Get started

IB

Opening RangeThe opening range or first 30 minutes of trading during the day sets the tone and becomes an important reference through the rest of the day. Price will react as it reaches the high and low of the opening range. Backtesting has shown that the strategies based on the opening range have merit and provide an edge in trading. By not being aware of these points of reference you put yourself at risk. In addition to the opening range, the distance from the high or low of the opening range plus the width of the opening range forms another important reference point. Opening Range Rules. Price must break out of the opening range in order to have a trending day. As long as price is inside the opening range, expect the trade to be choppy. Once price leaves the opening range the market can begin to trend. However, before it trends most times it will retest the boundary of the opening range. This is a critical point, and a better than average entry for a position to join the trend. However, if price closes back inside the opening range watch out. Re-entry to the opening range has a high probability of going to the middle of the opening range, and a better than average probability of crossing the entire opening range. In the above chart we can see price broke below the opening range then returned to retest the opening range before beginning a downward trend that delivered 175 pts on NQ. Upon re-entering the opening range price tried to break down again but ultimately traveled up until it hit the 50% mark of the opening range. Once a trend has begun the first target is the green line which is 1 width of the opening range outside of the opening range. Once price broke out of the opening range to the upside, it came back to retest the opening range high, before beginning an uptrend that delivered 120 pts on NQ.
Pine Script™ indicator
by aaronmefford
3
Initial Balance |ASE|Introduction Initial Balance (IB) refers to the price data that is formed during the first hour of a trading session. It is an important concept in trading as it provides insights into the market's opening sentiment and potential trading opportunities or reversals for the day. There are multiple trading sessions throughout the day. The most popular, the NY Session, is open from 9:30 am to 4:00pm EST making the Initial Balance(IB) range the first hour (9:30-10:30) The other sessions include London, Tokyo, and Sydney. IB Customization The Initial Balance lines are fully customizable to fit the traders need. Show Initial Balance This setting will plot the Initial Balance Fill/Extend IB Range The Fill IB Range toggle fills the area in between the IB High and IB Low. Use the IB Fill Color option to change the fill color in the “Line Settings” group on the settings panel. The Extend IB Range extends the IB lines until the market closes. Show 1x/2x Extensions The Show 1x Extension toggle displays 1 times the IB range line (IB High - IB Low) above IB High and 1 times the IB range line below IB Low. The Show 2x Extension toggle displays the 2 times the IB range line (IB High - IB Low) above IB High and 2 times the IB range line below IB Low. *Use the Extension Level Color in the “Line Settings” to change the color of the lines. Show Middle Levels The Show Middle Levels toggle shows all the 50% lines between the upper 2x and upper 1x line, upper 1x and IB high, IB high and IB low, IB low and lower 1x line, and the lower 1x and lower 2x line. *Use the Mid Level Color in the “Line Settings” to change the color of the lines. Delete Previous Day’s Levels This setting will only show the current day's Initial Balance and delete all previous day levels to produce a clean chart. How To Use: The Initial Balance Range can support a bias as it shows the opening market sentiment. By watching price action interact with the Initial Balance Range we can watch for indications of trending or failing moves at the high or the low and overall a ranging or trending session. The extension levels are projections as to where price could potentially reach in a trending market. If we are bullish and trending higher, we would want to see price reach the first extension, signs of strength at these levels can be used as confirmation to target other levels. Overall, all these levels can and should be used as support and resistance levels, and as always, can not be used by themselves and require additional confirmation, whether that be an indicator or price action. Below you can see chart examples of these levels in action.
Pine Script™ indicator
by AseAlgo
10
iBox, Initial Balance | IB High, Low, Midpoint | OpeningThis Indicator will print basically 4 lines. You have to understand the importance of the "Initial Balance" the first trading hour of Cash session is very important in trading stocks and indizes. So you will get 4 lines: Opening Initial Balance High Initial Balance Low Initial Balance Midpoint/Halfback Most indicators for Range Box, Opening Trade, Opening Range, Initial Balance, iBOX and "Ultimate Lines" will only use the timezone of the exchange or your own timezone. I'm living in europe and we have this daylight saving time change in Summer/Winter - which will cause problems with most of the existing indicators or at least will push you to change the times regularly. Another important point: I really like to switch the indizes when trading on my mobile. So what will happen when you set up opening range for DAX at 09:00 and then switch to S&P500? All indicators I tried failed here - they will just draw a wrong line for SPX, NDX, DJI, FTSE, ASX etc. I fixed that and hard coded stock exchanges and ticker symbols into 3 main groups Initial Balance EU/US/Asia For example we take DAX - XETRA DAX is opening at 09:00 MEZ (Europe/Berlin) The Initial Balance is set during the H1 Candle from 09:00 - 09:59 Please be aware, that some cash indizes only deliver data to TradingView after the "opening auction" - so for Xetra DAX you have to book live data and often you will only see data at 09:02/09:03 after the opening auction. So you will get different opening lines compared from cash to future or your CFD provider. Future and CFD should fit for 99% The Opening Line will be drawn at exactly 09:00 IB High on the highest price during the H1 candle IB Low on the lowest price during the H1 candle IB Halfback is simple: (IB High + IB Low) / 2 The lines will be drawn from cash start until next day and will end 2 minutes before the next cash session will start again. Please make your own experience! Activate the indicator for a CFD or Future switch to M15 and watch the wicks around the 4 lines. Even in the night or the next morning before the next Initial Balance will be set. For me the lines are valid for around 24 hours and often longer. That's why it's good to have the old lines on the chart too. To-do: Yesterday high / low / close / halfback (also for last week and month) Labels for the lines - sometimes only the colors will confuse you - a simple label should be a benefit (IB_h, IB_l, IB_1/2, 1D_o) Range Lines for Asia Range and Premarket Range - additionaly a parameter to disable premarket lines when premarket is trading in asia range. Add Alert condition to get alerts after IB is set If you have and thoughts, ideas or improvements, please send me an message or leave an comment! Like i said, the stock exchanges and ticker symbols are hard coded and can be extended for all relevant assets. Have fun and i really hope this indicator will help improving your trading experience!
Pine Script™ indicator
by Roul_Charts
32
Session Levels - Ultimate Range IndicatorSession Levels - Ultimate Range Indicator Primarily developed for trading the E-MINI Futures Markets like NQ or ES from the CME Group, but also more than suitable for Crypto or other instruments. This indicator highlights the chosen session, which can be Globex, Asian, London and New York. It plots the important levels and also renders the Opening Range as it forms (a.k.a. Initial Balance). After the 1st hour Opening Range is finished, it can plot the Standard Deviations / Projections. See below for a complete feature list. All Opening Ranges on chart and for the New York session the Range Projections are turned on: s3.tradingview.com How to use (example): If you are trading the Nasdaq Futures (NQ!) Enable the Globex Overnight session. Basically in the Futures Market, the Globex session is everything outside of US trading hours of Stocks. This draws the important overnight levels, like the Low, 25%, 50%, 75% and the High. Enable the New York Session with Levels and Opening Range. Generally, 70% of the time the 1st hour will put a Low or High of the day. If the price is trading above the Globex Low, most likely the Low of the Day is formed and the price target for the day will be 1.5x Standard Deviation and 2x Standard Deviation. [*} Deviation of the Initial Balance depends on the volume ad overall market structure. ** This is not financial advice or any guarantee ** Features: Show each Session Highlighted on Intraday chart in it's own color (each session can be turned off and has customizable times and color) Show Line Levels of each session: Low, 25%, 50%, 75% and the High (customizable color) Show the Opening Range (Initial Balance) of the Asian, London and New York session. Note: NY has more options. Opening Range is displayed as a box with level lines (customizable color) Levels are drawn to the end of the NY Cash session (customizable time) Show IB Standard Deviations 0.5 - 3.0. Calculated from the Opening Range (Initial Balance) Option to display Higher Timeframe levels: Previous Day Open/Close and Previous Week Open/Close All level lines and OR boxes size dynamically as the session progresses Built in Alerts for when price hits key levels. e.g. Alert when price crosses the NY Opening Range High. Or an Alert when the first STDEV is hit. Option to toggle display of drawings for Today's trading session only, or Show all recent session levels. This keeps the chart clean or not. Extras: The NY Opening Range also has a 50% level line The NY Opening Bar can be highlighted separately The Level Lines can have small labels turned on/off. Values are only shown on mouse over to keep a clean chart Keep in mind: 1) This indicator works on all instruments, but on instruments with limited market hours, your chart setting has to be set to "Extended Hours" otherwise. For example TSLA on NASDAQ. 2) The Exchange Time Zone for the CME Group is Chicago UTC-6. So the session times you configure in the settings menu are based on that timezone too. 3) Globex opens at 5pm CST and closes when the US session starts 8:30CST. 4) When enabling the Alerts in the Indicator settings, be sure to also create an alarm for this indicator using the Alarm function of Tradingview.
Pine Script™ indicator
by ArdOfCrypto
14
Single Prints - Session Initial BalancesDisclaimer: Expose yourself to the knowledge of different trading methods. If you are unaware of what a Single Print is then do some research and broaden your knowledge. This indicator has only been tested on BTCUSDT Binance pair. This indicator is meant to be used on the 30 minute timeframe to highlight Single Prints. The calculations are base on 0000 UTC and what Single Prints are created during that day. Single Prints Single Prints are where prices moves to fast through an area (on a 30 minute timeframe), in the case of this indicator in $50 intervals, where the price has not yet cross back past, represented as orange lines. If you were viewing this on a Time Price Opportunity Chart (TPO) each $50 would be represented as a square with a letter in it. If price has only been through that area once, within that 24 hour period, then it is called a Single Print. If however the Single Print is on the lower wick of the candle it is called a Buying Tail and on the Upper Wick a Selling Tail. Single Prints leave low volume nodes with liquidity gaps, these inefficient moves tend to get filled, and we can seek trading opportunities once they get filled, or we can also enter before they get filled and use these single prints as targets. Single Prints are a sign of emotional buying or selling as very little time was spent at those levels and thus there is no value there. The endpoints of single print sections are considered to be potential support or resistance points and or get filled (like a CME gap). The above is only a very short summary, to understand Single Prints, Buying Tails and Selling Tails more please do your own research (DYOR). References: Trading Riot Volume Profile - Website TOROS TPO Charts Explained - Youtube Session Boxes Session Boxes are the high and low of that markets session before the new market session opens. I used the data from the website Trading Hours for the time input. White box – Start of day UTC 0000 to Market Close UTC 2000 Purple box – Asia Start UTC 0130 to London Start UTC 0700 Yellow box – London Start UTC 0700 to New York Start UTC 1330 Blue box – New York Start UTC 1330 to Market Close UTC 2000 Red box – Market Close UTC 2000 to End of day UTC 2359 References: Trading Hours - Website Initial Balance The Initial Balance is the market range between the high and low of the first hour of trading for the market. In the case of crypto when is the Initial Balance if it is 24/7. Context of Initial Balance: The Initial Balance is traditionally the range of prices transacted in the first hour of trade. Many regard the Initial Balance as a significant range because, especially for the index futures which are tied to the underlying stocks, orders entered overnight or before the open are typically executed prior to the end of the first hour of trade. Some use it to understand how the rest of the day may develop, while others use it as a span of time to avoid trading altogether because of its potential volatility. For this indicator I have coded the Initial Balance time as below: White Box - To appear for the first hour of the day 0000 to 0100 UTC . Purple Box - To appear for the first hour of the day 0130 to 0230 UTC . Yellow Box - To appear for the first hour of the day 0700 to 0800 UTC . Blue Box - To appear for the first hour of the day 1330 to 1430 UTC . Red Box - To appear for the first hour of the day 2000 to 2100 UTC . The diagram above shows some examples: How price (white arrows) retraces the single prints. How price (red arrows) uses the single prints as S/R. References: Not Hard Trading – Website My Pivots Initial Balance - Website Thanks go to: StackOverFlow Bjorn Mistiaen Trading View user mvs1231 Please message me if you have any feedback/questions. I am looking at developing this indicator further in the future.
Pine Script™ indicator
by Frien_dd-DisDev
35
Chart Champions - Part 2 - CCV IBs POCsThank you for sparing you time to read my indicator. This indicator has been created as a suite of 3. This was to ensure that those with only the Free Trading View account could benefit (with their restriction to 3 indicators). Please ensure you install each indicator and read each indicator write up to fully understand what has tried to achieved. Chart Champions – Part 1 –Lvls nPOC VWAPS This indicator is broken down into: • Levels • VWAPS • Naked Point of Control Levels It displays the levels to the right of the price Axis to enable the user to have a cleaner chart. The below levels will automatically appear: dOpen – pdHigh – pdLow – pdEQ – pwEQ Optional Levels include: mOpen – pmOpen – pdOpen – dbyOpen – wOpen – pwOpen VWAPs Optional VWAPs Daily (including pdVWAP close) – Weekly – Monthly Naked Points of Control (nPOC) To view the nPOC move the chart back in time to pick up the nPOCs. Chart Champions – Part 2 – CCV IBs POC This indicator is broken down into: • Chart Champions Value • Initial Balance • Points of Control Chart Champions Value (CCV) CCV is based on the 80% rule of the dOpen opening outside of the pdVAH/pdVAL. Please do you own research to fully understand how this trading strategy works (readily avaliable online). Initial Balance (IB) IB is based on the first 60 minutes of the market opening. It captures the highest and lowest points within that 60 minutes. Please do you own research to fully understand how this trading strategy works (readily avaliable online). Points of Control (POCs) POC are the price levels where the most volume was traded. Developing POC (dPOC) will constantly move with volume/price action through out the day. Optional POCs Previous Day POC (pdPOC) – Day Before Yesterday POC (dbyPOC) Chart Champions – Part 3 – Sessions - Manual Input This indicator is broken down into: • Manual Inputs (daily, weekly, monthly) • IGOR SessionsTtimes • Pre + Market Openings Manual Input Daily x3 Weekly x 3 Monthly x 3 This allows the trader to put in specific levels. IGOR Session Times This is a user specific requirement to highlight cetain times during the day, displayed at the bottom of the chart in the colour strip. Pre + Market Openings This allows the user to see when pre market trading has started and with the live maket has started, displayed at the top of the chart in colours. A huge thank you goes out to: Stackoverflow users AnyDozer and Bjorn. TV user ahancock for allow me use of this code. Disclaimer the lower the timeframe the more information it processes.
Pine Script™ indicator
by Frien_dd-DisDev
60
Initial Balance & extensions Custom session time and IB durationThe indicator will plot Initial Balance levels and extensions. The session start and end times are configurable depending on instrument, as well as the Initial Balance end time. The session times must be entered in the underlying instrument's timezone, for example: ES-futures (Chicago Timezone) Session Start: 0830 Initial Balance End: 0930 Session End: 1515 US-Stocks (New York Timezone) Session Start: 0930 Initial Balance End: 1030 Session End: 1600 Europe Futures (Madrid Timezone) Session Start: 0800 Initial balance End: 0900 Session End: 2200 Colors and linewidths are also customisable.
Pine Script™ indicator
by czoa
30