Get started

Fundamental Analysis

Chiki-Poki BFXLS Longs Shorts Abs Normalized Volume Pro by RRBChiki-Poki BFXLS Longs vs Shorts Absolute Normalized Volume Value Pro by RagingRocketBull 2018 Version 1.0 This indicator displays Longs vs Shorts in a side by side graph, shows volume's absolute price value and normalized volume of Longs/Shorts for the current asset. This allows for more accurate L/S comparisons (like a log scale for volume) since volume on spot exchanges (Bitstamp, Bitfinex, Coinbase etc) is measured in coins traded, not USD traded. Similarly, L/S is usually the amount of coins in open L/S positions, not their total USD value. On Bitmex and other futures exchanges volume is measured in USD traded, so you don't need to apply the Volume Absolute Price Value checkbox to compare L/S. You should always check first whether your source is measured in coins or USD. Chiki-Poki BFXLS primarily uses *SHORTS/LONGS feeds from Bitfinex for the current crypto asset, but you can specify custom L/S source tickers instead. This 2-in-1 works both in the Main Chart and in the indicator pane below. You can switch between Main/Sub Window panes using RMB on the indicator's name and selecting Move To/Pane Above/Below. This indicator doesn't use volume of the current asset. It uses L/S ticker's OHLC as a source for SHORTS/LONGS volumes instead. Essentially L/S => L/S Volume == L/S Features: - Display Longs vs Shorts side by side graph for the current crypto asset, i.e. for BTCUSD - BTCUSDLONGS/BTCUSDSHORTS, for ETHUSD - ETHUSDLONGS/ETHUSDSHORTS etc. - Use custom OHLC ticker sources for Longs/Shorts from different exchanges/crypto assets with/without exchange prefix. - Plot Longs/Shorts as lines or candles - Show/Hide L/S, Diff, MAs, ATH/ATL - Use Longs/Shorts Volume Absolute Price Value (Price * L/S Volume) instead of Coins Traded in open L/S positions to compare total L/S value/capitalization - Normalize L/S Volume using Price / Price MA / L/S Volume MA - Supports any existing type of MA: SMA, EMA, WMA, HMA etc - Volume Absolute Price Value / Normalize also works on candles - Oscillator mode with negative axis (works in both Main Chart/Subwindow panes). - Highlight L/S Volume spikes above L/S MAs in both lines/oscillator. - Change L/S MA color based on a number of last rising/falling L/S bars, colorize candles - Display L/S volume as 1000s, mlns, or blns using alpha multiplier 1. based on BFXLS Longs vs Shorts and Compare Style, uses plot*, security and custom hma functions 2. swma has a fixed length = 4, alma and linreg have additional offset and smoothing params Notes: - Make sure that Left Price Scale shows up with Auto Fit Data enabled. You can reattach indicator to a different scale in Style. - It is not recommended to switch modes multiple times due to TradingView's scale reattachment bugs. You should switch between Main Chart and Sub Window only once. - When the USD price of an asset is lower you can trade more coins but capitalization value won't be as significant as when there are less coins for a higher price. Same goes for Shorts/Longs. Current ATH in shorts doesn't trigger a squeeze because its total value is now far less than before and we are in a bear market where it's normal to have a higher number of shorts. - You should always subtract Hedged L/S from L/S because hedged positions are temporary - used to preserve the value of the main position in the opposite direction and should be disregarded as such. - Low margin rates increase the probability of a move in an underlying direction because it is cheaper. High margin rates => the market is anticipating a move in this direction, thus a more expensive rate. Sudden 5-10x rate raises imply a possible reversal soon. high - 0.1%, avg - 0.01-0.02%, low - 0.001-0.005% You can also check out: - BFXLS Longs/Shorts on BFXData - Bitfinex L/S margin rates and Hedged L/S on datamish - Bitmex L/S on Coinfarm.online
Pine Script™ indicator
by RagingRocketBull
3
Earnings Support and Resistance Levels [NeoButane]Inspired by @LazyBear's/@timwest's script: Usage: support and resistance levels based on averaging price around earnings and quarterly opens. What it is plotting: 1. A horizontal level whenever earnings occur. If actual earnings is higher than estimated, the line turns green, else red. 2. A horizontal level every quarterly open, colored black. 3. An average between the two mentioned above, colored orange. 4. 5% moves away from 3M open and earnings 5. Misc: 5% move away from that 5% move away, then 10% move away from the 2nd 5% move away. By default, 4 and 5 are off to reduce visual noise. Idea: Traders panic around certain dates that always happen, and traders always panic in the wrong direction. The market is composed of traders trading in the wrong direction at the same time, all the time. That means price will bounce back and forth as the gambling dens colloquially known as 'forex brokerages' or 'stock exchanges' take your money in the form of fees, time, and liquidations. So I put two lines on the chart and put one right in between, because it always goes back. I hope you can find it useful! Note: This was a part of the old fundamental data indicators and is not officially for use, so while it should work on most U.S. stocks and a couple of other exchanges, it is not perfect.
Pine Script™ indicator
by NeoButane
1
Multiplier ChartI am proposing an alternative to the percent change. An alternative that is symmetrical to both positive and negative change, unlike percentage change. The simple idea is to have a positive number if the reference value (called val in the script) is lower than the stock value and needs to be multiplied; a negative number instead if the reference number is higher than the stock value, so the reference value needs to be divided. Multiplying all by 100 to give clearer and more readable results, the Multiplier would have a huge gap between +100 and -100, because a stock multiplied by 1 or divided by 1 are the same thing. So we need to compromise and move all positive numbers down by 100 and all negative numbers up by 100. This actually gives a similar result to percentage change, and it is actually identical in the positive range. The fundamental difference lies on the negative range, which is completely symmetrical. So if a stock goes up 100 points one day (doubles), and the next it goes down another 100 points (halves), at the end of the second day the stock has the same value as it had at the beginning of the first day! On percentage change it would be +100% the first day and -50% the second. We mustn't undervalue the human tendency to compare a 1% change to a -1% change, but they do not mean the same even if they seem to indicate so. A clear example of this can be found on CMC 0.60% -3.56% -3.56% (CoinMarketCap), in which each day are shown the best and worst performing coins of the day. So you might see a +900% there in the top performing, but you'll never see a -900%, because percentage change cannot go further than -100%. It is a fundamentally asymmetric scale that can confuse people a lot especially in those fast moving new markets.ù I am welcome to feedback and all kinds of opinions and critics. Some interesting things to note: you can use it as a percentage change indicator or as a different perspective to a stock chart. In fact, it lets you see how big of a difference it made buying coins when they were very cheap, because when they are cheap a difference of what it might seem nothing is amplified by all the gains that the stock/coin made after. So, looking at coins charts using this indicator shows how "not flat" were the early days, which in a normal chart are flattened to 0.
Pine Script™ indicator
by cad0p
1
Simple Horizontal Value and Offsets [Auto Shift]Original (Simple Horizontal Value and Offsets/SHV) Requested by @TAFA94 Description: Simple adjustable incremented horizontal offset lines extending up and down from a Median point. Set full value for manual Median point control, or set an incremental rounding value for auto Median adjustment. Source and look-back period inputs for fine tuning auto adjust. Auto adjust on by default - can be toggled off for straight manual control. **NOTE** All values will likely need to be changed immediately on applying this script, in order to properly fit your charts specific price/value range and/or time resolution. Cheers!
Pine Script™ indicator
by JayRogers
6
Trailing Sharpe RatioThe Sharpe ratio allows you to see whether or not an investment has historically provided a return appropriate to its risk level. A Sharpe ratio above one is acceptable, above 2 is good, and above 3 is excellent. A Sharpe ratio less than one would indicate that an investment has not returned a high enough return to justify the risk of holding it. Interesting in this example, SPY's one year avg Sharpe ratio is above 3. This would mean on average SPY returns 3x better returns than the risk associated with holding it, implying there is some sort of underlying value to the investment. When the sharpe ratio is above its signal, this implies the investment is currently outperforming compared to its typical return, below the signal means the investment is currently under performing. A negative Shape would mean that the investment has not provided a positive return, and may be a possible short candidate.
Pine Script™ indicator
by Rashad
9
UCS_Extreme Snap Back (TVI)I am calling it a SNAP BACK indicator. Utilizing the TVI (Transactional Value Index - Link below for indicator / setups) You can pretty much guess when any instrument could slow down, last stand in a pullback and the last few candles before losing its strong trend. It varies per person, a short term trader can use this, Long term traders can hedge with options. A great tool for my trading. Thought I will share this. This utilizes TVI indicator, currently the TVI is manipulated manually, I have automated a version for future release. Embrace trading - keep the money flowing.
Pine Script™ indicator
by UDAY_C_Santhakumar
50
UCSgears_Transaction Valuation IndexThis is an indicator, That works great in a wip-saw market range. Would not use this to trade in a breakout. I am calling it the "Transaction Value Index (UCS_TVI)", The reason is because, it measure where the price currently from the mean trade value. The cross represents the highest trade value on that day, circle represents the lowest trade value. In other words, Top and bottom of the candle wicks, in relation to the mean trade value (MTV). Watchout for Further Updates on Optimizing this indicator. DO NOT CONFUSE IT WITH FUNDAMENTAL VALUATION, THIS IS PURELY TECHNICAL VALUATION TECHNIQUE As Usual, Good Luck List of All my Indicators - www.tradingview.com
Pine Script™ indicator
by UDAY_C_Santhakumar
4
UCS_Value BandsThis Indicator is yet another variation of KC. Inspired from Value Charts webinar. I have seen their videos on youtube. What appears to be a variation of KC. They use 12 bands Showing the zone, and different MA for different timeframes. You can get this indicator close to accuracy by changing the inputs (ATR) and (Deviations) This also can be used with the triple ATR setup - Change the values to EMA to desired value. To obtain the First band to plot @ 1, Change the Band deviation to 0.25. Also can be used as as the Acceleration Band. With Current Settings, the Third Band will plot the Acceleration band. List of All my Indicators - www.tradingview.com Lycka Till
Pine Script™ indicator
by UDAY_C_Santhakumar
3