sum game, so every transaction needs to have a counterparty. And, secondly, smart money needs liquidity to execute their big trades. Now, you get the idea of why smart money can use the textbook patterns to trick the retail traders. Next, we need to establish how the engulfing trader strategy works. Step #3 How to Fade the Engulfing Pattern We have a clear signal to enter the market when to price breaks above the high of the bearish engulfing pattern. Normally, traders would sell at the break of the low so we’re doing the exact opposite. Once the price deception is completed, we can see smart money buying aggressively. As a general rule, once we break the high of the bearish engulfing pattern, we should see momentum picking up to the upside. If we see this type of price behavior we’re almost sure we have got a good trade. The next step is to establish how to manage risk, i.e. where to hide our protective stop loss and when to exit the market. Step #4 Where to Place Stop Loss The stop-loss strategy is quite simple. We hide our protective stop loss below the bearish engulfing bar. If this indeed was a price manipulation set by the smart money, then the price should not break below the bearish engulfing candle low. However, since we can’t be 100% in control of what the market does in the eventuality it breaks below the low we want to get out, which is the stop-loss order job to do for us. Step #5 Where to Take Profit Now, in terms of take-profit…. If you want to take your trading to the highest point of success, you need to be able to maximize your profits with each trading opportunity. The good news is that our take profit strategy is quite easy to implement. You’ll have to take profits along the way and scale-out of your position as the trend matures. This ensures you’ll benefit from the entire price move. Conclusion – Engulfing Bar Trading Strategy In summary, the engulfing pattern trading strategy gives you a chance to trade along with the smart money and profit from trapped retail traders. Most traders will lose money when trading candlestick patterns but with a little bit of twist, you can turn the odds in your favor. And, that’s precisely what our easy guide to trading the engulfing pattern is aiming for. Here is a summary of what you have learned so far: The textbook engulfing pattern and how it works. How to interpret the price manipulation around the engulfing bar. How to trade along with the smart money. Only fade the engulfing pattern that develops inside a sideways market. How to maximize your profits by scaling out of your position. Engulfing Trading Strategy - The Fade The engulfing trading strategy will give you the skills you need to become a better trader. Through this guide, we’re going to take a deeper look into what exactly is the engulfing pattern and how understanding this particular pattern can improve your outcomes as a trader. Furthermore, we’re going to show you how to master the engulfing bar trading strategy with a simple twist. Don’t worry if you already know how engulfing trading works, we have some additional information for you as well. This will strengthen your existing knowledge about the engulfing candle trading strategy and help you find new opportunities to succeed as a trader. How we interpret the engulfing pattern can provide us with a further understanding of the current market sentiment, whatever form it might take. In return, this can help us better assess the probabilities of success behind each individual bearish and bullish engulfing pattern. Table of Contents 1 What is the Engulfing Pattern? 2 How to Trade Engulfing Pattern 3 Why the Engulfing Pattern Works? 4 Engulfing Trading Strategy 4.1 Step #1 Spot a Sideways Market 4.2 Step #2 Localize the Engulfing Pattern 4.3 Step #3 How to Fade the Engulfing Pattern 4.4 Step #4 Where to Place Stop Loss and Take Profit 5 Conclusion – Engulfing Bar Trading Strategy What is the Engulfing Pattern? In technical analysis, the engulfing pattern is multiple candlestick patterns (2-candle pattern) that can signal a trend reversal or a trend continuation depending on where it develops in relation to the prevailing trend. While you can find this candlestick price formation by using the engulfing pattern indicator, you can easily spot the pattern with your naked eye. There are two types of engulfing patterns: Bullish engulfing pattern. Bearish engulfing pattern. Being able to identify the engulfing pattern can help us time the market. So, how do we identify the bullish engulfing pattern? The bullish engulfing pattern is a combination of one bearish candlestick followed by a bullish candlestick that engulfs the entire body and wicks of the first candle. This shows that, generally, the broader market is moving in a positive direction. Naturally, it signals a potential reversal of the prevailing trend. On the other hand, the bearish engulfing pattern is the opposite of the bullish engulfing pattern. The bearish engulfing pattern can signal the possible start of a new downtrend. While these engulfing patterns do occur in the opposite direction, they are still governed by the same underlying principles. Moving forward, let’s see the different ways how to trade the engulfing pattern. How to Trade Engulfing Pattern To exemplify how the engulfing pattern works, we’re going to showcase how to trade a bearish engulfing pattern. The opposite will be true for the bullish engulfing pattern. Understanding the difference between bullish patterns and bearish patterns will be key to leveraging engulfing patterns to your advantage. As per the textbook rules, we first need to wait for the second candle of this price formation to close. A close below the low of the first candle shows a stronger bearish signal. Secondly, the engulfing pattern gets confirmed once we break and close below the low of the second candle. The way we trade it can be broken down into two strategies: Either sell right away when we break below the low. Or, a more conservative approach would be to wait for a candle close below the low. Note* As a general rule, only enter once the pattern is confirmed. Using strict risk management rules, we can hide our stop loss above the high of the second candle. Usually, the engulfing pattern can boost attractive risk-reward ratios so you can capture profits at least 3 times your risk. Now, before we reveal the better way to trade the engulfing pattern trading strategy, it’s important to understand what’s going on behind the scene. What do we mean by this? Simply put, we want to know the psychology behind the engulfing pattern. Why the Engulfing Pattern Works? How we interpret the psychology behind the engulfing pattern plays a big role in whether or not the pattern will work out. Price Action Strategy is the ultimate indicator telling you what’s going on in the market. In terms of the market sentiment, it’s the only reliable source because the best technical indicators are all based on price action. When we look at raw price action we can tell who is winning the bulls and bears battle. The engulfing candle simply signals a big shift in the market sentiment. So, let’s see what the bullish engulfing pattern is telling us from the supply and demand perspective. The apparent shift in the supply-demand balance is revealed by the second candle, which shows that the buyers have stepped in and managed to overcome the sellers. However, as we know it, the price can move higher even from a lack of sellers (supply-side is dry out). That’s the reason why you’ll see that, many times, the candlestick patterns failing more often than not. The key idea here is that you need to be very selective and only trade the engulfing pattern when it develops at extreme ends of a trend. Truth to be told, the engulfing pattern rarely develops at the end of a trend. Most of the time, you’ll notice this chart pattern popping a lot of the time in the middle of the trend or in a sideways market where a lot of price manipulation happens. But, what if we can use the engulfing bar trading strategy to take advantage of the price manipulation?
Education
by Tradingstrategyguides
2
GBPUSD 4H TRIANGLE BREAKOUTTriangles are repeatable trading chart patterns. Triangles are consolidation chart patterns that can breakout either direction. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
by Tradingstrategyguides
1
NZDCHF 1D RANGE TRADINGRanges are repeatable trading chart patterns. Ranges are consolidation chart patterns that can breakout either direction. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
by Tradingstrategyguides
NATURAL GAS 1D BULL FLAG LONG TRADEBull Flags are a Range which are repeatable trading chart patterns. Bull Flags are a descending chart pattern which will have a directional bias (Long) depending on the previous incoming trend. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
MCX:NATURALGAS1!Long
by Tradingstrategyguides
WKHS 1H TRIANGLE BREAKOUTTriangleS are repeatable trading chart patterns. Triangles are consolidation chart patterns that can breakout either direction. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart ). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility ) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit. This trade post was provided by Ben Losier from TSG. Thanks Ben
NASDAQ:WKHS
by Tradingstrategyguides
1
1D SMITH WESSON TRENDLINE BREAKOUTTrend Line Trading: The Trend Breaker Strategy This trendline breakout trading strategy uses three indicators, which are the following: MACD- The inputs for this indicator are: Fast Length= 12 (represents the previous 12 bars of the faster moving average), Slow Length= 26 (Represents the previous 26 bars of the slower moving average), and Signal Smoothing= 9 ( represents the previous 9 bars of the difference between the two moving averages. This is plotted by vertical lines called a histogram). Simple Moving Average- The inputs for this indicator are: Length 8, Offset 0. (Red line) Exponential Moving Average-The inputs for this indicator are: Length 20, Offset 0. (Blue line) This Trend Breaker strategy also uses three different time frames. They are the 4 hour, the 1 hour, and 15 minute time frames. This top-down approach uses these time frames to identify a trend, find a breakout point, determine an entry point, and execute the trade. Step One to trend line trading: Identify a trend The first thing you need to do is identify an upward, downward, or sideways trend by switching to a 4-hour and 1 hour time frames. The reason both are used is that it will give you the best perspective in determining a trend according to this strategy. Draw a trend-line so that 3 points of resistance or support was touched. We created this trendline trading system so that you could easily enter trades without a lot of guesswork on your part. Here You can see a funny video about trading levels. Since this strategy focuses on trends, a trend line will be drawn on the support or resistance lines of the trend. The criteria for a trend is that there needs to be at least three points of resistance or support. As you can see on the 4- hour time frame this clearly is a downtrend. Below is the same chart only this is a 1-hour time frame. This is just to get another perspective of this downtrend. It is good to do this to completely confirm this trend by identifying 3 levels of resistance. Trading with trend lines is not easy, that is why it is important to have a clear system of step by step rules to make it easy for you to follow. Step Two: Identify a Breakout point Trendline Trading System In order to find a breakout point of the trend that was identified in step one, the strategy will use a combination of the three indicators (MACD, 15 minute SMA, EMA) to identify a break out on the 15-minute time frame. This time frame is used because a trend was already identified in step one on the 4 hours and 1 hour time frames. As you can see in the chart above on the 15-minute time frame, the MACD lines were crossed. When the crossover of the fast length and slow length occurs, this will signal a new trend. This gave an indication that a trend was breaking. The moving average and exponential moving average lines also crossed. So when the MACD lines cross and the simple moving average/ exponential lines cross wait until the candlesticks go above/below trend line that was drawn in step one, then identify a point of entry into the trade. One of the reasons we like trend line trading so much is that it is straight forward and simple and we recommend all traders have something simple. So looking at our example above the criteria was met to go to step three because the SMA and EMA crossed and the MACD lines crossed. Also, the trend went upwards and hit our trend line. This is a signal to go to step three. If neither of the indicators crosses before the candlesticks close and hit the trend line then do not go any further because the trade does not meet the criteria of the rules. The indicators need to show that the trend broke before it touched the trend line. Note* When our indicators are crossing, the trend needs to be heading toward the trend line that was drawn in step one. This is because the trend is breaking and a breakout is about to occur. When the breakout happens we will discuss when to make an entry. Step Three: Trend Line Trading Identify a point of entry Here is a list of the entry criteria: These 4 things must happen to enter a trade with this Trend Breaker Strategy. Simple Moving Average Must Cross below the Exponential moving average. Macd Must Cross The price must break below or above the trend line. After the break of the trendline, you must wait for 3 candles to close on the 15-minute chart before taking your entry. Now we need to identify a point of entry. To identify a point of entry always use the 15 minute time frame in this strategy. So in our example below, we see that there is an obvious stand-off between buyers and sellers on the trend line. Once there are at least three candlesticks above or below the trend line, you execute the trade. In this example, there are three candlesticks that fell above the trend line after our indicators signaled that the trend was broken. At this point, you want to make an entry. Also, read about Trader's Tech and Installing MT4 EAs with Indicators. Step four: How to Trade with Trend Lines: Determine where to place a stop loss. 1 Use Pong Position Icon on left side toolbar. Adjust Top Prifit line until center text says 1 to 3 risk reward. This will show you where SL should be placed. OR Place a stop loss past the last support and resistance levels in the trend itself. Again, use the 15 minute time frame to find this point of resistance/ support level. In the example shown below, place the stop loss below the last support level. This will ensure that if there was a bearish move, it will hit the last point of support and make a bullish move upwards. You can clearly see that there are two levels of support in the above example. Use the support levels to determine the stop loss. The rules were to place the stop loss below the last support level which is why you see the stop loss below these levels. Step five: Trendline Trading System Exit Strategy The plan clearly identified a trend, a breakout point, point of entry, and determined a stop loss. The final step is to determine the exit point. This Trend Breaker strategy uses 1 risk to 3 reward ratio. What that means is you have the potential to make 3 times more than you are risking. Use the Long Position Icon on the left side toolbar. Adjust top profit level until the center text says 1 to 3 risk reward. Conclusion This Trend Breaker Strategy is simple and yet effective. There is no need to stress and worry that you made the wrong trade. You follow the rules and do not let anything else make you back out of a trade. If it follows the rules, execute the trade with confidence. Always remember to only be risking no more than 2% of your account! This will help you identify daily trends and points where they break. There is no need to force yourself into a trade. If it does not follow your rules and guidelines then search for another pair to trade. Feel free to check out one of our other trading strategies.
NASDAQ:SWBIEducation
by Tradingstrategyguides
1
USDJPY 1D RANGE TRADINGRanges are repeatable trading chart patterns. Ranges are consolidation chart patterns that can breakout either direction. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
by Tradingstrategyguides
APPLE 1D ASCENDING TRIANGLE BREAKOUTAscending Triangles are repeatable trading chart patterns. Ascending chart patterns will have a directional bias depending on the previous incoming trend. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
NASDAQ:AAPLLong
by Tradingstrategyguides
GBPUSD 1D BEAR FLAG SHORT TRADEAscending Channel is a Range Pattern that is a repeatable trading chart patterns. Ascending channel chart pattern will have a directional bias (Short) depending on the previous incoming trend. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
Short
by Tradingstrategyguides
2
GBPAUD 1D DESCENDING TRIANGLEDescending Triangles are repeatable trading chart patterns. Descending chart patterns will have a directional bias depending on the previous incoming trend. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
Short
by Tradingstrategyguides
BTCUSD 1D ASCENDING TRIANGLEAscending Triangle are repeatable trading chart patterns. Ascending chart patterns will have a directional bias depending on the previous incoming trend. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
COINBASE:BTCUSDLong
by Tradingstrategyguides
6
LOCO 1D TRIANGLE BREAKOUT LONG Triangle are repeatable trading chart patterns. Triangles are consolidation chart patterns that can breakout either direction. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1) Stop-Loss = 1.5 X ATR 1st Target = 1 X ATR 2) 1/2 off at 1st Target for profit Move Stop-Loss to break-even on remainder and let profit run 3) If, after entry, the candle closes back inside the Triangle, Close for a loss 4) No TP on 2nd trade – letting profit run and adjusting SL to follow price.
NASDAQ:LOCOLong
by Tradingstrategyguides
QCOM 1D RANGE LONG TRADERanges are repeatable trading chart patterns. Ranges are consolidation chart patterns that can breakout either direction. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
NASDAQ:QCOMLong
by Tradingstrategyguides
GBPJPY 1D BEAR FLAG SHORT TRADEBear Flags are a range chart pattern. Bear Flag Ranges are repeatable trading chart patterns. Bear Flag chart patterns will have a directional bias (Short Trade) depending on the previous incoming trend. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
Short
by Tradingstrategyguides
AMD 1D RANGE TRADING BULLISH BREAKOUTRanges are repeatable trading chart patterns. Ranges are consolidation chart patterns that can breakout either direction. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
NASDAQ:AMDLong
by Tradingstrategyguides
SHOP 1D BULLISH FLAG LONG TRADEBull Flags are a Range type pattern. Bull Flag Ranges are repeatable trading chart patterns. Descending Bull Flag chart patterns will have a directional bias (Long Trade) depending on the previous incoming trend. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
NYSE:SHOPLong
by Tradingstrategyguides
GBPCHF 1D RANGE TRADINGRanges are repeatable trading chart patterns. Ranges are consolidation chart patterns that can breakout either direction. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
by Tradingstrategyguides
2