Get started

Centered Oscillators

Technical Ratings█  OVERVIEW This indicator calculates TradingView's well-known "Strong Buy", "Buy", "Neutral", "Sell" or "Strong Sell" states using the aggregate biases of 26 different technical indicators. █  FEATURES Differences with the built-in version  • You can adjust the weight of the Oscillators and MAs components of the rating here.  • The built-in version produces values matching the states displayed in the "Technicals" ratings gauge; this one does not always, where weighting is used.  • A strategy version is also available as a built-in; this script is an indicator—not a strategy.  • This indicator will show a slightly different vertical scale, as it does not use a fixed scale like the built-in.  • This version allows control over repainting of the signal when you do not use a higher timeframe. Higher timeframe (HTF) information from this version does not repaint.  • You can configure markers on signal breaches of configurable levels, or on advances declines of the signal. The indicator's settings allow you to:  • Choose the timeframe you want calculations to be made on.  • When not using a HTF, you can select a repainting or non-repainting signal.  • When using both MAs and Oscillators groups to calculate the rating, you can vary the weight of each group in the calculation. The default is 50/50.   Because the MAs group uses longer periods for some of its components, its value is not as jumpy as the Oscillators value.   Increasing the weight of the MAs group will thus have a calming effect on the signal.  • Alerts can be created on the indicator using the conditions configured to control the display of markers. Display The calculated rating is displayed as columns, but you can change the style in the inputs. The color of the signal can be one of three colors: bull, bear, or neutral. You can choose from a few presets, or check one and edit its color. The color is determined from the rating's value. Between 0.1 and -0.1 it is in the neutral color. Above/below 0.1/-0.1 it will appear in the bull/bear color. The intensity of the bull/bear color is determined by cumulative advances/declines in the rating. It is capped to 5, so there are five intensities for each of the bull/bear colors. The "Strong Buy", "Buy", "Neutral", "Sell" or "Strong Sell" state of the last calculated value is displayed to the right of the last bar for each of the three groups: All, MAs and Oscillators. The first value always reflects your selection in the "Rating uses" field and is the one used to display the signal. A "Strong Buy" or "Strong Sell" state appears when the signal is above/below the 0.5/-0.5 level. A "Buy" or "Sell" state appears when the signal is above/below the 0.1/-0.1 level. The "Neutral" state appears when the signal is between 0.1 and -0.1 inclusively. Five levels are always displayed: 0.5 and 0.1 in the bull color, zero in the neutral color, and -0.1 and - 0.5 in the bull color. The levels that can be used to determine the breaches displaying long/short markers will only be visible when their respective long/short markers are turned on in the "Direction" input. The levels appear as a bright dotted line in bull/bear colors. You can control both levels separately through the "Longs Level" and "Shorts Level" inputs. If you specify a higher timeframe that is not greater than the chart's timeframe, an error message will appear and the indicator's background will turn red, as it doesn't make sense to use a lower timeframe than the chart's. Markers Markers are small triangles that appear at the bottom and top of the indicator's pane. The marker settings define the conditions that will trigger an alert when you configure an alert on the indicator. You can:  • Choose if you want long, short or both long and short markers.  • Determine the signal level and/or the number of cumulative advances/declines in the signal which must be reached for either a long or short marker to appear.   Reminder: the number of advances/declines is also what controls the brightness of the plotted signal.  • Decide if you want to restrict markers to ones that alternate between longs and shorts, if you are displaying both directions.   This helps to minimize the number of markers, e.g., only the first long marker will be displayed, and then no more long markers will appear until a short comes in, then a long, etc. Alerts When you create an alert from this indicator, that alert will trigger whenever your marker conditions are confirmed. Before creating your alert, configure the makers so they reflect the conditions you want your alert to trigger on. The script uses the alert() function, which entails that you select the "Any alert() function call" condition from the "Create Alert" dialog box when creating alerts on the script. The alert messages can be configured in the inputs. You can safely disregard the warning popup that appears when you create alerts from this script. Alerts will not repaint. Markers will appear, and thus alerts will trigger, at the opening of the bar following the confirmation of the marker condition. Markers will never disappear from the bar once they appear. Repainting This indicator uses a two-pronged approach to control repainting. The repainting of the displayed signal is controlled through the "Repainting" field in the script's inputs. This only applies when you have "Same as chart" selected in the "Timeframe" field, as higher timeframe data never repaints. Regardless of that setting, markers and thus alerts never repaint. When using the chart's timeframe, choosing a non-repainting signal makes the signal one  bar late, so that it only displays a value once the bar it was calculated has elapsed. When using a higher timeframe, new values are only displayed once the higher timeframe completes. Because the markers never repaint, their logic adapts to the repainting setting used for the signal. When the signal repaints, markers will only appear at the close of a realtime bar. When the signal does not repaint (or if you use a higher timeframe), alerts will appear at the beginning of the realtime bar, since they are calculated on values that already do not repaint. █  CALCULATIONS The indicator calculates the aggregate value of two groups of indicators: moving averages and oscillators. The "MAs" group is comprised of 15 different components:  • Six Simple Moving Averages of periods 10, 20, 30, 50, 100 and 200  • Six Exponential Moving Averages of the same periods  • A Hull Moving Average of period 9  • A Volume-weighed Moving Average of period 20  • Ichimoku‎ The "Oscillators" group includes 11 components:  • RSI  • Stochastic  • CCI  • ADX  • Awesome Oscillator  • Momentum  • MACD  • Stochastic RSI  • Wiliams %R  • Bull Bear Power  • Ultimate Oscillator The state of each group's components is evaluated to a +1/0/-1 value corresponding to its bull/neutral/bear bias. The resulting value for each of the two groups are then averaged to produce the overall value for the indicator, which oscillates between +1 and -1. The complete conditions used in the calculations are documented in the Help Center . █  NOTES Accuracy When comparing values to the other versions of the Rating, make sure you are comparing similar timeframes, as the "Technicals" gauge in the chart's right pane, for example, uses a 1D timeframe by default. For coders We use a handy characteristic of array.avg() which, contrary to avg() , does not return na when one  of the averaged values is na . It will average only the array elements which are not na . This is useful in the context where the functions used to calculate the bull/neutral/bear bias for each component used in the rating include special checks to return na whenever the dataset does not yet contain enough data to provide reliable values. This way, components gradually kick in the calculations as the script calculates on more and more historical data. We also use the new `group` and `tooltip` parameters to input() , as well as dynamic color generation of different transparencies from the bull/bear/neutral colors selected by the user. Our script was written using the PineCoders Coding Conventions for Pine . The description was formatted using the techniques explained in the How We Write and Format Script Descriptions PineCoders publication. Bits and pieces were lifted from the PineCoders' MTF Selection Framework . Look first. Then leap.
Editors' picks
Pine Script™ indicator
by TradingView
47
Hopper Trigger - Free Cryptohopper WidgetWelcome to our Tradingview cryptohopper trigger widget. We designed this script to give Cryptohopper users the possibility to set up an alarm when btc is trending down. Cause of the BTCs behavior as the supertrend coin for the market it is better to turn your hopper off or be extremly careful when BTC is trending down. We implemented to types of alarms, because atm its not possible to automate using them to deactivate your hopper. On Alarm setup could be used to send signals every minute to trigger a push notification on your App or to trigger your Alexa. The other type of alarm only sends one single signal for normal purposes. We recommend using this indicator in the 30 minute or 1 hour timeframe and to deactivate your hopper and deleting all positions when a alarm is signaling. The risk of a larger drop is very high in this marketphase. Never take an drop again using this approach. Little drawdown in bearish or ranging times but high reward in bullish times. Smartgrow-Trading is a community project with the aim of developing the best and most successful trading strategies and sharing them with the community. The basic idea of this script is to calculate how far an coin is away from its ATH , to gave warning signals for deactivating coins after they reached there ATH . So it could also be used for other coins and pairs. If there are questions, write them into the comments or contact us directly over the direct message or social media. Happy Trading!
Pine Script™ indicator
by Smartgrow-Trading
2
[blackcat] L1 Ehlers FM DemodulatorLevel: 1 Background John F. Ehlers introuced FM demodulator of "A Technical Description Of Market Data For Traders" on TASC MAY 2021 Function John Ehlers introduces the use of FM modulation to determine the cycles of market data. The author also proposes that noise in market data does not necessarily mean chaos and that pink noise in the data implies memory in the data. According to the author, peaks and valleys of the FM demodulator indicator that he presents in the article can be correlated with major swings of the price. The FM demodulator indicator (FMD) ranges from -1.0 to 1.0. There is a natural delay in the detection of peaks and troughs, as we need to wait while the indicator has moved by a certain amount. The example system buys as soon as a new higher trough has been confirmed. Key Signal SS --> FM Demodulator ouput Pros and Cons 100% John F. Ehlers definition translation, even variable names are the same. This help readers who would like to use pine to read his book. Remarks The 103rd script for Blackcat1402 John F. Ehlers Week publication. Readme In real life, I am a prolific inventor. I have successfully applied for more than 60 international and regional patents in the past 12 years. But in the past two years or so, I have tried to transfer my creativity to the development of trading strategies. Tradingview is the ideal platform for me. I am selecting and contributing some of the hundreds of scripts to publish in Tradingview community. Welcome everyone to interact with me to discuss these interesting pine scripts. The scripts posted are categorized into 5 levels according to my efforts or manhours put into these works. Level 1 : interesting script snippets or distinctive improvement from classic indicators or strategy. Level 1 scripts can usually appear in more complex indicators as a function module or element. Level 2 : composite indicator/strategy. By selecting or combining several independent or dependent functions or sub indicators in proper way, the composite script exhibits a resonance phenomenon which can filter out noise or fake trading signal to enhance trading confidence level. Level 3 : comprehensive indicator/strategy. They are simple trading systems based on my strategies. They are commonly containing several or all of entry signal, close signal, stop loss, take profit, re-entry, risk management, and position sizing techniques. Even some interesting fundamental and mass psychological aspects are incorporated. Level 4 : script snippets or functions that do not disclose source code. Interesting element that can reveal market laws and work as raw material for indicators and strategies. If you find Level 1~2 scripts are helpful, Level 4 is a private version that took me far more efforts to develop. Level 5 : indicator/strategy that do not disclose source code. private version of Level 3 script with my accumulated script processing skills or a large number of custom functions. I had a private function library built in past two years. Level 5 scripts use many of them to achieve private trading strategy.
Pine Script™ indicator
by blackcat1402
3
Fiveral: Repulsion/Golden Radio HackAnother in a series of experimental indicators using logarithmic scale visualisation. This one extends into some work on I've been doing on 'the cube', but Pine isn't liking multiple log lines even when the equations are included for each plotted variable, meaning, no variables used in the definition of a variable, as is done here. As a result, accuracy of this indicator can't be guaranteed between scales, or during use. Have at it, and enjoy!
Pine Script™ indicator
by latticephreak
2
MTF CCI using EMAsThis is a CCI script adapted from 'CCI w EMA by Rick3712' which removes the EMA of the CCI and adds different sized CCI results to the same plot. An info box is also added for easy reference of current values. CCI is a useful way to see the price's relation to moving averages in a different way, and being able to see the trend strength over time using the larger CCI allows a trader to make better informed decisions when reaching oversold or overbought conditions in relation to the shorter EMAs, such as the 20. You can also see patterns in a trend's strength easier by comparing the movements and levels to find likely areas of a pullback or buying opportunity. In the example you can see a common level in ETH's parabolic movement on the 4h 750 EMA and 200 EMA that indicates a likely correction area.
Pine Script™ indicator
by SevenHigh
Color Gradient Framework [PineCoders]█  OVERVIEW This indicator shows how you can use the new color functions in Pine to generate color gradients. We provide functions that will help Pine coders generate gradients for multiple use cases using base colors for bull and bear states. █  CONCEPTS For coders interested in maximizing the use of color in their scripts, TradingView has added new color functions and new functionality to existing functions. For us coders, this translates in the ability to generate colors on the fly and use dynamic colors ("series color") in more places. New functions allow us to:  • Generate colors dynamically from calculated RGBA components ("A" is the Alpha channel, known to Pine coders as the "transparency"). See color.rgb() .  • Extract RGBA components from existing colors. See color.r() , color.g() , color.b() and color.t() .  • Generate linear gradients between two colors. See color.from_gradient() . Improvements to existing color/plotting functions allow more flexible use of color:  • plotcandle() now accepts a "series color" argument for its `wickcolor` and `bordercolor` parameters.  • plotarrow() now accepts a "series color" argument for its `colorup` and `colordown` parameters. Gradients are not only useful to make script visuals prettier; they can be used to pack more information in your displays. Our gradient #4 goes overboard with the concept by using a different gradient for the source line, its fill, and the background. █  OUR SCRIPT The script presents four functions to generate gradients: f_c_gradientRelative(_source, _min, _max, _c_bear, _c_bull) f_c_gradientRelativePro(_source, _min, _max, _c_bearWeak, _c_bearStrong, _c_bullWeak, _c_bullStrong) f_c_gradientAdvDec(_source, _center, _c_bear, _c_bull) f_c_gradientAdvDecPro(_source, _center, _steps, _c_bearWeak, _c_bearStrong, _c_bullWeak, _c_bullStrong) The relative gradient functions are useful to generate gradients on a source that oscillates between known upper/lower limits. They use the relative position of the source between the `_min` and `_max` levels to generate the color. A centerline is derived from the `_min` and `_max` levels. The source's position above/below that centerline determines if the bull/bear color is used, and the relative position of the source between the centerline and the max/min level determines the gradient of the bull/bear color. The advance/decline gradient functions are useful to generate gradients on a source for which min/max levels are unknown. These functions use source advances and declines to determine a gradient level. The `f_c_gradientAdvDec()` version uses the historical maximum of advances/declines to determine how many correspond to the strongest bull/bear colors, making its gradients adaptive. The `f_c_gradientAdvDecPro()` version requires the explicit number of advances/declines that correspond to the strongest bull/bear colors. This is useful when coloring chart bars, for example, where too many gradient levels are difficult to distinguish. Using the Pro version of the function allows you to limit the number of gradient levels to 5, for example, so that transitions are fewer, but more obvious. The `_center` parameter of the advance/decline functions allows them to determine which of the bull/bear colors to use. Note that the custom `f_colorNew(_color, _transp)` function we use in our script should soon no longer be necessary, as changes are under way to allow color.new() to accept series arguments. Inputs The script's inputs demonstrate one way you can allow users to choose base bull/bear colors. Because users can modify any of the colors, only two are technically needed: one for bull, one for bear, as we do for the configuration of the bull/bear colors for the background in the gradient #4 configuration. Providing a few presets from which users can choose can be useful for color-challenged script users, but that type of inputs has the disadvantage of not rendering optimally in all OS/Browser environments. You can use the inputs to select one of eight gradient demonstrations to display. █  THANKS Thanks to the PineCoders team for validating the code and description of this publication. Thanks also to the many TradingView devs from multiple teams who made these improvements to Pine colors possible. Look first. Then leap.
Editors' picks
Pine Script™ indicator
by PineCoders
38
{Gunzo} Bulls Power vs. Bears PowerBulls Power vs. Bears Power is a unique tool that displays on each candle the balance between the bears (sellers) and the bulls (buyers). OVERWIEW : This indicator is mainly based on the popular indicator “Elder ray” made by Dr. Alexander Elder in 1989. This indicator has been developed in order to determine the strength of the competing groups of buyers and sellers in the markets. CALCULATION : To measure the competing power of bulls and bears, the indicator compares the current high (maximum power of the bulls) and current low (maximum power of the bears) to the average price using a exponential moving average. Bull Power = Current High – EMA 13 (closing) Bear Power = Current Low – EMA 13 (closing) This Elder ray indicator can also tell us more information about market conditions : If the current high and current low are above the EMA 13, the bulls are totally in control on the market If the current high and current low are under the EMA 13, the bears are totally in control of the market If the EMA 13 is in between of the current high and current low, there is strong fight about controlling the market, there is possible reversal in this configuration SETTINGS : Fast MA Period : Fast moving average period (only used for buy sell signal) Slow MA Period : Slow moving average period (only used for buy sell signal) Display candle labels : Show/hide candle labels on the chart Display only bear labels above X : Exclude all top candle labels on the chart below the value specified. Display only bull labels above X : Exclude all bottom candle labels on the chart below the value specified. Display opposite values : Show all candle labels on top (bearish) and bottom (bullish) or only show the candle labels for the winning force on the candle. Display box for last candle : Show/hide the dominance boxes (red and blue) after last candle showing the last bear and bull power. Display box after X candles : How many candles in the future the dominance boxes should be displayed. Display slow / fast crossover (o) : Display crossover signals (circles) between fast line and slow line. Display bear / bull fighting (x) : Display fighting signals (crosses) between bull and bears. VISUALIZATIONS : This indicator has 3 possible complementary visualizations: Candle labels : The labels on top are the percentage of the bears on the candle, while the labels on the bottom are the percentage of the bulls on the candle. When the bulls are winning the labels are blue, when the bears are winning the labels are red, silver otherwise. Box after last candle : The blue and red boxes after the last candle are the percentage of bears and bulls on the last candle of the chart. That boxes can be disabled in the settings if you feel it is redundant with the labels. Signals : The signals are displayed at the bottom of the main area of trading. The orange “x” represents an area where bulls and bears are fighting hard. The blue “o” represents a buy signal (fast line crosses over the slow line) and the red “o” represents a sell sinal (fast line crosses under the slow line). USAGE : The most important rule in the usage of this indicator is : “The higher the current bull power is (or bear power), the higher the chances are the next candle will also be bullish (or bearish).” When the prices is increasing, it is very interesting to follow the bull power to verify that it is either stable or increasing. If the bull power keeps decreasing candle after candle, there is chances that in the next candles there will be a reversal. When there is orange crosses in the signal area (bottom of the screen), it means that there is a big fight between bulls and bears and that the current price of the asset is probably stable. During these fighting areas, reversals are more likely to happen. When there is a blue circle in the signal area (or red signal), it can be considered as a buy signal (or sell signal). These signals are determined by the crossover of the fast and slow lines of the total power of the bulls plus the bears. LIMITATIONS : As Pine script only allows to display about 50 drawings on the chart, the labels on the candles can not be printed on all the historical candles. The option “Display opposites” could be useful to hide unnecessary labels and then be able to display more older labels. As the Elder ray indicator uses an average price (EMA 13 of closing price), the indicator may be lagging in some situations, but most of the time it will help to filter the bad signals contrary to the indicators that are too reactive.
Pine Script™ indicator
by Gunzo_TV
44
Price Acceleration Convergence Divergence V2This is a fork of the previous PACD indicator i made by working out the RSI another two times. it works the exact same but is more leading in trend reversals and divergences. this indicator plots 4x the RSI of the RSI of the price using the derivatives of RSI. Data is plotted just like the MACD. points 5 and -5 are very strong support/resistance points and should be very important points to take note of. use this indicator like the MACD essentially with the assistance of a 4x RSI momentum. enjoy
Pine Script™ indicator
by dardygook