Get started

Lines

Time Vertical LinesVLines - Time-Based Vertical Lines with Zones This PineScript indicator creates vertical time lines with customizable zones between them. Perfect for marking trading sessions, key market times, or any time-based analysis. Key Features: - 5 configurable time lines - 3 customizable zones (between lines 1-2, 2-3, and 4-5) - Each zone features: - Background shading - Horizontal lines at high/low points - Independent color controls - Adjustable line styles and widths - Time zone offset adjustment - Option to show/hide historical lines Installation Instructions: 1. Open TradingView's Pine Script Editor 2. Create a new script 3. Copy and paste the entire code 4. Add to Chart Setup Guide: 1. Time Zone Adjustment: - Find the "Time Zone Offset (Hours)" setting - Adjust if lines appear at wrong times - Example: If lines appear 3 hours early, set offset to 3 2. Basic Time Lines (1-3): - Each line has settings for: - Hour (0-23) - Minute (0-59) - Color - Show/Hide toggle 3. Session Lines (4-5): - Special lines typically used for session marking - Same settings as basic lines - Default red color to distinguish from other lines 4. Zone Customization: Three separate zones are available: - Zone 1-2 (between first and second lines) - Zone 2-3 (between second and third lines) - Zone 4-5 (between fourth and fifth lines) Each zone can be customized with: - Background color and transparency - Horizontal line color - Line style (Solid/Dashed/Dotted) - Line width - Individual show/hide toggles for zone and lines 5. Additional Settings: - "Show Historical Lines" - toggle to show/hide lines on previous days - Global line style and width settings for vertical lines Suggested Uses: 1. Mark pre-market, market, and post-market sessions 2. Highlight specific trading windows 3. Track time-based support/resistance levels 4. Monitor price ranges during specific time periods Tips: - Start by setting just one zone to get familiar with the controls - Use different colors for different sessions/time periods - Adjust transparency to maintain chart visibility - Use the show/hide toggles to focus on specific times - The horizontal lines automatically mark the high/low range between time points
Pine Script™ indicator
by OpitaMaster
Time-input Lines [MFX]THE LINES The indicator plots a horizontal price line at a specified hour and minute (default: 9:30 - Equities Open). This line extends for a predefined number of minutes (default: 60 minutes - Opening Range Full Spectrum). Additionally, the indicator can plot two vertical lines: one at the selected start time and another at the end of the horizontal line. STYLE Both the horizontal and vertical lines are fully customizable, allowing adjustments to color, style, and width. For a cleaner, minimalist chart, any of these lines can be disabled. TIMEZONE By default, the indicator operates in the New York time zone, but this can be modified by unchecking the option and specifying a custom offset relative to UTC/GMT. The default offset is +2, corresponding to CEST (Central European Summer Time, UTC/GMT+2). The offset can be adjusted with up to 15-minute precision, where 0.25 represents a quarter of an hour.
Pine Script™ indicator
by MichaelFX_ICT
Peak and Trough Tracker by Mustafa KAPUZPeak and Trough Tracker This indicator identifies the highest and lowest prices reached in two user-defined time periods. It then draws two lines connecting these peak and trough points. The purple line represents the connection between the highest prices, while the aqua line represents the relationship between the lowest prices. Both lines extend into the future and past, providing insights into potential support and resistance levels. How to Use: Add the indicator to your chart. Enter two time periods. Analyze the lines connecting peak and trough points. This tool helps visually understand the market's key turning points and adjust your investment strategy based on these insights. Zirve ve Dip Noktaları İzleyici Bu indikatör, kullanıcı tarafından belirlenen iki zaman periyodunda piyasanın ulaştığı en yüksek ve en düşük fiyatları tespit eder. Ardından, bu zirve ve dip noktalarını birleştiren iki çizgi çizer. Mor çizgi, en yüksek fiyatlar arasındaki bağlantıyı gösterirken; aqua çizgi, en düşük fiyatlar arasındaki ilişkiyi temsil eder. Her iki çizgi de geleceğe ve geçmişe doğru uzanarak, potansiyel destek ve direnç seviyeleri hakkında fikir verir. Kullanımı: İndikatörü grafik üzerine ekleyin. İki zaman periyodu girin. Zirve ve dip noktalarını birleştiren çizgilerin analizini yapın. Bu araç, piyasanın önemli dönüm noktalarını görsel olarak anlamanıza ve yatırım stratejinizi bu bilgilere göre ayarlamanıza yardımcı olur.
Pine Script™ indicator
by kapuzmustafa
ZigZag Multi [TradingFinder] Trend & Wave Lines - Structures🔵 Introduction "Zigzag" is an indicator that forms based on price changes. Essentially, the function of this indicator is to connect consecutive and alternating High and Low pivots. This pattern assists in analyzing price changes and can also be used to identify classic patterns. "Zigzag" is an analytical tool that, by filtering partial price movements based on the specified period, can identify price waves across different time frames (short or long term). 🔵 Reason for Creation The combination of "short term zigzag" and "long term zigzag" enhances accuracy and reduces analysis time. In a time frame, "long term zigzag" represents the main trend, while "short term zigzag" depicts short-term waves. 🔵 How to Use After selecting the desired time frame and adding "zigzag" to the chart, begin utilization. Keep in mind to identify the main market trend from "long term zigzag" and the minor waves from "short term zigzag". 🟣 Important: Additionally, classic patterns such as HH, LH, LL, and HL can be recognized. All traders analyzing financial markets using classic patterns and Elliot Waves can benefit from the "zigzag" indicator to facilitate their analysis. 🔵 Settings Short term zigzag : In this section, you can adjust settings such as time frame range, display mode, color, and line width of the zigzag lines. Short term label : This section allows you to activate or deactivate the display of zigzag labels according to your needs. You can also customize their color and size. Long term zigzag : Here, you can adjust settings for time frame range, display mode, color, and line width of zigzag lines. Long term label : Similar to short term label settings. The recommended time frame for "long term zigzag" is between 9 to 15, and for "short term zigzag" is between 3 to 5. 🟣 Important Notes : Considering the different behaviors of financial markets and various time frames, it is recommended to experiment with different time frame settings when using "zigzag" to find the best settings for each symbol and time frame, thereby preventing potential errors. 🟣 Terminology Explanations : "HH": When the price is higher than the previous peak (Higher High). "HL": When the price is higher than the previous low (Higher Low). "LH": When the price is lower than the previous peak (Lower High). "LL": When the price is lower than the previous low (Lower Low).
Pine Script™ indicator
by TFlab
14
Polyline PlusThis library introduces the `PolylinePlus` type, which is an enhanced version of the built-in PineScript `polyline`. It enables two features that are absent from the built-in type: 1. Developers can now efficiently add or remove points from the polyline. In contrast, the built-in `polyline` type is immutable, requiring developers to create a new instance of the polyline to make changes, which is cumbersome and incurs a significant performance penalty. 2. Each `PolylinePlus` instance can theoretically hold up to ~1M points, surpassing the built-in `polyline` type's limit of 10K points, as long as it does not exceed the memory limit of the PineScript runtime. Internally, each `PolylinePlus` instance utilizes an array of `line`s and an array of `polyline`s. The `line`s array serves as a buffer to store lines formed by recently added points. When the buffer reaches its capacity, it flushes the contents and converts the lines into polylines. These polylines are expected to undergo fewer updates. This approach is similiar to the concept of "Buffered I/O" in file and network systems. By connecting the underlying lines and polylines, this library achieves an enhanced polyline that is dynamic, efficient, and capable of surpassing the maximum number of points imposed by the built-in polyline. 🔵 API Step 1: Import this library import algotraderdev/polylineplus/1 as pp // remember to check the latest version of this library and replace the 1 above. Step 2: Initialize the `PolylinePlus` type. var p = pp.PolylinePlus.new() There are a few optional params that developers can specify in the constructor to modify the behavior and appearance of the polyline instance. var p = pp.PolylinePlus.new( // If true, the drawing will also connect the first point to the last point, resulting in a closed polyline. closed = false, // Determines the field of the chart.point objects that the polyline will use for its x coordinates. Either xloc.bar_index (default), or xloc.bar_time. xloc = xloc.bar_index, // Color of the polyline. Default is blue. line_color = color.blue, // Style of the polyline. Default is line.style_solid. line_style = line.style_solid, // Width of the polyline. Default is 1. line_width = 1, // The maximum number of points that each built-in `polyline` instance can contain. // NOTE: this is not to be confused with the maximum of points that each `PolylinePlus` instance can contain. max_points_per_builtin_polyline = 10000, // The number of lines to keep in the buffer. If more points are to be added while the buffer is full, then all the lines in the buffer will be flushed into the poylines. // The higher the number, the less frequent we'll need to // flush the buffer, and thus lead to better performance. // NOTE: the maximum total number of lines per chart allowed by PineScript is 500. But given there might be other places where the indicator or strategy are drawing lines outside this polyline context, the default value is 50 to be safe. lines_bffer_size = 50) Step 3: Push / Pop Points // Push a single point p.push_point(chart.point.now()) // Push multiple points chart.point points = array.from(p1, p2, p3) // Where p1, p2, p3 are all chart.point type. p.push_points(points) // Pop point p.pop_point() // Resets all the points in the polyline. p.set_points(points) // Deletes the polyline. p.delete() 🔵  Benchmark Below is a simple benchmark comparing the performance between `PolylinePlus` and the native `polyline` type for incrementally adding 10K points to a polyline. import algotraderdev/polylineplus/2 as pp var t1 = 0 var t2 = 0 if bar_index < 10000 int start = timenow var p = pp.PolylinePlus.new(xloc = xloc.bar_time, closed = true) p.push_point(chart.point.now()) t1 += timenow - start start := timenow var polyline pl = na var points = array.new() points.push(chart.point.now()) if not na(pl) pl.delete() pl := polyline.new(points) t2 += timenow - start if barstate.islast log.info('{0} {1}', t1, t2) For this benchmark, `PolylinePlus` took ~300ms, whereas the native `polyline` type took ~6000ms. We can also fine-tune the parameters for `PolylinePlus` to have a larger buffer size for `line`s and a smaller buffer for `polyline`s. var p = pp.PolylinePlus.new(xloc = xloc.bar_time, closed = true, lines_buffer_size = 500, max_points_per_builtin_polyline = 1000) With the above optimization, it only took `PolylinePlus` ~80ms to process the same 10K points, which is ~75x the performance compared to the native `polyline`.
Pine Script™ library
by AlphaViz
1
NSDT Horizontal VWAPThis script plots VWAP as a horizontal line starting at the most recent candle and extending backwards for a period of 10 to make it easier to see. (default is 10 but can be changed to fit your needs) You may only want to see where VWAP is currently and not need to see the entire day. Helps keep the chart clean. Colors and line settings can all be modified. You can show the original VWAP plot as well for reference. What Is the Volume-Weighted Average Price (VWAP)? The volume-weighted average price (VWAP) is a technical analysis indicator used on intraday charts that resets at the start of every new trading session. It's a trading benchmark that represents the average price a security has traded at throughout the day, based on both volume and price. VWAP is important because it provides traders with pricing insight into both the trend and value of a security.
Pine Script™ indicator
by NorthStarDayTrading
Drawings_publicLibrary "Drawings_public" : Functions to manage drawings on the chart extend_line(lineId, labelId)   : Extend specific line with its label   Parameters:      lineId      labelId update_line_coordinates(lineId, labelId, x1, y1, x2, y2)   : Update specific line coordinates with its label   Parameters:      lineId      labelId      x1      y1      x2      y2 update_label_coordinates(labelId, value)   : Update coordinates of a label   Parameters:      labelId      value delete_line(lineId, labelId)   : Delete specific line with its label   Parameters:      lineId      labelId update_box_coordinates(boxId, labelId, left, top, right, bottom)   : Update specific box coordinates with its label   Parameters:      boxId      labelId      left      top      right      bottom delete_box(boxId, labelId)   : Delete specific box with its label   Parameters:      boxId      labelId
Pine Script™ library
by LudoGH68
Forex Strength IndicatorThis indicator will display the strength of 8 currencies, EUR, AUD, NZD, JPY, USD, GBP, CHF, and CAD. Each line will represent each currency. Alongside that, Fibonacci levels will be plotted based on a standard deviation from linear regression, with customizable lengths. For more steady Fibonacci levels, use higher lengths for both Standard Deviations and Linear Regression. All currency lines come from moving averages with options like EMA, SMA, WMA, RMA, HMA, SWMA, and Linear Regression. When lines of the active pair are far from each other, it means higher divergence in those currency strengths among the other pairs. The closer the lines are, the lower the divergence. You can use the Fibonacci levels as points for the reversal or end of the current trend. When the lines cross can be used as a parameter for a more accurate signal of the next movement. All 28 pairs are loaded from the same time frame and will use the same moving average for all of them Alerts from the line crossing are available.
Pine Script™ indicator
by ThiagoSchmitz
3
OHLC ToolOHLC Tool allows you to display Current or Historical OHLC Values as horizontal lines that extend to the right on your chart. Features Variable Lookback to display a specific historical bar's values. Default = 1 (Previous Candle) Customizable Timeframe to view HTF Candle values. Custom Line Colors, Styles, and Thicknesses. Price Scale Value Display Capability. For displaying the line values and labels on the price scale you will need to enable: "Indicator and financials name labels" and "Indicator and financials value labels" These options are found in the Price Scale Menu under Labels. Price Scale Menu > Labels When you do this you will notice your other indicator values will also be on the price scale, if you wish to disable these, go to the indicator settings under the "Style" Tab, Uncheck the "Labels on price scale" box. Indicator Settings > Style > "Labels on price scale" Enjoy!
Pine Script™ indicator
by SamRecio
8
[Mad] Active LineThis is a simple line tool that can give you active feedback based on the closing price. It is intended for a live chart whose ticker is not changed by the user every 10 minutes, like a general overview of an asset in a higher time frame. What can it provide: Price difference from the price to the line Price at the current collision point How to use it: When opened, it requests 2 input points from you. After you set these 2 points, it will set the "Active Line" for you, like the normal TV line. One thing to know is that you can't place into the future, so "extend" is always on by default. and as always, have fun trading the assets up and down :-)
Pine Script™ indicator
by djmad
2
Wicked Good S&R Zones// Hello tradeurs, ChasinAlts here with a script you've DEFINITELY never seen before. Hope everyone is well. Ok, so heres the low-down...When a wick's // % size is above the threshold set by the user it is plotted with light blue (these aren't really the significant ones) and are put into an array. // These large wick lines are great S&R lines but we're looking to filter out to only the best ones. So, after all the large wicks are recorded for the // chart and lines drawn, it then calculates the area between each of these lines in % (you can think of the lines as the upper and lower lines to a box // if you'd like...ie. it is one of the ways to view the final BEST S&R lines). What we are want is the largest of ALL the % areas between lines and to // use these as our ultimate S&R Areas. Depending on the Min % Wick size that is chosen, you will find price usually either bouncing between these levels or // that price will keep bouncing off of the same level until a large spike (up or down) occurs in price and the price will finally breach the level its been // testing over and over. Once this DOES occur the level that was just broken many times will be the furthest point back for the retest. Now, as stated // before there are 2 ways to view the output data. Either way it will show the largest % area between the lines as it is developing down the line of // progressing bars on the chart (that means it WILL change but usually a portion of the previous area/box will be used for the newer smaller box or that // the area/box will jump back and forth between the same few areas every now and again). Viewing it as a box will show the updated largest box // (as stated twice now) but viewing it in it's S&R Line form will draw a new S&R line at the top and bottom of where the box would be if it was selected // EXCEPT that these lines will persist across bars and you will continuously see how these levels will continue to be revisited and constantly used // as S&R Lines as time progresses. (SO box only show the largest area and lines draws line at the top and bottom of box and persists across bars). // There is not repainting that can occur. I hope you all enjoy this as I've found it EXTREMELY beneficial bc it's rare that when price first gets to a // printed S&R level that it will shoot through it so you can depend on it bouncing off the the levels often multiple times. I've included comments in all // of the code for your convenience. Also, the higher subscription plan you have (thus the more bars/data you have access to...the more S&R Lines will be drawn). // Wish you all the best in your endeavors and may the force be with your trades, and as ALWAYS...Peace and Love people....Peace and Love. -ChasinAlts out.
Pine Script™ indicator
by A_Traders_Edge
3
Support & Resistance Trendlines with PP + Fib. Channel█ Support & Resistance Trendlines with Pivot Points + Fibonacci Channel This script automatically draw support and resistance trend lines based on pivot points and add a fibonacci channel. It will show potential patterns with the help of support and resistance lines as well as breakout target and pullback entry with the fibonacci extension and retracement levels. It is based on atolelole's script, I only made it more configurable so please check out his script. I added the possibility to change values and add additional retracement and extension levels. I also made it customizable with the possibility to change lines color, width and style.
Pine Script™ indicator
by Yatagarasu_
28
AlgebraLibrary "Algebra" Algebra functions. line_fromXy(x1, y1, x2, y2)   Get line slope and y-intercept from coordinates   Parameters:      x1 : x coordinate 1 (int - bar index)      y1 : y coordinate 1 (float - price/value)      x2 : x coordinate 2 (int - bar index)      y2 : y coordinate 2 (float - price/value)   Returns: of line line_getPrice(x, slope, yInt)   Get line slope and y-intercept from coordinates   Parameters:      x : x coordinate to solve for y (int - bar index)      slope : slope of line (float)      yInt : y-intercept of line (float)   Returns: y (price/value)
Pine Script™ library
by reees
1
Yearly Monthly Vertical Lines [MsF]This indicator that draws vertical lines for each year and month starting from the specified date and time. For example, starting from August 26th, 2022, The annual vertical lines are Aug 26th, 2022, Aug 26th, 2021, Aug 26th, 2020, Aug 26th, 2019, Aug 26th, 2018, Aug 26th, 2017... It is useful to check the action of the chart at the event of each year and month. Caution: Since there is a limit to the Bar-Count that can be specified in the script language, depending on the chart period setting It may not be displayed. ------------------------- 指定した日時を起点として、年、月ごとに垂直線（縦線）を描画するインジケータです。 例えば、2022/9/1を起点とした場合、 年次のラインは、2021/9/1、2020/9/1、2019/9/1、2018/9/1、2017/9/1、2016/9/1... に描画します。 年、月ごとのイベント時のチャートの動きを確認するのに便利です。 ※過去イベント時の価格変動確認の際、手作業で垂直線を引くのが面倒なため、作成しました。 ＜注意＞ スクリプト言語で指定できるBarCntに制限がある為、チャートの期間設定によっては 表示されない場合があります。※今後改善の余地あり
Pine Script™ indicator
by Trader_Morry
12
R:R Trading System FrameworkFirst off, huge thanks to @fikira! He was able to adapt what I built to work much more efficiently, allowing for more strategies to be used simultaneously. Simply put, I could not have gotten to this point without you. Thanks for what you do for the TV community. Second, I am fairly new to pinescript writing, so I welcome criticism, thoughtful input and improvement suggestions. I would love to grow this concept into something even better, if possible. So please let me know if you have any ideas for improvement. However I do juggle a lot of different things outside of TV, so implementations may be delayed. I have decided, at this time, not to add alerts. First, because I feel most people looking to adapt this framework can add their own pretty easily. Also, given how customized the framework is currently, while also attempting to account for all the possible ways in which people may want alerts to function after they customize it, it seems best to leave them out as it doesn't exactly fit the idea of a framework. For best viewing, I recommend hovering over the script's name > ... > Visual order > Bring to front. Also I found hollow candles with mono-toned colors (like pictured) are more visually appealing for me personally. I HIGHLY RECOMMEND USING WITH BAR REPLAY TO BETTER UNDERSTAND THE FRAMEWORK'S FUNCTIONALITY. ▶️ WHAT THIS FRAMEWORK IS - A huge collection of concepts and capabilities for those trying to better understand, learn, or teach pinescript. - A system designed to showcase Risk:Reward concepts more holistically by providing all of the most popular components of retail trading to include backtesting, trade visual plotting, position tracking, market condition shifts, and useful info while positioned to help highlight changes in your risk:reward based decision-making processes. - A system that can showcase individual strategies regardless of trade direction, allowing you to develop hedging strategies without having multiple indicators that do not correlate with each other. - Designed around the idea that you trade less numbers of assets but manage your positions and risk based on multiple concurrently running strategies to manage your risk exposure and reward potential. - An attempt to combine all the things you need to execute with an active trading management style. - A framework that uses backtested results (in this case the number of averaged bars it takes to hit key levels) in real-time to inform your risk:reward decision-making while in-trade (in this case in your Trade Tracking Table using dynamic color to show how you might be early, on-time, or late compared to the average amount of backtested time it normally takes to hit that specific key level). ▶️ WHAT THIS FRAMEWORK IS NOT - A complete trading product. DO NOT USE as-is. It is a FRAMEWORK for you to generate ideas of your own and fairly easily implement your own triggering conditions in the appropriate sections of the script. ▶️ USE CASES - If you decide you like the Stop, Target, Trailing Stop, and Risk:Reward components as-is, then just understanding how to plug in your Entry and Bullish / Bearish conditions (Triangles) and adjust the input texts to match your custom naming will be all you need to make it your own! - If you want to adapt certain components, then this system gives you a great starting point to adapt your different concepts and ideas from. ▶️ SYSTEM COMPONENTS - Each of the system's components are described via tooltips both in the input menu and in the tables' cells. - Each label on the chart displays the corresponding price at those triggered conditions on hover with tooltips. - The Trailing Stop only becomes active once it is above the Entry Price for that trade, and brightens to show it is active. The STOP line (right of price) moves once it takes over for the Entry Stop representing the level of the Trailing Stop at that time for that trade. - The Lines / Labels to the right of price will brighten once price is above for Longs or below for Shorts. The Trade Tracking Table cells will add ☑️ once price is above for Longs or below for Shorts. - The brighter boxes on the chart show the trades that occurred based on your criteria and are color coded for all components of each trade type to ensure your references are consistent. (Defaults are TV built-in strategies) - The lighter boxes on the chart show the highest and lowest price levels reached during those trades, to highlight areas where improvements can be made or additional considerations can be accounted for by either adjusting Entry triggers or Bullish / Bearish triggers. - Default Green and Red Triangles (Bullish / Bearish) default to having the same triggering condition as the Entry it corresponds to. This is to highlight either a pyramiding concept, early exit, or you can change to account for other things occurring during your trades which could help you with Stop and Target management/considerations. TradingView and many of its community members have done a lot for me, so this is my attempt to give back.
Editors' picks
Pine Script™ indicator
by carnagecain
128
Strat Magnitude LinesHave you ever wished you could easily see the daily magnitude line of a Strat Combo while on a smaller timeframe intraday chart? This indicator allows you to do that and much more! Description This indicator does two simple things, but it does them very well. The first thing it does is draw a small horizontal line at the magnitude level of a Strat Setup (a potential Strat Combo before the last candle has formed) on the daily chart. This is intended to help the user easy ascertain how much magnitude distance (distance between trigger line and magnitude line) of a potential Strat Combo the night before when the user is searching for trades to play the next trading day. If the last two candles on a daily chart form the first two bars of a Strat Combo, then this indicator display a horizontal line where the ultimate magnitude would be if the next trading day a Strat Combo was formed. This helps the trader gauge whether there is sufficient magnitude that makes it worth it to even consider trading the next day. The second and most important thing this indicator does is display the daily magnitude line while the user is in a smaller timeframe managing their trade. This helps the user have an easily identifiable line to show where to take full or partial profit at. There is no need to keep track of manually drawn lines or the hassle of letting your charts get cluttered with lines that the user forgot to delete. This indicator finds potential Strat Combos (aka Strat Setups) and dynamically draws horizontal lines for the user and removes them when they are no longer in use. The user can focus on taking profit and making money and leave the hassle to the indicator. Inputs & Style All four lines (two daily lines and two intraday lines) can be independently configured. Each lines color, line style, and width can be adjusted. To turn “off” a line change the opacity to 0%. Automatic daily magnitude line on intraday chart
Pine Script™ indicator
by Infinity_Trading_
4
Moving Average LinesDescription This indicator combines three daily moving average lines and one intraday moving average lines into one convenient indicator. If you routinely use moving average lines on your charts this indicator will reduce indicator clutter, allow you to add more indicators, and provide one central location for all of your moving average settings. The default length for the intraday moving average is 9. The defaults for the daily moving averages are 20, 50, and 200. Lower Timeframes This indicator also includes a very unique feature that displays the daily moving average lines onto lower timeframes. This is very useful for seeing if price will reverse off a daily moving average line while watching on a lower timeframe. Displaying daily moving averages on lower timeframes is controlled by an on/ff switch in the settings. So the user can use this feature only when it is convenient for them. The default for displaying daily moving averages on lower timeframes is OFF. Inputs & Style Everything in this indicator can be independently configured. Each of the moving average lines can be toggle on or off. The length of each moving average lines can be adjusted. There are four mathematical functions that can be chosen for the moving average equations. And the colors and line style can be independently configured to fit your current charts style.
Pine Script™ indicator
by Infinity_Trading_
5
Indicator Visualizer V1.0This is a script so that you can visualize crossover/under indicators on the chart as zones/boxes or as lines. By default the source is "Close". When the source is Close and the default RSI is checked, then the indicator will visualize crossover and under from a 14 period RSI as shown in the published chart. How this indicator works: Add the indicator you want to visualize to the chart, and this indicator. Open this indicator and set the source to the indicator you want to visualize, then set the levels you want to visualize the crossovers for. Using the default as an example When the RSI crosses above level 1 (default 70) then it will begin plotting a "Cross Over" box. Each bar that the RSI remains above level 1 it will adjust the top of the box and the right side of the box. When RSI crosses back below level 1 then the box will stop adjusting and end on that bar. Using the default as an example When the RSI crosses below level 2 (default 30) then it will begin plotting a "Cross Under" box. Each bar that the RSI remains below level 2 it will adjust the bottom of the box and the right side of the box. When RSI crosses back above level 2 then the box will stop adjusting and end on that bar. If you want to use lines they will be drawn from the close of the starting bar to the close of the current/end bar. You are able to set an extension for the lines if you would like them to extend a specific amount past the close bar. (I.E. 1,2,or 3 bars) If you wish to use the source as close, then you must uncheck the Default RSI box.
Pine Script™ indicator
by Exmodaus
1