MG - Multiple time frame pivot alert - 1.0Indicator currently allows pivots from two time frames (ideally a trading time frame and a higher time frame) to be specified.
In the example, the 1H time frame is being used for entries using the 4H time frame (8 candles pivot width = 2 4H candles) as the trading time frame and the daily chart (48 candles pivot width = 2 daily candles) as the higher time frame.
This allows one to visually higher time frame Fibonacci swings and allows them to accurately perform Fibonacci analysis without having to switch to a higher time frame
Fibonacci
FibLinesThis script automatically draws Fibonacci Lines on chart.
0% line and 100% line are determined by "Period" parameter.
Daily Auto Fibonacci ToolCalculates Fibonacci retracements based on daily highs/lows, and further beyond that if specified. The main difference between this and other auto Fibbing tools is ease of visibility.
Options:
Take highs/lows from a few days back or take highs/lows from each daily candle
Hide retracements before today
Show labels for each retracement level
Hide/Show retracement levels
Change colors quickly and uniformly (in script)
Retracements used:
-0.382 / 0 / 0.236 / 0.382 / 0.5 / 0.618 / 0.786 / 1 / 1.272
Fibonacci Auto ModeThis script is an attempt to display Fibonacci Levels in Auto Mode.
It allows for:
Select Higher Time Frame (HTF)
Indicate How Many Bars from HTF to Use to Find Highs/Lows
Manual Mode: Overrides HTF selections
Number of Bars Back to use in Manual Mode
Show/Hide each one of the Levels
Highlight RLZ
MG - Fibonacci Alerts - 1.2Updated version of:
The main change with this version, is that the indicator is now always overlayed and the user has to specify where they want the alerts to be displayed on the chart. (New 'Alert Base' and 'Alert Amplitude' properties define where this is shown in the chart and how large the alert spikes are). It also now includes optional bull and sell markers
This update therefore allows us to:
- Show the Fibonacci Levels being used by the indicator
- Plot buy and sell signals at the correct points on the price chart
- Trigger alerts when price reaches a Fibonacci level (without displaying this on the chart, the indicator can't be overlayed on the main chart)
MG - Fibonacci Alerts - 1.1Updated version of
Allows users to receive alerts when price reach a new Fibonacci level.
By default, the Fibonacci levels extend upwards. This can be changed to extend downwards by unchecking 'Extend Upwards' option.
Usage:
- Perform a Fib extension analysis and determine a high value, low value and direction of extension
- Add indicator and specify these values
- Optionally, to view the levels used by the indicator on the main chart, copy the indicator source and:
- Set overlayed = true
- Set highPrice and lowPrice to your determined values (optional, but will save re-entering them later)
- Add to chart
- This will show you the exact levels used by the indicator
- Set overlayed = false
- Remove and re-add the indicator
MG - Fibonacci Alerts - 1.0This script allows a user to get alerts when the price goes within a certain percentage threshold of a Fibonacci level.
If connected with AutoView, it could allow an easy way to do automated range trading between Fibonacci levels. Although I plan to do this myself, I haven't used it for this purpose yet so please be cautious and verify with live results beforehand before using it for any automation.
NOTE: The image shown of the indicator is not fully correct as the close price is used. In many cases in the example image, the candle close price DID come within the alert threshold but closed outside the threshold
Usage:
1. User performs a Fibonacci retracement / extension analysis to identify a sensible high and low point. (Currently, this script is geared towards dip pullbacks during a bull market with the ability to toggle rise pullbacks in a bear market in the pipeline)
2. User enters the high and low points into this indicator
3. User can then set alerts on the buy and sell signals which should provide alerts at excellent entry / exit points.
a. Alerts must be created on the buy and sell signal bars. E.g. Buy signal => Alert when 'Buy Signal' crosses up '0.9'
4. Set the alerts to once per bar (not per close). In this indicator, we want to catch things as soon as they happen.
NOTE: Should use in conjunction with another indicator for maximize results.
I personally use this indicator ()
TODO
- Add negative alert levels
- Allow user to specify direction of Fib retracement as the levels are different in bull and bear markets
All feedback is welcome
2 hours ago
MG - Fibonacci Level AlertsThis script allows a user to get alerts when the price goes within a certain percentage threshold of a Fibonacci level.
If connected with AutoView, it could allow an easy way to do automated range trading between Fibonacci levels. Although I plan to do this myself, I haven't used it for this purpose yet so please be cautious and verify with live results beforehand before using it for any automation.
NOTE: The image shown of the indicator is not fully correct as the close price is used. In many cases in the example image, the candle close price DID come within the alert threshold but closed outside the threshold
Usage:
1. User performs a Fibonacci retracement / extension analysis to identify a sensible high and low point. (Currently, this script is geared towards dip pullbacks during a bull market with the ability to toggle rise pullbacks in a bear market in the pipeline)
2. User enters the high and low points into this indicator
3. User can then set alerts on the buy and sell signals which should provide alerts at excellent entry / exit points.
4. Set the alerts to once per bar (not per close). In this indicator, we want to catch things as soon as they happen.
NOTE: Should use in conjunction with another indicator for maximum results.
I personally use this indicator ()
TODO
- Add negative alert levels
- Allow user to specify direction of Fib retracement as the levels are different in bull and bear markets
All feedback is welcome
Automatic Support, Resistance, Fibonacci LevelsThis indicator plots absolute high and low values for up to five completely adjustable time periods (in months, weeks, days, hours, minutes) and optionally calculates the Fibonacci levels on the pair of absolutes of your choice, ascending or descending, and mimics the shading available in the built-in Fib charting tools (e.g. retracement).
Here are a few screenshots of the same chart with various options selected.
3-Month, 4-Week, and 5-Day absolutes with 3-Monthly Fib plotted:
The same chart with 4-Weekly Fib:
The same chart with 5-Daily Fib:
5-Day, 12-Hour, 90-Minute absolutes with 12-Hourly Fib:
Zoomed in, on a 30-minute interval, with 90-minute Fib:
With descending ("inverted") 90-minute Fib:
I started putting this together for Vazzyb, who was looking for a way to automate plotting horizontal support and resistance levels for monthly, weekly, and daily extremes, and then I added additional features as they occurred to me. Special thanks to Paaax, who suggested I add Fib levels.
I am leaving the code open, so you may feel free to grab snippets you like and use them for your own purposes. Of particular interest may be my custom "calc_fib()" function, which accepts any series pair, as well as a Boolean indicating whether to invert, and returns an array with each of the major Fibonacci levels: .
If anyone likes this enough to feel generous, please feel free:
BTC
3KmFchJ18QvMzAJKDcFQXvyK9p1EHWQdhP
BCH
qqtrw64ptuwprk5vtj3z8qwkvh3v0jawxq7khqng7x
ETH
0x9b51361A278910Ba3945C7519C9f0FA8a77df18d
LTC
MDeWWsP7XCG2zQuZ2dYALZXQ52u2qkc8fh
P.S. If you want the time lengths to be as close to accurate as possible, don't forget to change the number of days per week when using for cryptocurrency!
TECHIE/Philakone Fibonachi 8, 13, 55 & 200 EMAThis is a 3(+1) in one EMA using the Fibonachi levels of 8, 13, 55 & 200.
Insipred by Philakone - www.youtube.com
Donchian Fibonacci Trading ToolDONCHIAN FIBONACCI TRADING TOOL
This indicator is based on a Donchian Channel with Fibonacci zones I published before. Features are added which enable trading decisions, it suggests when to open either a long or a short position, it provides suggestions for a stop loss level and suggests a take profit level, the calculation of the take profit suggestion can be altered in the inputs. The user should devise a trading strategy on his own, several strategies are possible, but as a Donchian Channel is used, these must come down to refinements in the classical Turtle Trading system.
NO LAGGING
Donchian Channels have no lagging, this tool being based on these, has none as well. The only added feature with a little lagging is the Hull MA, all other features work at once and report right now the historical context of the present bar or candle even while it is developping.
ANY TIME FRAME
This indicator works in any time frame. However, when the user sets the prediction calculation to percent, then in small intraday time frames the result will be relatively huge.
FALSE SIGNALS
Fibonacci retracement levels are based on inclinations which exist in nature and which also exist in the financial markets. The expectations, labeled ‘DFT: expect’, based on these levels, are usually correct. The take profit levels otoh, labeled ‘DFT: predict’, are usually incorrect. The trader should take care and needs proper ‘gut feeling’ in using these
FEATURES TRIGGERED BY THE MARKET ENTERING OR LEAVING ZONES
1. REACTIVE COLORS
The zone in which the close is, is brighter coloured.
2. ENTRY AND EXIT MARKERS NEAR UP- OR DOWN TREND ZONES
If the close enters the Up Trend or Down Trend zone, coming from another zone, a triangle is placed just outside the channel border. If it leaves the zone, an X cross is placed.
3. MARKET SITUATION EXPECTATION LEVELS (OFFSET)
The indicator can report four market situations which may be valid for the last candle:
3.1. Market is in up trend: a blue dot is placed in an offset (=future) position of the High Border,
expect levels are placed offset of High Border and the Highest Fibonacci line,
3.2. Market is in down trend: a red dot is placed offset the Low Border, also expect levels offset the Low Border and the Lowest Fibonacci line.
3.3. Market is high ranging, i.e. last break out was at High Border and market is not in up- or down trend. A green dot is placed offset the Center High Fibonacci line and expect levels offset the Highest and Center Low Fibonacci lines.
3.4. Market is low ranging, i.e. last break out was at Low Border and market is not in up- or down trend. A brown dot is placed offset the Center Low Fibonacci line and expect levels offset the Center High and Lowest Fibonacci lines.
FEATURES TRIGGERED BY AN ATTEMPT TO BREAK OUT OF THE CHANNEL BORDERS
4. SWING LINE
When the High Border is touched, the Swing Line changes its level to the Highest Fibonacci line and changes its color to blue. When the Low Border is touched, the Swing Line changes its level to the Lowest Fibonacci line and changes its color to red. This way you can see whether the general trend is up- or down and also if and when the line has been crossed.
5. DIAMOND MARKERS (OFFSET)
These markers flash when the last bar or candle or the one before that, touches a channel border, the offset is equal to the expect levels.
6. PREDICTION LEVEL (OFFSET)
The prediction level flashes in the same situation as the diamond marker. The default level is 1 Average True Range. Most are in fact false signals. One can switch the prediction level off by setting the added amount to 0, then only the Diamond Markers will flash
OTHER FEATURES
7. HULL MOVING AVERAGE
Its direction provides an indication of the price dynamics.
8. SUPPRESSION OF PLOTTING SOME LAST VALUES
Quite a few lines stop before the last bar or candle. This way the last candle seem free loating and the chart reports only the values the user needs.
Enjoy, Eykpunter.
Fibonacci ZoneMy first attempt in Pine.
It is a Donchian Channel, but in stead of the median line I added the four Fibonacci lines and colored three of the five ensuing zones in suggestive colors.
The blue zone is up trend zone
The gray zone is ranging zone
The orange zone is down trend zone.
The white zones are 'in betweens'
For the fibs to function properly it needs to be a 20 - 30 period channel.
AutoFibLevels - FixedPersonally I don't like the trouble of drawing fibonacci retracement and extension tolls time and time again, not only human eyes and hands are not as accurate as a computer, but also, you would sit and think : "Hey, which one of these candles is the start of the wave" time and time again.
That is one of the issues, some times you may want to drop more than one fibo on the chart to see where they over lap and that, makes your chart hell to look into.
This script will draw fibonacci levels for you based on the time frame you are in, for each time frame the number of bars that it will look into differs and if you need to, you can adjust them per time frame separately.
And as always for indicators, you have total control on which lines to draw and clouds, and their color and transparency.
The reason this title has Fix, is that I totally forgot to change some titles in the script so in the style you would see some errors in titles and also, the 1.618 line had a wrong title, sorry and thanks
AutoFibLevelsPersonally I don't like the trouble of drawing fibonacci retracement and extension tolls time and time again, not only human eyes and hands are not as accurate as a computer, but also, you would sit and think : "Hey, which one of these candles is the start of the wave" time and time again.
That is one of the issues, some times you may want to drop more than one fibo on the chart to see where they over lap and that, makes your chart hell to look into.
This script will draw fibonacci levels for you based on the time frame you are in, for each time frame the number of bars that it will look into differs and if you need to, you can adjust them per time frame separately.
And as always for indicators, you have total control on which lines to draw and clouds, and their color and transparency.
autofibmodifiedThis is a slight modification,
The setting as it is marks the high and the low for the day, but can be adjusted to be a fib extension if you like.
You can just copy this script replacing the old one to add in the extra two lines.
autofiba very simple script to place 3 Fib lines on the currents days action from the regular hours automatically
Prime Fib AvgsHey all,
Just thought some might find it useful to have a script of the first 7 numbers that are both fibonacci and that are prime numbers as simple moving averages and as exponential averages.
If anyone wants any other average type added to this script I can put out another version
Happy trading,
Snoop
Fibonacci BandsCreates bands based on Fibonacci numbers and the SMA.
Based on indicator by Big Mike on futures.io
How to trade
- Best to use in ranging market conditions
- Place on two different time frames eg. 15 and 55 min.
- Take trades off either short or long term chart.
- Best trades occur when both charts show same trigger/condition.
- Trades are short term reversals in direction of major trend on longer term chart unless you expect a trend reversal.
- Determine which band is the limiting band for the volatility of the instrument.
- When the market closes outside of the limiting band then returns inside, take a long/short one tick above/below the high/low of the previous bar.
- Place stop below/above the low/high of the the recent swing low/high.
- Set targets at opposite band of chart
PD Fibonacci RetraceThe original script was posted on ProRealCode by user lolo.
This indicates the previous days High, Low and the Fibonacci retracement for the previous day.
B3 Fibonacci Pivot S/RFor my second share, I give you some levels I look at everyday for the ES minis. HLC/3 of the MTF (multi-time-frame) inputs = mean and Fib-levels formed as support and resistance zones. There are some websites that will show you 20 ways to figure out a pivot for the day's intraday workings, and this one always rang true for me. I keep it set at Res=D and Len=3or5 and use on hourly charts. This indicator is capable of doing like a Res=60m Len=8 for a 5m chart or something of that nature if you wish to test it out.
I haven't tested it out for tick charts and I have noticed that this is good on index and commodity futures, and not so much other things.
Uncanny to me how well this works as reversal awareness for ES. Doesn't mean that one will happen, or if it does that it will have trade-able juice, though it is very important awareness never-the-less.
screencast.com
Automatic Daily Fibonacci v0.3 by JustUncleLThis update is a correction on the way the Fib Zero line is calculated. Previously it was just based on the source of the previous day, which is Ok as long as the Fiblength was set to 2. The new version calculates the Fib Zero from the average of the specified source over the Fiblength, so if Fiblength is now something other than 2 the Fibonacci Zero and other support and resistant levels should calculate correctly.
Fibonacci Bollinger BandsThese Bollinger bands feature Fibonacci retracements to very clearly show areas of support and resistance. The basis is calculate off of the Volume Weighted Moving Average. The Bands are 3 standard deviations away from the mean. 99.73% of observations should be in this range.
Bollinger Bands Fibonacci ratiosThe Fibonacci Bollinger Bands indicator is based on the same principles as the standard Bollinger Bands indicator developed by John Bollinger. The Fibonacci Bollinger Bands indicator bases its upper and lower bands on volatility just like the Bollinger Bands indicator does, but instead of using standard deviation as the measure of volatility, a Wilders Smoothed ATR is used in its place.
The middle band is a moving average used to establish the intermediate-term trend. The 3 upper bands are constructed by using the Wilders Smoothed ATR and multiplying it by each of the Fibonacci factors (1.618, 2.618, and 4.236) and then adding the results to the middle band. The 3 lower bands are constructed in the same manner as the upper bands except their results are subtracted from the middle band.
