Get started

Momentumstrategy

Momentum Explosion 2CCI RSI"Momentum Explosion Template for Mobile Metatrader", that is a trading system trend momentum based on two Commodity Channel Index (CCI) , RSI and two Moving Averages.The trading signals are generated by the crossing of the moving averages confirmed by the agreement of the two CCIs and the RSI. Two Moving averages Filtered by double CCI and RSI Credit is to Dimitri Author Beejay (Forex Factory) Trading Rules Momentum Explosion Buy EMA 8 crosses upward SMA 26. CCI 34 periods > 0 CCI 55 periods > 0 RSI 26 > 48. Sell EMA 8 crosses downward SMA 26. CCI 34 periods < 0 CCI 55 periods < 0 RSI 26 < 48.
Pine Script™ strategy
by capam
Ichimoku Clouds with Trend IdentificationThis is another version of the Ichimoku Clouds indicator where I have added logic to evaluate the current chart as either Bullish, Bearish, or Mixed, depending on 4 factors: 1. Is the price above/below the cloud? 2. Is the conversion line above/below the base line? 3. Is the lagging span above/below the cloud? 4. Is the rightmost cloud green/red? If all conditions point the same direction, then the chart will be labelled "Bullish" or "Bearish". Otherwise it will be labelled "Mixed".
Pine Script™ indicator
by ragnarok628
5
Ichimoku Cloud LONG and SHORT indicatorsThis simple script uses 4 rules from Ichimoku Cloud indicator to marks position entry points. The idea is that by entering a long position just when these 4 criteria are met, you can capture a 2-3% plus move within the next few days: 1. The conversion line is above the base line 2. The price is above the clouds 3. The lagging span is above the clouds 4. The rightmost cloud is green The same 4 criteria but inverted will indicate a short entry. In order to avoid 'stale' entries which can lead to chasing, we want the price and conversion line crossovers to be recent, within the past few days. Ideally we want to enter before close on the day the entry signal is given so that we can capture any potential gap up (or down if short). Often the price will make a nice move the next day or day after. If any of the criteria become invalidated, or if after 4-5 days there hasn't been significant movement, then it was a false alarm. This script will show the basic Ichimoku Cloud indicators, plus labels for bearish and bullish price and conversion line crossovers as well as LONG and SHOT indicators to show when the entry criteria have been met.
Pine Script™ indicator
by ragnarok628
14
Ruckard TradingLatinoThis strategy tries to mimic TradingLatino strategy. The current implementation is beta. Si hablas castellano o espanyol por favor consulta MENSAJE EN CASTELLANO más abajo. It's aimed at BTCUSDT pair and 4h timeframe. STRATEGY DEFAULT SETTINGS EXPLANATION max_bars_back=5000 : This is a random number of bars so that the strategy test lasts for one or two years calc_on_order_fills=false : To wait for the 4h closing is too much. Try to check if it's worth entering a position after closing one. I finally decided not to recheck if it's worth entering after an order is closed. So it is false. calc_on_every_tick=false pyramiding=0 : We only want one entry allowed in the same direction. And we don't want the order to scale by error. initial_capital=1000 : These are 1000 USDT. By using 1% maximum loss per trade and 7% as a default stop loss by using 1000 USDT at 12000 USDT per BTC price you would entry with around 142 USDT which are converted into: 0.010 BTC . The maximum number of decimal for contracts on this BTCUSDT market is 3 decimals. E.g. the minimum might be: 0.001 BTC . So, this minimal 1000 amount ensures us not to entry with less than 0.001 entries which might have happened when using 100 USDT as an initial capital. slippage=1 : Binance BTCUSDT mintick is: 0.01. Binance slippage: 0.1 % (Let's assume). TV has an integer slippage. It does not have a percentage based slippage. If we assume a 1000 initial capital, the recommended equity is 142 which at 11996 USDT per BTC price means: 0.011 BTC. The 0.1% slippage of: 0.011 BTC would be: 0.000011 . This is way smaller than the mintick. So our slippage is going to be 1. E.g. 1 (slippage) * 0.01 (mintick) commission_type=strategy.commission.percent and commission_value=0.1 : According to: binance . com / en / fee / schedule in VIP 0 level both maker and taker fees are: 0.1 %. BACKGROUND Jaime Merino is a well known Youtuber focused on crypto trading His channel TradingLatino features monday to friday videos where he explains his strategy. JAIME MERINO STANCE ON BOTS Jaime Merino stance on bots (taken from memory out of a 2020 June video from him): '~ You know. They can program you a bot and it might work. But, there are some special situations that the bot would not be able to handle. And, I, as a human, I would handle it. And the bot wouldn't do it. ~' My long term target with this strategy script is add as many special situations as I can to the script so that it can match Jaime Merino behaviour even in non normal circumstances. My alternate target is learn Pine script and enjoy programming with it. WARNING This script might be bigger than other TradingView scripts. However, please, do not be confused because the current status is beta. This script has not been tested with real money. This is NOT an official strategy from Jaime Merino. This is NOT an official strategy from TradingLatino . net . HOW IT WORKS It basically uses ADX slope and LazyBear's Squeeze Momentum Indicator to make its buy and sell decisions. Fast paced EMA being bigger than slow paced EMA (on higher timeframe) advices going long. Fast paced EMA being smaller than slow paced EMA (on higher timeframe) advices going short. It finally add many substrats that TradingLatino uses. SETTINGS __ SETTINGS - Basics ____ SETTINGS - Basics - ADX (ADX) Smoothing {14} (ADX) DI Length {14} (ADX) key level {23} ____ SETTINGS - Basics - LazyBear Squeeze Momentum (SQZMOM) BB Length {20} (SQZMOM) BB MultFactor {2.0} (SQZMOM) KC Length {20} (SQZMOM) KC MultFactor {1.5} (SQZMOM) Use TrueRange (KC) {True} ____ SETTINGS - Basics - EMAs (EMAS) EMA10 - Length {10} (EMAS) EMA10 - Source {close} (EMAS) EMA55 - Length {55} (EMAS) EMA55 - Source {close} ____ SETTINGS - Volume Profile Lowest and highest VPoC from last three days is used to know if an entry has a support VPVR of last 100 4h bars is also taken into account (VP) Use number of bars (not VP timeframe): Uses 'Number of bars {100}' setting instead of 'Volume Profile timeframe' setting for calculating session VPoC (VP) Show tick difference from current price {False}: BETA . Might be useful for actions some day. (VP) Number of bars {100}: If 'Use number of bars (not VP timeframe)' is turned on this setting is used to calculate session VPoC. (VP) Volume Profile timeframe {1 day}: If 'Use number of bars (not VP timeframe)' is turned off this setting is used to calculate session VPoC. (VP) Row width multiplier {0.6}: Adjust how the extra Volume Profile bars are shown in the chart. (VP) Resistances prices number of decimal digits : Round Volume Profile bars label numbers so that they don't have so many decimals. (VP) Number of bars for bottom VPOC {18}: 18 bars equals 3 days in suggested timeframe of 4 hours. It's used to calculate lowest session VPoC from previous three days. It's also used as a top VPOC for sells. (VP) Ignore VPOC bottom advice on long {False}: If turned on it ignores bottom VPOC (or top VPOC on sells) when evaluating if a buy entry is worth it. (VP) Number of bars for VPVR VPOC {100}: Number of bars to calculate the VPVR VPoC. We use 100 as Jaime once used. When the price bounces back to the EMA55 it might just bounce to this VPVR VPoC if its price it's lower than the EMA55 (Sells have inverse algorithm). ____ SETTINGS - ADX Slope ADX Slope help us to understand if ADX has a positive slope, negative slope or it is rather still. (ADXSLOPE) ADX cut {23}: If ADX value is greater than this cut (23) then ADX has strength (ADXSLOPE) ADX minimum steepness entry {45}: ADX slope needs to be 45 degrees to be considered as a positive one. (ADXSLOPE) ADX minimum steepness exit {45}: ADX slope needs to be -45 degrees to be considered as a negative one. (ADXSLOPE) ADX steepness periods {3}: In order to avoid false detection the slope is calculated along 3 periods. ____ SETTINGS - Next to EMA55 (NEXTEMA55) EMA10 to EMA55 bounce back percentage {80}: EMA10 might bounce back to EMA55 or maybe to 80% of its complete way to EMA55 (NEXTEMA55) Next to EMA55 percentage {15}: How much next to the EMA55 you need to be to consider it's going to bounce back upwards again. ____ SETTINGS - Stop Loss and Take Profit You can set a default stop loss or a default take profit. (STOPTAKE) Stop Loss % {7.0} (STOPTAKE) Take Profit % {2.0} ____ SETTINGS - Trailing Take Profit You can customize the default trailing take profit values (TRAILING) Trailing Take Profit (%) {1.0}: Trailing take profit offset in percentage (TRAILING) Trailing Take Profit Trigger (%) {2.0}: When 2.0% of benefit is reached then activate the trailing take profit. ____ SETTINGS - MAIN TURN ON/OFF OPTIONS (EMAS) Ignore advice based on emas {false}. (EMAS) Ignore advice based on emas (On closing long signal) {False}: Ignore advice based on emas but only when deciding to close a buy entry. (SQZMOM) Ignore advice based on SQZMOM {false}: Ignores advice based on SQZMOM indicator. (ADXSLOPE) Ignore advice based on ADX positive slope {false} (ADXSLOPE) Ignore advice based on ADX cut (23) {true} (STOPTAKE) Take Profit? {false}: Enables simple Take Profit. (STOPTAKE) Stop Loss? {True}: Enables simple Stop Loss. (TRAILING) Enable Trailing Take Profit (%) {True}: Enables Trailing Take Profit. ____ SETTINGS - Strategy mode (STRAT) Type Strategy: 'Long and Short', 'Long Only' or 'Short Only'. Default: 'Long and Short'. ____ SETTINGS - Risk Management (RISKM) Risk Management Type: 'Safe', 'Somewhat safe compound' or 'Unsafe compound'. ' Safe ': Calculations are always done with the initial capital (1000) in mind. The maximum losses per trade/day/week/month are taken into account. ' Somewhat safe compound ': Calculations are done with initial capital (1000) or a higher capital if it increases. The maximum losses per trade/day/week/month are taken into account. ' Unsafe compound ': In each order all the current capital is gambled and only the default stop loss per order is taken into account. That means that the maximum losses per trade/day/week/month are not taken into account. Default : 'Somewhat safe compound'. (RISKM) Maximum loss per trade % {1.0}. (RISKM) Maximum loss per day % {6.0}. (RISKM) Maximum loss per week % {8.0}. (RISKM) Maximum loss per month % {10.0}. ____ SETTINGS - Decimals (DECIMAL) Maximum number of decimal for contracts {3}: How small (3 decimals means 0.001) an entry position might be in your exchange. EXTRA 1 - PRICE IS IN RANGE indicator (PRANGE) Print price is in range {False}: Enable a bottom label that indicates if the price is in range or not. (PRANGE) Price range periods {5}: How many previous periods are used to calculate the medians (PRANGE) Price range maximum desviation (%) {0.6} ( > 0 ): Maximum positive desviation for range detection (PRANGE) Price range minimum desviation (%) {0.6} ( > 0 ): Mininum negative desviation for range detection EXTRA 2 - SQUEEZE MOMENTUM Desviation indicator (SQZDIVER) Show degrees {False}: Show degrees of each Squeeze Momentum Divergence lines to the x-axis. (SQZDIVER) Show desviation labels {False}: Whether to show or not desviation labels for the Squeeze Momentum Divergences. (SQZDIVER) Show desviation lines {False}: Whether to show or not desviation lines for the Squeeze Momentum Divergences. EXTRA 3 - VOLUME PROFILE indicator WARNING: This indicator works not on current bar but on previous bar. So in the worst case it might be VP from 4 hours ago. Don't worry, inside the strategy calculus the correct values are used. It's just that I cannot show the most recent one in the chart. (VP) Print recent profile {False}: Show Volume Profile indicator (VP) Avoid label price overlaps {False}: Avoid label prices to overlap on the chart. EXTRA 4 - ZIGNALY SUPPORT (ZIG) Zignaly Alert Type {Email}: 'Email', 'Webhook'. ' Email ': Prepare alert_message variable content to be compatible with zignaly expected email content format. ' Webhook ': Prepare alert_message variable content to be compatible with zignaly expected json content format. EXTRA 5 - DEBUG (DEBUG) Enable debug on order comments {False}: If set to true it prepares the order message to match the alert_message variable. It makes easier to debug what would have been sent by email or webhook on each of the times an order is triggered. HOW TO USE THIS STRATEGY BOT MODE: This is the default setting. PROPER VOLUME PROFILE VIEWING: Click on this strategy settings. Properties tab. Make sure Recalculate 'each time the order was run' is turned off. NEWBIE USER: (Check PROPER VOLUME PROFILE VIEWING above!) You might want to turn on the 'Print recent profile {False}' setting. Alternatively you can use my alternate realtime study: 'Resistances and supports based on simplified Volume Profile' but, be aware, it might consume one indicator. ADVANCED USER 1: Turn on the 'Print price is in range {False}' setting and help us to debug this subindicator. Also help us to figure out how to include this value in the strategy. ADVANCED USER 2: Turn on the all the (SQZDIVER) settings and help us to figure out how to include this value in the strategy. ADVANCED USER 3: (Check PROPER VOLUME PROFILE VIEWING above!) Turn on the 'Print recent profile {False}' setting and report any problem with it. JAIME MERINO: Just use the indicator as it comes by default. It should only show BUY signals, SELL signals and their associated closing signals. From time to time you might want to check 'ADVANCED USER 2' instructions to check that there's actually a divergence. Check also 'ADVANCED USER 1' instructions for your amusement. EXTRA ADVICE It's advised that you use this strategy in addition to these two other indicators: * Squeeze Momentum Indicator * ADX so that your chart matches as close as possible to TradingLatino chart. ZIGNALY INTEGRATION This strategy supports Zignaly email integration by default. It also supports Zignaly Webhook integration. ZIGNALY INTEGRATION - Email integration example What you would write in your alert message: ||{{strategy.order.alert_message}}||key=MYSECRETKEY|| ZIGNALY INTEGRATION - Webhook integration example What you would write in your alert message: { {{strategy.order.alert_message}} , "key" : "MYSECRETKEY" } CREDITS I have reused and adapted some code from 'Directional Movement Index + ADX & Keylevel Support' study which it's from TradingView console user. I have reused and adapted some code from '3ema' study which it's from TradingView hunganhnguyen1193 user. I have reused and adapted some code from 'Squeeze Momentum Indicator ' study which it's from TradingView LazyBear user. I have reused and adapted some code from 'Strategy Tester EMA-SMA-RSI-MACD' study which it's from TradingView fikira user. I have reused and adapted some code from 'Support Resistance MTF' study which it's from TradingView LonesomeTheBlue user. I have reused and adapted some code from 'TF Segmented Linear Regression' study which it's from TradingView alexgrover user. I have reused and adapted some code from "Poor man's volume profile" study which it's from TradingView IldarAkhmetgaleev user. FEEDBACK Please check the strategy source code for more detailed information where, among others, I explain all of the substrats and if they are implemented or not. Q1. Did I understand wrong any of the Jaime substrats (which I have implemented)? Q2. The strategy yields quite profit when we should long (EMA10 from 1d timeframe is higher than EMA55 from 1d timeframe. Why the strategy yields much less profit when we should short (EMA10 from 1d timeframe is lower than EMA55 from 1d timeframe)? Any idea if you need to do something else rather than just reverse what Jaime does when longing? FREQUENTLY ASKED QUESTIONS FAQ1. Why are you giving this strategy for free? TradingLatino and his fellow enthusiasts taught me this strategy. Now I'm giving back to them. FAQ2. Seriously! Why are you giving this strategy for free? I'm confident his strategy might be improved a lot. By keeping it to myself I would avoid other people contributions to improve it. Now that everyone can contribute this is a win-win. FAQ3. How can I connect this strategy to my Exchange account? It seems that you can attach alerts to strategies. You might want to combine it with a paying account which enable Webhook URLs to work. I don't know how all of this works right now so I cannot give you advice on it. You will have to do your own research on this subject. But, be careful. Automating trades, if not done properly, might end on you automating losses. FAQ4. I have just found that this strategy by default gives more than 3.97% of 'maximum series of losses'. That's unacceptable according to my risk management policy. You might want to reduce default stop loss setting from 7% to something like 5% till you are ok with the 'maximum series of losses'. FAQ5. Where can I learn more about your work on this strategy? Check the source code. You might find unused strategies. Either because there's not a substantial increases on earnings. Or maybe because they have not been implemented yet. FAQ6. How much leverage is applied in this strategy? No leverage. FAQ7. Any difference with original Jaime Merino strategy? Most of the times Jaime defines an stop loss at the price entry. That's not the case here. The default stop loss is 7% (but, don't be confused it only means losing 1% of your investment thanks to risk management). There's also a trailing take profit that triggers at 2% profit with a 1% trailing. FAQ8. Why this strategy return is so small? The strategy should be improved a lot. And, well, backtesting in this platform is not guaranteed to return theoric results comparable to real-life returns. That's why I'm personally forward testing this strategy to verify it. MENSAJE EN CASTELLANO En primer lugar se agradece feedback para mejorar la estrategia. Si eres un usuario avanzado y quieres colaborar en mejorar el script no dudes en comentar abajo. Ten en cuenta que aunque toda esta descripción tenga que estar en inglés no es obligatorio que el comentario esté en inglés. CHISTE - CASTELLANO ¡Pero Jaime! ¡400.000! ¡Tu da mun!
Pine Script™ strategy
by ruckard
28
Trend MeterUse as a supplementary Indicator to confirm your entries, but it is as good on it's own. When you first apply the indicator to your chart make sure you shrink it down It looks a lot better that way The indicator consists of 3 different Trend Meters and a Trend Bar which are used to confirm trend As a bonus Possible Momentum Setup entries based on Stochastics are marked as well, these are very Powerful however please use with caution How to Use The more Trend meters are lit up the better Look for Support or Resistance Levels for price to be attracted to Find confluence with other indicators Enter Long above the Setup Bar Enter Short Below the Setup Bar
Pine Script™ indicator
by Lij_MC
193
Multi MA Ribbon +Draws an MA Ribbon that highlights major MA's and for easier visibility separates them into different groups including Custom MA's, Baseline MA's, T Line MA's, Short Term MA's and Long Term MA's. Choose between 11 different types of MA's thanks to JustUncleL and John F. Ehlers super smoother. The + is for various signals and alerts derived from Market Cipher / Wave Trend indicators and TCG etc. Happy Trading and remember just follow the flow of the river!
Pine Script™ indicator
by Lij_MC
11
MACD MOMENTUM STRATEGYHey, First of I'm not so familiar with Pine Editor, yet. But a do need some help with a trick thing I*ve been working on. As you can see I*ve merge the MACD and the MOMENTUM indicators in the same "chart" this have been working pretty well for me as a trading strategy. But now a chat tho create a real strategy with Pine Editor based on the same data. The thing is that I can't seem tho get the MOMENTUM indicator to and the MACD indicator in the same (different) scale in my strategy as when I merge them. I suspect this got something to do with my chose of source för the MOMENTUM indicator, but I'm not 100. I would be grateful for all kinds of feedback and tips for a solutions on this. Thanks.
Pine Script™ strategy
by Sebastiansj
1
Double Stochastic DivergenceSame as my protected script but you can now see the code This Study plots divergences and overlays a second %K as a fractal and changes the color of %D for the non fractal Option to use Stochastic RSI for Fractal Background Shading according to trend Feel Free to change the indicator values to suit your style / system The divergence script is thanks to @RicardoSantos, I've just adjusted it to suite my indicator Remember that divergences work best when traded with the trend or very late in a trend when going against the trend Common value for %K is 5, I have chosen 3 as it gives faster entries when using multiple time frames If you are not using a momentum indicator as a trailing stop and using only cycle indicator then I would recommended %K be 4 for exits
Pine Script™ indicator
by Lij_MC
Edge of MomentumThe script was designed for the purpose of catching the rocket portion of a move (the edge of momentum). Long --When RSI closes over 60, take long order 1 tick above that bar. The closed bar above RSI 60 will be colored "green" or whatever color the user chooses. (RSI > 60) --On a long position, exit will be a closed bar below the ema (low, 10) . The closed bar below the ema will be colored "yellow." (Price < ema) --Note: On a long position there is no need to exit when a closed bar is colored "purple." RSI is just below 60 but above 40. Pullback or chop Short --When RSI closes below 40, take a short order 1 tick below that bar. The closed bar below RSI 40 will be colored "red." RSI<40) --On a short position, exit will be a closed bar above the ema (low, 10). The closed bar above the ema will be colored "purple." (Price > ema) --Note: On a short position there is no need to exit when a closed bar is colored "yellow." Note: You may see a series of purple and yellow bars, that is simply chop. I define chop as RSI moving between 60 and 40. Trade should only be taken above green colored candle(long) and below red colored candle (short). No position should be taken off yellow or purple candle (chop) Again this is designed to catch the momentum part of a move, and to help reduce some entries during chop. It is a simple systems that beginning traders can use and profit from. Note: I don't no shit about coding scripts I just learn from reading others. Enjoy. If you decide to use please drop me a line...suggestions/comments, etc. Best of luck in all you do.
Pine Script™ indicator
by NYBKLYN
9