Get started

Multi

Flying Dragon Trend IndicatorFlying Dragon Trend Indicator can be used to indicate the trend on all timeframes by finetuning the input settings. The Flying Dragon Trend family includes both the strategy and the indicator, where the strategy supports of selecting the optimal set of inputs for the indicator in each scenario. Highly recommended to get familiar with the strategy first to get the best out of the indicator. Flying Dragon Trend plots the trend bands into the ribbon, where the colours indicate the trend of each band. The plotting of the bands can be turned off in the input settings. Based on the user selectable Risk Level the trend pivot indicator is shown for the possible trend pivot when the price crosses the certain moving average line, or at the Lowest risk level all the bands have the same colour. The trend pivot indicator is not shown on the Lowest risk level, but the colour of the trend bands is the indicator instead . The main idea is to combine two different moving averages to cross each other at the possible trend pivot point, but trying to avoid any short term bounces to affect the trend indication. The ingenuity resides in the combination of selected moving average types, lengths and especially the offsets. The trend bands give visual hint for the user while observing the price interaction with the bands, one could say that when "the Dragon swallows the candles the jaws wide open", then there is high possibility for the pivot. The leading moving average should be fast while the lagging moving average should be, well, lagging behind the leading one. There is Offset selections for each moving average, three for leading one and one for the lagging one, those are where the magic happens. After user has selected preferred moving average types and lengths, by tuning each offset the optimal sweet spot for each timeframe and equity will be found. The default values are good enough starting points for longer (4h and up) timeframes, but shorter timeframes (minutes to hours) require different combination of settings, some hints are provided in tooltips. Basically the slower the "leading" moving average (like HMA75 or HMA115) and quicker the "lagging" moving average (like SMA12 or SMA5) become, the better performance at the Lowest risk level on minute scales. This "reversed" approach at the minute scales is shown also as reversed colour for the "lagging" moving average trend band, which seems to make it work surprisingly well. The Flying Dragon Trend does not necessarily work well on zig zag and range bounce scenarios without additional finetuning of the input settings to fit the current condition.
Pine Script™ indicator
by MarkoP010
9
Flying Dragon Trend StrategyFlying Dragon Trend Strategy can be used to indicate the trend on all timeframes by finetuning the input settings. The Flying Dragon Trend family includes both the strategy and the indicator, where the strategy supports of selecting the optimal set of inputs for the indicator in each scenario. Highly recommended to get familiar with the strategy first to get the best out of the indicator. Flying Dragon Trend plots the trend bands into the ribbon, where the colours indicate the trend of each band. The plotting of the bands can be turned off in the input settings. Based on the user selectable Risk Level the strategy is executed when the price crosses the certain moving average line, or at the Lowest risk level all the bands have the same colour. The main idea is to combine two different moving averages to cross each other at the possible trend pivot point, but trying to avoid any short term bounces to affect the trend indication. The ingenuity resides in the combination of selected moving average types, lengths and especially the offsets. The trend bands give visual hint for the user while observing the price interaction with the bands, one could say that when "the Dragon swallows the candles the jaws wide open", then there is high possibility for the pivot. The leading moving average should be fast while the lagging moving average should be, well, lagging behind the leading one. There is Offset selections for each moving average, three for leading one and one for the lagging one, those are where the magic happens. After user has selected preferred moving average types and lengths, by tuning each offset the optimal sweet spot for each timeframe and equity will be found. The default values are good enough starting points for longer (4h and up) timeframes, but shorter timeframes (minutes to hours) require different combination of settings, some hints are provided in tooltips. Basically the slower the "leading" moving average (like HMA75 or HMA115) and quicker the "lagging" moving average (like SMA12 or SMA5) become, the better performance at the Lowest risk level on minute scales. This "reversed" approach at the minute scales is shown also as reversed colour for the "lagging" moving average trend band, which seems to make it work surprisingly well. The Flying Dragon Trend does not necessarily work well on zig zag and range bounce scenarios without additional finetuning of the input settings to fit the current condition. Strategy direction selector by DashTrader.
Pine Script™ strategy
by MarkoP010
9
Multi SMI Ergodic OscillatorThe Multi SMI Ergodic Oscillator (Multi SMIEO) indicator can be used to identify potential buy and sell signals based on the relationship between the TSI and EMA lines. The script is creating an indicator that plots multiple (3) sets of Time Series Indicator (TSI-Indicator) and Exponential Moving Average (EMA-Signal) lines as a single indicator. The TSI is a momentum oscillator that helps identify overbought and oversold conditions. It is calculated using the close prices of an asset, a short-term moving average, and a long-term moving average. The script uses three different pairs of input values for the short-term and long-term periods, which can be adjusted by the user. The EMA is a type of moving average that gives more weight to recent prices. It is calculated by applying a weighting factor to the most recent price, and then adding that weighted value to the previous EMA value. The script uses three different input values for the length of the EMA, which can also be adjusted by the user. After calculating the TSI and EMA for each set, the script plots them on the same graph, with different colors and widths to differentiate them. The three sets of TSI and EMA lines are plotted to allow the user to compare the results of different periods. The script also plots a horizontal line at zero, which is used as a reference point for the oscillations of the indicator lines. One way to use this indicator is to look for crossovers between the TSI and the EMA lines. A bullish crossover occurs when the TSI crosses above the EMA. This suggests that the buying pressure is increasing and a potential buy signal is generated. A bearish crossover occurs when the TSI crosses below the EMA. This suggests that the selling pressure is increasing and a potential sell signal is generated. Some other ways that the indicator can be used include: 1. Identifying trends: The TSI and EMA lines can be used to identify the direction of the trend. An uptrend is present when the TSI and EMA lines are both trending upwards, while a downtrend is present when the TSI and EMA lines are both trending downwards. 2. Overbought and oversold conditions: The TSI can be used to identify overbought and oversold conditions. When the TSI is above the upper limit of the range, the asset is considered overbought and may be due for a price correction. Conversely, when the TSI is below the lower limit of the range, the asset is considered oversold and may be due for a price rebound. 3. Confirming price action: The Multi SMIEO indicator can be used to confirm price action. If a bullish divergence is present, it confirms a potential bullish reversal. If a bearish divergence is present, it confirms a potential bearish reversal. 4. Multiple time frame analysis: By using different periods for the TSI and EMA lines, the indicator can be used to analyze the asset on multiple time frames. It can be useful to compare the results of different periods to get a better understanding of the asset's price movements. 5. Risk management: This indicator can be used as an element of risk management strategy, it can help traders to identify overbought and oversold conditions to set stop loss or take profit levels. The Multi SMI Ergodic Oscillator (Multi SMIEO) is a versatile indicator that can be used in a number of ways to analyze the price movements of an asset. It can be used to identify potential buy and sell signals, trends, overbought and oversold conditions, and to confirm price action. By using different periods for the TSI and EMA lines, the indicator can also be used to analyze the asset on multiple time frames. However, it is important to remember that indicators are based on historical data, and past performance does not guarantee future results. It is important to use the indicator as part of a comprehensive trading strategy that includes risk management and other analysis techniques, such as fundamental and technical analysis. It is also important to keep in mind that indicators are not a standalone solution for trading, they should be used in conjunction with other market analysis and research techniques to generate better results. Lastly, it is important to keep in mind that trading in financial markets comes with a certain level of risk and it is crucial to always have a proper risk management plan in place. Never invest more than you can afford to lose.
Pine Script™ indicator
by Jake_from_State_Farm
2
Channels Strategy [Dimkud]Channels trading Strategy. Based on "Channels Strategy" by JoseMetal. To the original strategy added additional options and filters : Static SL/TP in percents (%), time delay between orders, ATR Filter, second Keltner Channel (Multi TimeFrame). Interface translated to English. Were good backtest results on many crypto tokens on 15m - 45m - 1h periods. Mostly with configuration: Keltner Channel (optimise parameters for every token) + Static SL/TP (optimise values for every token) + "Enter Condition" = "Wick out of band". The better is to optimise paramaters separately for Short and Long trading. And run two separate bots (in settings enable only Long or only Short.) Tested on real automated trading on few online bot platforms. (3comm, revenuebot, veles). Later I will make tutorial how to connect strategy to these platforms or contact me if you need help.
Pine Script™ strategy
by dimkud
7
Multi IND Dashboard [Skiploss]Multi IND Dashboard is dashboard combine with price change, RSI, ATR, Alligator and Supertrend. With a maximum of 10 timeframes, I think it's going to make your life easier. In looking at the momentum of each chart. How it work?? Change : It is the distance from the close price of previous candlestick and shows the movement value of the candlestick in that timeframe. RSI : Default setting are 14 and source close Value >= 75 : Fill text color maximum overbought Value >= 65 : Fill text color medium overbought Value >= 55 : Fill text color minimum overbought Value >= 45 : Fill text color minimum overbought Value >= 35 : Fill text color medium overbought Value >= 25 : Fill text color maximum overbought ATR : Default setting are 14 length and RMA smoothing, It like the average swing of the candlesticks. Alligator : Default setting are 13, 8 and 5 Bullish status is value lips > teeth and teeth > jaw Bearish status is value lips < teeth and teeth < jaw Neutral status status is value lips > teeth and teeth < jaw or lips < teeth and teeth > jaw Supertrend : Default setting are 8 and 3.0 Bullish status is uptrend Bearish status is downtrend
Pine Script™ indicator
by Skiploss
Multi-Timeframe MA Based Zigzag[liwei666]🎲 Overview 🎯 This Zigzag indicator build based on different MA such as EMA/HMA/RMA/SMA, support multi-timeframe setting . you can get customer zigzag indicator by change short/long ma length and high-timeframe config(5m/15m/30m/1h/2h) in any symbol. 🎲 Indicator design logic 🎯 entired logic is simple and code looks complex, I‘ll explain core logic here, code already equipped with detailed comments. 1. use close-in EMA's highest/lowest value mark as SWING High/Low when EMA crossover/under, not use func ta.pivothigh()/ta.pivotlow() 2. when EMA crossover/under plot a char as signal like ●/❄/▲, crossover get blue char crossunder get red char 3. latest zigzag line is not drawn until EMA is turned (crossover/under), but signal is realtime 4. you can see diff zigzag structure when you open high-timeframe config, then find regular pattern benefit your trading. 🎲 Settings 🎯 there are 3 group properties in script, just focus on 5 properties in 'GRP1' , 'GRP2' and 'GRP3' are display config. 'GRP1': MA_Type: MA type you can choose(EMA/RMA/SMA/HMA/WMA), default is EMA short_ma_len: short MA length of your current timeframe on chart long_ma_len: long MA length of your current timeframe on chart htf_ma_len: MA length of high timeframe, MA type same as 'MA_Type' config htf_ma_tf: high timeframe ma length, 15/30/60/120 minute 'GRP2': • show_short_zz • show_long_zz  • show_htf_zz: 'GRP3': • show_short_ma_line • show_short_ma_signal • show_long_ma_line • show_long_ma_signal • show_htf_ma_line • show_htf_ma_signal 🎲 Usage 🎯 As we know, MA based signal usually worked fine in trend market , low volatility is unprofitable. 🎯 One of pattern as the chart show below. 1. success example : after a blue ▲ signal, entry long when blue ● signal appear, marked with green box. 2. failed example: after a blue ▲ signal, a red ▼ signal appear, marked with white box. 🎯 BoS(Break of Structure) based on ma zigzag is a good idea I'm implementing, it will be published in next script. Additionally, I plan to publish 20 profitable strategies in 2023; this indicatior not one of them, let‘s witness it together! Hope this indicator will be useful for you :) enjoy! 🚀🚀🚀
Pine Script™ indicator
by liwei666
2
Stoch RSI 15 min - multi time frame tableABOUT THIS INDICATOR This indicator calculates the Stochastic RSI for the time frames 15 min, 30 min, 1h, 4h, and 12h. However, the 15 min time frame should always be the default time frame for your chart. IMPORTANT * NOTE! It's extremely important that the chosen time frame for your chart is 15 min. Otherwise the Stochastic RSI for the longer time frames won’t be correctly calculated. * Stochastic RSI will be calculated and displayed in a table for the time frames: 15 min, 30 min, 1h, 4h, 12h. * All time frames are based on closed bars except the "15minR" that are realtime updated values calculated on a 15 min time frame. ABOUT STOCHASTIC RSI The Stochastic RSI (StochRSI) is a momentum indicator that ranges between 0 and 100. A Stochastic RSI value above 80 is considered overbought and below 20 is considered oversold. By using different time frames you can get a better idea of what direction the trade could take in a "longer" perspective. SETTINGS 1.) Length RSI = 14 (default period) 2.) Smoothing parameter of Stochastic RSI (Length Moving Average = 3) . Moving average of stochastic RSI * By default the displayed Stochastic RSI values are smoothed values of the actual Stochastic RSI. The smoothnes is formed by a calculated moving average of with the length of 3 by default. If you want Stochastic RSI with a sharper signal (higher risk for "false alarms" being more sensitive) change the Length Moving Average to = 1 (no smoothness at all) You can see the selected "Length RSI" and "Length Moving Average" on top of the Stochastic RSI table. Next version of this script will be updated with more a more flexible solution for different time frames. * NOTE, Tradingview comes with a inbuilt Stochastic RSI. See the the chart below. The blue line in the Stochastic-RSI chart represents (K value = 3) the same value as the script calculate/display in the table.
Pine Script™ indicator
by TaTaTaCrypto
2
Multi-timeframe Harmonic PatternsHello friends. In recent months I have been busy with my academic research and haven't had much time to publish new scripts. To fill the gap of these months, I decided to publish the indicator Multi-timeframe Harmonic Patterns . Harmonic technical chart patterns can predict the next price trend and provide traders with clues to the price direction, which is one of the indicators widely used by professional traders. (1) Indicator description This indicator is built on ZigZag Multi Time Frame with Fibonacci Retracement@LonesomeTheBlue . Thanks to LonesomeTheBlue for contributing the awesome indicator The indicator supports 6 different timeframes , and 25 different harmonic patterns This indicator supports indicating key indicator prices: entry price, stop loss price, and two take profit prices (2) Key parameters timeframe resolution: The timeframe of the harmonic pattern pivot high/low source: Calculation method of high/low pivot points timeframe pivot period: Minimum period of high/low pivot points delay for confirmations: Wait for N candles to confirm the chart pattern bullish/bearish colors: Bullish/bearish pattern colors enable harmonic patterns: Enable current harmonic patterns show harmonic patterns: Show harmonic patterns found show trading prices of patterns: Show key prices of harmonic patterns (3) Supported Patterns: Gartlay Cypher Bat Deepcrab Crab Butterfly Shark 0-5 AB=CD 3-Drives Anti-Gartlay Anti-Cypher Anti-Bat Anti-Crab Anti-Butterfly Anti-Shark Black-Swan White-Swan Descending-Triangle Ascending-Triangle Symmetrical-Triangle Headers&Shoulders Inverse-Headers&Shoulders Double-Top Double-Bottom ———————————————————————————————————————— 各位朋友大家好。最近几个月我忙于自己的学术研究没有过多时间更新脚本。为弥补这几个月的空缺，我决定发布该 多时间周期的谐波指标 。谐波技术图表形态在一定程度上可以预测下一个价格走势，为交易者提供价格方向的线索，是广大专业交易人员广泛使用的指标之一。 (1) 指标说明 该指标建立于 ZigZag Multi Time Frame with Fibonacci Retracement@LonesomeTheBlue ，感谢LonesomeTheBlue贡献的出色指标 该指标支持 6种不同的时间周期 ，以及 25种不同的谐波形态 该指标支持指示关键的指标价格：入场价格、止损价格、以及两种止盈价格 (2) 关键参数 timeframe resolution: 谐波形态的时间周期 pivot high/low source: 高/低枢纽点的计算方式 timeframe pivot period: 高/低枢纽点的最小周期 delay for confirmations: 等待N个蜡烛以确认图表形态 bullish/bearish colors: 看涨/看跌的形态颜色 enable harmonic patterns: 使能当前的谐波形态 show harmonic patterns: 显示被发现的谐波形态 show trading prices of patterns: 显示谐波形态的关键价格 (3) 支持形态: Gartlay Cypher Bat Deepcrab Crab Butterfly Shark 0-5 AB=CD 3-Drives Anti-Gartlay Anti-Cypher Anti-Bat Anti-Crab Anti-Butterfly Anti-Shark Black-Swan White-Swan Descending-Triangle Ascending-Triangle Symmetrical-Triangle Headers&Shoulders Inverse-Headers&Shoulders Double-Top Double-Bottom
Pine Script™ indicator
by dandrideng
24
MTF CCI + Realtime DivergencesMulti-timeframe Commodity Channel Index (CCI) + Realtime Divergences + Alerts This version of the CCI includes the following features: - Optional 2x sets of triple-timeframe overbought and oversold signals with fully configurable timeframes and overbought and oversold thresholds, can indicate where 3 selected timeframes are all overbought or all oversold at the same time, with alert option. - Optional divergence lines drawn directly onto the oscillator in realtime, with alert options. - Configurable pivot periods to fine tune the divergences drawn in order to suit different trading styles and timeframes, including the ability to enable automatic adjustment of pivot period per chart timeframe. - Alternate timeframe feature allows you to configure the oscillator to use data from a different timeframe than the chart it is loaded on. - 'Hide oscillator' feature allows traders to hide the oscillator itself, leaving only the background colours indicating the overbought and oversold periods and/or MTF overbought and oversold confluences, as seen in the chart image. - Also includes standard configurable CCI options, including CCI length and source type. Defaults set to length 20, and hlc3 source type. - Optional Flip oscillator feature, allows users to flip the oscillator upside down, for use with Tradingviews 'Flip chart' feature (Alt+i), for the purpose of manually spotting divergences, where the trader has a strong natural bias in one direction, so that they can flip both the chart and the oscillator. - Optional 'Fade oscillator' feature, which will fade out all but the most recent period, reducing visual noise on the chart. While this version of the CCI has the ability to draw divergences in realtime along with related alerts so you can be notified as divergences occur without spending all day watching the charts, the main purpose of this indicator was to provide the triple-timeframe overbought and oversold confluence signals, in an attempt to add more confluence, weight and reliability to the single timeframe overbought and oversold states, commonly used for trade entry confluence. It's primary purpose is intended for scalping reversal trades on lower timeframes, typically between 1-15 minutes, which can be used in conjunction with the regular divergences the indicator can highlight. The triple timeframe overbought can often indicate near term reversals to the downside, with the triple timeframe oversold often indicating neartime reversals to the upside. The default timeframes for this confluence are set to check the 1m, 5m and 15m timeframes together, ideal for scalping the < 15 minute charts. The default settings for the MTF #1 timeframes (1m, 5m and 15m) are best used on a <5 minute chart. Its design and use case is based upon the original MTF Stoch RSI + Realtime Divergences found here . Commodity Channel Index (CCI) Investopedia has described the popular oscillator as follows: “The Commodity Channel Index​ (CCI) is a momentum-based oscillator used to help determine when an investment vehicle is reaching a condition of being overbought or oversold. Developed by Donald Lambert, this technical indicator assesses price trend direction and strength, allowing traders to determine if they want to enter or exit a trade, refrain from taking a trade, or add to an existing position. In this way, the indicator can be used to provide trade signals when it acts in a certain way.” You can read more about the CCI, its use cases and calculations here . How do traders use overbought and oversold levels in their trading? The oversold level, that is traditionally when the CCI is above the 100 level is typically interpreted as being 'overbought', and below the -100 level is typically considered 'oversold'. Traders will often use the CCI at an overbought level as a confluence for entry into a short position, and the CCI at an oversold level as a confluence for an entry into a long position. These levels do not mean that price will necessarily reverse at those levels in a reliable way, however. This is why this version of the CCI employs the triple timeframe overbought and oversold confluence, in an attempt to add a more confluence and reliability to this usage of the CCI. While traditionally, the overbought and oversold levels are below -100 for oversold, and above 100 for overbought, he default threshold settings of this indicator have been increased to provide fewer, stronger signals, especially suited to the low timeframes and highly volatile assets. What are divergences? Divergence is when the price of an asset is moving in the opposite direction of a technical indicator, such as an oscillator, or is moving contrary to other data. Divergence warns that the current price trend may be weakening, and in some cases may lead to the price changing direction. There are 4 main types of divergence, which are split into 2 categories; regular divergences and hidden divergences. Regular divergences indicate possible trend reversals, and hidden divergences indicate possible trend continuation. Regular bullish divergence: An indication of a potential trend reversal, from the current downtrend, to an uptrend. Regular bearish divergence: An indication of a potential trend reversal, from the current uptrend, to a downtrend. Hidden bullish divergence: An indication of a potential uptrend continuation. Hidden bearish divergence: An indication of a potential downtrend continuation. How do traders use divergences in their trading? A divergence is considered a leading indicator in technical analysis , meaning it has the ability to indicate a potential price move in the short term future. Hidden bullish and hidden bearish divergences, which indicate a potential continuation of the current trend are sometimes considered a good place for traders to begin, since trend continuation occurs more frequently than reversals, or trend changes. When trading regular bullish divergences and regular bearish divergences, which are indications of a trend reversal, the probability of it doing so may increase when these occur at a strong support or resistance level . A common mistake new traders make is to get into a regular divergence trade too early, assuming it will immediately reverse, but these can continue to form for some time before the trend eventually changes, by using forms of support or resistance as an added confluence, such as when price reaches a moving average, the success rate when trading these patterns may increase. Typically, traders will manually draw lines across the swing highs and swing lows of both the price chart and the oscillator to see whether they appear to present a divergence, this indicator will draw them for you, quickly and clearly, and can notify you when they occur. Setting alerts. With this indicator you can set alerts to notify you when any/all of the above types of divergences occur, on any chart timeframe you choose, and also when the triple timeframe overbought and oversold confluences occur. Configurable pivot period. You can adjust the default pivot period values to suit your prefered trading style and timeframe. If you like to trade a shorter time frame, lowering the default lookback values will make the divergences drawn more sensitive to short term price action. By default, this indicator has enabled the automatic adjustment of the pivot periods for 4 configurable timeframes, in a bid to optimise the divergences drawn when the indicator is loaded onto any of the 4 timeframes. These timeframes and the auto adjusted pivot periods on each of them can also be reconfigured within the settings menu. Disclaimer: This script includes code adapted from the Divergence for Many Indicators v4 by LonesomeTheBlue . With special thanks.
Pine Script™ indicator
by PHVNTOM_TRADER
3
Relative Strength Index (RSI) + Realtime DivergencesRelative Strength Index (RSI) + Realtime Divergences This version of the RSI indicator includes the following features: - Optional divergence lines drawn directly onto the oscillator in realtime. - Configurable alerts to notify you when divergences occur. - Configurable lookback periods to fine tune the divergences drawn in order to suit different trading styles and timeframes. - Background colouring option to indicate when the RSI oscillator has crossed above or below its centerline. - Alternate timeframe feature allows you to configure the oscillator to use data from a different timeframe than the chart it is loaded on. - Fadeout oscillator feature will fade out all but the most recent history, leaving your chart free of visual noise. - Flip oscillator feature can be used with the Tradingview 'Flip chart' feature (Alt+i) in order to flip both the chart and the oscillator, too. This feature is to help traders manually spot divergences that may have a strong natural bias in one direction. - Optional centerline and range bands. - Various optional moving average types, bollinger bands etc. This indicator adds additional features onto the standard RSI whose core calculations remain unchanged. Namely, the configurable option to automatically, quickly and clearly draw divergence lines onto the oscillator for you as they occur in realtime. It also has the addition of unique alerts, so you can be notified when divergences occur without spending all day watching the charts. Furthermore, this version of the RSI comes with configurable lookback periods, which can be configured in order to adjust the sensitivity of the divergences, in order to suit shorter or higher timeframe trading approaches. What is the Relative Strength Index ( RSI )? Investopedia describes the Relative Strength Index as follows: “The relative strength index (RSI) is a momentum indicator used in technical analysis. RSI measures the speed and magnitude of a security's recent price changes to evaluate overvalued or undervalued conditions in the price of that security. The RSI is displayed as an oscillator (a line graph) on a scale of zero to 100. The indicator was developed by J. Welles Wilder Jr. and introduced in his seminal 1978 book, New Concepts in Technical Trading Systems. The RSI can do more than point to overbought and oversold securities. It can also indicate securities that may be primed for a trend reversal or corrective pullback in price. It can signal when to buy and sell. Traditionally, an RSI reading of 70 or above indicates an overbought situation. A reading of 30 or below indicates an oversold condition.” The RSI is also commonly used to spot divergences. You can read more about the RSI and its calculations here What are divergences? Divergence is when the price of an asset is moving in the opposite direction of a technical indicator, such as an oscillator, or is moving contrary to other data. Divergence warns that the current price trend may be weakening, and in some cases may lead to the price changing direction. There are 4 main types of divergence, which are split into 2 categories; regular divergences and hidden divergences. Regular divergences indicate possible trend reversals, and hidden divergences indicate possible trend continuation. Regular bullish divergence: An indication of a potential trend reversal, from the current downtrend, to an uptrend. Regular bearish divergence: An indication of a potential trend reversal, from the current uptrend, to a downtrend. Hidden bullish divergence: An indication of a potential uptrend continuation. Hidden bearish divergence: An indication of a potential downtrend continuation. How do traders use divergences in their trading? A divergence is considered a leading indicator in technical analysis , meaning it has the ability to indicate a potential price move in the short term future. Hidden bullish and hidden bearish divergences, which indicate a potential continuation of the current trend are sometimes considered a good place for traders to begin, since trend continuation occurs more frequently than reversals, or trend changes. When trading regular bullish divergences and regular bearish divergences, which are indications of a trend reversal, the probability of it doing so may increase when these occur at a strong support or resistance level . A common mistake new traders make is to get into a regular divergence trade too early, assuming it will immediately reverse, but these can continue to form for some time before the trend eventually changes, by using forms of support or resistance as an added confluence, such as when price reaches a moving average, the success rate when trading these patterns may increase. Typically, traders will manually draw lines across the swing highs and swing lows of both the price chart and the oscillator to see whether they appear to present a divergence, this indicator will draw them for you, quickly and clearly, and can notify you when they occur. Setting alerts. With this indicator you can set alerts to notify you when any/all of the above types of divergences occur, on any chart timeframe you choose. Configurable pivot periods. You can adjust the default pivot periods to suit your prefered trading style and timeframe. If you like to trade a shorter time frame, lowering the default lookback values will make the divergences drawn more sensitive to short term price action. Disclaimer: This script includes code from the stock RSI by Tradingview as well as the Divergence for Many Indicators v4 by LonesomeTheBlue.
Pine Script™ indicator
by PHVNTOM_TRADER
3
MTF Fantastic Stochastic (FS+)MTF Fantastic Stochastic (FS+) + Alerts This chart overlay indicator can signal multiple triple-timeframe Stochastic RSI overbought and oversold confluences directly onto your chart, intended for use as a confluence either for reversal trade entries, or potential trade exits, indicating where price may be probable to reverse. Features include: - Primary set of fully configurable triple-timeframe overbought and oversold signals, indicating where 3 selected timeframes are all overbought or all oversold at the same time. Enabled by default. - Secondary set of fully configurable triple-timeframe overbought and oversold signals, indicating where 3 selected timeframes are all overbought or all oversold at the same time, with alert option. Enabled by default. - Also includes standard configurable Stoch RSI options, including k length, d length, RSI length, Stochastic length, etc. - The default primary MTF #1 timeframes are set to 1minute, 5minute and 15minute. These are highly suitable for low timeframe scalpers trading on charts less than 5 minutes, and can often pin point price reversals. - The default Secondary MTF #2 timeframes are set to 15minute, 30minute and 60minute. These are suitable for both low timeframe scalpers and considerably higher timeframe traders. - Optional drawing of background colours and/or ribbon seen at bottom of the chart. - Fully configurable timeframes, as well as overbought and oversold threshold levels for each individual timeframe. Overbought and oversold thresholds are set to the factory 80 and 20 levels respectively for all timeframes by default. - Alert features for both MTF #1 and MTF #2 triple-timeframe confluences, including options for alerting overbought and oversold individually, as well as an option for alerting either overbought or oversold in a single alert. Note: THe features listed above are accurate at the time of publishing but maybe updated or added to in future. The Stochastic RSI The popular oscillator has been described as follows: “The Stochastic RSI is an indicator used in technical analysis that ranges between zero and one (or zero and 100 on some charting platforms) and is created by applying the Stochastic oscillator formula to a set of relative strength index ( RSI ) values rather than to standard price data. Using RSI values within the Stochastic formula gives traders an idea of whether the current RSI value is overbought or oversold. The Stochastic RSI oscillator was developed to take advantage of both momentum indicators in order to create a more sensitive indicator that is attuned to a specific security's historical performance rather than a generalized analysis of price change.” How do traders use overbought and oversold levels in their trading? The oversold level, that is when the Stochastic RSI is above the 80 level is typically interpreted as being 'overbought', and below the 20 level is typically considered 'oversold'. Traders will often use the Stochastic RSI at an overbought level as a confluence for entry into a short position, and the Stochastic RSI at an oversold level as a confluence for an entry into a long position. These levels do not mean that price will necessarily reverse at those levels in a reliable way, however. This is why this version of the Stoch RSI employs the triple timeframe overbought and oversold confluence, in an attempt to add a more confluence and reliability to this usage of the Stoch RSI. This indicator was originally built as one of a many features included in the RF+ Divergence Scalping System and has been separated into it's own standalone indicator here for traders who do not want the many other features bundled into the original indicator. A number of features that exist in the original were intensive, and also quite niche. Therefore this lightweight single purpose chart overlay indicator offers this versatile feature of the ever popular Stochastic RSI to a wider audience of traders who may add it to various strategies.
Pine Script™ indicator
by PHVNTOM_TRADER
16
Auto Fibo Multi Timeframe [Misu]█ This indicator shows a Multi Timeframe automatic Fibonacci retracement levels. This indicator is built using pivots from a user-selected timeframe to draw and orient the Fibonacci retracement. Fibonacci analysis uses a logical sequence of numbers to predict trends and price action. █ Usages: The Fibonacci retracement is used to identify hidden support and resistance levels that an investor can use for entry, exit, and stop placement. Depending on your usage, you can track breakouts above and below retracement levels to provide early entry points for major breakouts and breakdowns. Higher timeframe Fibs allow you to have more relevant and weighted signals. █ Features: Choose Timeframe Choose Fib levels Color Fib Levels Individually Color Fib Levels all in one █ Parameters: Timeframe: The Timeframe chosen. Left Bars: A parameter used to calculate pivots. Right Bars: A parameter used to calculate pivots. UI Settings: Select Fibs levels and colors.
Pine Script™ indicator
by Fontiramisu
14
Multi-Optimized Linear Regression ChannelA take on alexgrover 's Optimized Linear Regression Channel script which allows users to apply multiple linear regression channel with unique multiplicative factors. Multiplicative Factors Adjust the amount of channels and multiplicative factors of existing or additional channels using the "Mults" input. An input of "1" creates a single linear regression channel with the multiplicative factor of one. An input of "4" creates a single linear regression channel with the multiplicative factor of four. An input of "1,4" creates two linear regression channels with multiplicative factors of one and four. An input of "1,2,3" creates three linear regression channels with multiplicative factors of one, two, and three.
Pine Script™ indicator
by Fuwn
2
TMO ArrowsTMO - (T)rue (M)omentum (O)scillator) MTF Arrows Do you want to use TMO but you lack space on the chart? This study is just for you. This is the more user-friendly version of the TMO Oscillator. In terms of the indicator there are no changes except the indicator is converted in to the simple arrows. There are Four Types of Arrows: 1. TMO Arrow Up - Visualizes the TMO bullish crosses. 2. TMO Arrow Down - Visualizes the TMO bearish crosses. 3. TMO Arrow Up (Oversolds Only) - Visualizes only the bullish crosses that are at or below the oversold zone. 4. TMO Arrow Down (Overboughts Only) - Visualizes only the bearish crosses that are at or above the overbought zone. In case you only want the arrows for extremes, turn off the Arrow Up / Arrow Down first. Arrows for extremes only are turned off by default. Hope it helps.
Pine Script™ indicator
by lnlcapital
5
RF+ Divergence Scalping SystemRF+ Divergence Scalping System + Custom Signals + Alerts. This chart overlay indicator has been developed for the low timeframe divergence scalper. Built upon the realtime divergence drawing code from the Divergence for Many indicator originally authored by Lonsometheblue, this chart overlay indicator bundles several additional unique features and modifications to serve as an all-in-one divergence scalping system. The current key features at the time of publishing are listed below (features are optional and can be enabled or disabled): - Fully configurable realtime divergence drawing and alerting feature that can draw divergences directly on the chart using data sourced from up to 11 oscillators selected by the user, which have been included specifically for their ability to detect divergences, including oscillators not presently included in the original Divergence for Many indicator, such as the Ultimate Oscillator and TSI. - Optional on chart table showing a summary of key statuses of various indicators, and nearby divergences. - 2 x Range Filters with custom settings used for low timeframe trend detection. - 3 x configurable multi-timeframe Stochastic RSI overbought and oversold signals with presentation options. - On-chart pivot points drawn automatically. - Automatically adjusted pivot period for up to 4 configurable time frames to fine tune divergences drawn for optimal divergence detection. - Real-price line for use with Heikin Ashi candles, with styling options. - Real-price close dots for use with Heikin Ashi candles, with styling options. - A selection of custom signals that can be printed on-chart and alerted. - Sessions indicator for the London, New York, Tokyo and Sydney trading sessions, including daylight savings toggle, and unique ‘invert background color’ option, which colours the entire chart - except the trading session you have selected, leaving your chart clear of distracting background color. - Up to 4 fully configurable moving averages. - Additional configurable settings for numerous built in indicators, allowing you to alter the lengths and source types, including the UO, TSI, MFI, TSV, 2 x Range Filters. - Configurable RSI Trend detection signal filter used in a number of the signals, which filters buy signals where the RSI is over the RSI moving average, and only prints sell signals where RSI is under the moving average. - Customisable on-chart watermark, with inputs for a custom title, subtitle, and also an optional symbol | timeframe | date feature. The Oscillators able to be selected for use in drawing divergences at the time of publishing are as follows: - Ultimate Oscillator (UO) - True Strength Indicator (TSI) - Money Flow Index (MFI) - Cumulative Delta Volume (CDV) - Time Segmented Volume (TSV) - Commodity Channel Index (CCI) - Awesome Oscillator - Relative Strength Index (RSI) - Stochastic - On Balance Volume (OBV) - MACD Histogram What are divergences? Divergence is when the price of an asset is moving in the opposite direction of a technical indicator, such as an oscillator, or is moving contrary to other data. Divergence warns that the current price trend may be weakening, and in some cases may lead to the price changing direction. There are 4 main types of divergence, which are split into 2 categories; regular divergences and hidden divergences. Regular divergences indicate possible trend reversals, and hidden divergences indicate possible trend continuation. Regular bullish divergence: An indication of a potential trend reversal, from the current downtrend, to an uptrend. Regular bearish divergence: An indication of a potential trend reversal, from the current uptrend, to a downtrend. Hidden bullish divergence: An indication of a potential uptrend continuation. Hidden bearish divergence: An indication of a potential downtrend continuation. Setting alerts. With this indicator you can set alerts to notify you when any/all of the above types of divergences occur, on any chart timeframe you choose, also when the triple timeframe Stochastic RSI overbought and oversold confluences occur, as well as when custom signals are printed. Configurable pivot period values. You can adjust the default pivot period values to suit your prefered trading style and timeframe. If you like to trade a shorter time frame, lowering the default lookback values will make the divergences drawn more sensitive to short term price action. By default, this indicator has enabled the automatic adjustment of the pivot periods for 4 configurable time frames, in a bid to optimize the divergences drawn when the indicator is loaded onto any of the 4 time frames selected. These time frames and their associated pivot periods can be fully reconfigured within the settings menu. By default, these have been further optimized for the low timeframe scalper trading on the 1-15 minute time frames. How do traders use divergences in their trading? A divergence is considered a leading indicator in technical analysis , meaning it has the ability to indicate a potential price move in the short term future. Hidden bullish and hidden bearish divergences, which indicate a potential continuation of the current trend are sometimes considered a good place for traders to begin, since trend continuation occurs more frequently than reversals, or trend changes. When trading regular bullish divergences and regular bearish divergences, which are indications of a trend reversal, the probability of it doing so may increase when these occur at a strong support or resistance level . A common mistake new traders make is to get into a regular divergence trade too early, assuming it will immediately reverse, but these can continue to form for some time before the trend eventually changes, by using forms of support or resistance as an added confluence, such as when price reaches a moving average, the success rate when trading these patterns may increase. Typically, traders will manually draw lines across the swing highs and swing lows of both the price chart and the oscillator to see whether they appear to present a divergence, this indicator will draw them for you, quickly and clearly, and can notify you when they occur. How do traders use overbought and oversold levels in their trading? The oversold level is when the Stochastic RSI is above the 80 level is typically interpreted as being 'overbought', and below the 20 level is typically considered 'oversold'. Traders will often use the Stochastic RSI at, or crossing down from an overbought level as a confluence for entry into a short position, and the Stochastic RSI at, or crossing up from an oversold level as a confluence for an entry into a long position. These levels do not mean that price will necessarily reverse at those levels in a reliable way, however. This is why this version of the Stoch RSI employs the triple timeframe overbought and oversold confluence, in an attempt to add a more confluence and reliability to this usage of the Stoch RSI. This indicator is intended for use in conjunction with related panel indicators including the TSI+ (True Strength Indicator + Realtime Divergences), UO+ (Ultimate Oscillator + Realtime Divergences), and optionally the STRSI+ (MTF Stochastic RSI + Realtime Divergences) and MFI+ (Money Flow Index + Realtime Divergences) available via this authors’ Tradingview profile, under the scripts section. The realtime divergence drawing code will not identify all divergences, so it is suggested that you also have panel indicators to observe. Each panel indicator also offers additional means of entry confirmation into divergence trades, for example, the Stochastic can indicate when it is crossing down from overbought or up from oversold, the TSi can indicate when the 2 TSI bands cross over one another upward or downward, and the UO and MFI can indicate an entry confluence when they are nearing, or crossing their centerlines, for more confidence in your divergence trade entries. Additional information on the settings for this indicator can be found via the tooltips within the settings menu itself. Further information on feature updates, and usage tips & tricks will be added to the comments section below in due course. Disclaimer: This indicator uses code adapted from the Divergence for Many v4 indicator authored by Lonesometheblue, and several stock indicators authored by Tradingview. With many thanks.
Pine Script™ indicator
by PHVNTOM_TRADER
17
MTF TMOTMO - (T)rue (M)omentum (O)scillator) MTF (Higher Aggregation) Version TMO calculates momentum using the DELTA of price. Giving a much better picture of the trend, reversals & divergences than most momentum oscillators using price. Aside from the regular TMO, this study combines four different TMO aggregations into one indicator for an even better picture of the trend. Once you look deeper into this study you will realize how complex this tool is. This version also produce much more information like crosses, divergences, overbought / oversold signals, higher aggregation fades etc. It is probably not even possible to explain them all, there could easily be an entire e-book about this study. I have been using this tool for a couple of years now, and this is what i have learned so far: Favorite Time Frame Variations: 1. 1m / 5m / 30m - Great for intraday futures or options scalps. 30m TMO serves as the overall trend gauge for the day. 5min dictates the longer term intraday moves as well as direction of the 1min. 1min is for the scalps. When the 5min TMO is sloping higher focus should be on 1min buy signals (red to green cross) and vice versa for the 5min agg. sloping down. 2. 5m / 30m / 60m - Also an interesting variation for day trading the 3-5 min charts. Producing more cleaner & beginner-friendly signals that lasts couple of minutes instead of seconds. 3. 120m / Day / 2 Day - For the 30m to 1H or 2H timeframes. Daily & 2 Day dictates the overall trend. 120 min for the signals. Great for a multi-day swings. 4. Day / 2 Day / Week - Good for the daily charts, swing trading analysis as the weekly dictates the overall trend, daily dictates the signals and the 2 day cleans out the daily signals. If the daily & 2 day are not aligned togather, daily signal means nothing. Weekly dictates 2 day - 2 day dictates daily. 5. Week / Month / 3 Month - Same thing as the previous variation but for the weekly charts. TMO Length: The default vanilla settings are 14,5,3. Some traders prefer 21,5,3 as the TMO length is litle higher = TMO will potenially last little longer which could teoretically produce less false signals but slower crosses which means signals will lag more behind price. The lower the length, the faster the oscillator oscillates. It is the noice vs. the lag debate. The Length can be changed, but i would not personally touch the other two. Few points up or down on length will not drastically change much. But changes on Calc Length and Smooth Length can produce totally different signals from the original. Tips & Tricks: 1. Observe - This is the best tip & trick I can give you. The #1 best way to learn how any study operates is to just observe how it works in certain situations from the past. MTF TMO is not an exception. 2. The Power of the Higher Aggregation - The higher aggregation ALWAYS dictates the lower one. Best way to see this? Just 2x the current timeframe aggregation = so on daily chart, plot the daily & two day TMOs and you will notice how the higher agg. smooths out the current agg. The higher the aggregation is, the smoother (but slower) will the TMO turn. The real power kicks in when the 3 or 4 aggregations are aligned togather in one direction. 3. Position of the Higher Aggregation in Relation to the Extremes - Overbought / oversold signals might not really work on the current aggregation. But pay attention to the higher aggregations in relation to the extremes. Ex: on the daily chart - daily TMO inside the OB / OS extremes might not mean much. But once the higher aggregations such as 3 day or Weekly TMO enters OB/OS zone togather with the daily, this can be a very powerful signal for a TMO reversion to the zeroline. 4. Crosses - Yes, crosses do work. Personally, I never really focused on them. The thing about the crosses is that it is crucial to pick the right higher aggregation to the combination of the current one that would be reliable but also print enough signals. The closer the cross is to the OB / OS extremes, the more bigger move can occur. Crosses around the zero line can be considered as less quality crosses. 5. Divergences - TMO can print awesome divergences. The best divergences are on the current aggregation (TMO agg. same as the chart) since the current agg. oscillates fast, it can usually produce lower lows & higher highs faster then any higher aggregations. Easy setup: wait for the higher aggregation to reach the OB / OS extremes and watch the current (chart) aggregation to print a divergence. 6. Three is Enough - I personally find more than three aggregations messy and hard to read. But there is always the option to turn on the 4th one. Just switch the TMO 4 Main, TMO 4 Signal and TMO 4 Fill in the style settings. Hope it helps.
Pine Script™ indicator
by lnlcapital
5
MTF Stoch RSI + Realtime DivergencesMulti-timeframe Stochastic RSI + Realtime Divergences + Alerts + Pivot lookback periods. This version of the Stochastic RSI adds the following additional features to the stock UO by Tradingview: - Optional 3 x Multiple-timeframe overbought and oversold signals, indicating where 3 selected timeframes are all overbought (>80) or all oversold (<20) at the same time, with alert option. - Optional divergence lines drawn directly onto the oscillator in realtime, with alert options. - Configurable lookback periods to fine tune the divergences drawn in order to suit different trading styles and timeframes, including the ability to enable automatic adjustment of pivot period per chart timeframe. - Alternate timeframe feature allows you to configure the oscillator to use data from a different timeframe than the chart it is loaded on. - Indications where the Stoch RSI is crossing down from above the overbought threshold (<80) and crossing above the oversold threshold (>20) levels on a given user selected timeframe, by printing gold dots on the indicator. - Also includes standard configurable Stoch RSI options, including k length, d length, RSI length, Stochastic length, and source type (close, hl2, etc) While this version of the Stochastic RSI has the ability to draw divergences in realtime along with related settings and alerts so you can be notified as divergences occur without spending all day watching the charts, the main purpose of this indicator was to provide the triple multiple-timeframe overbought and oversold confluence signals and alerts, in an attempt to add more confluence, weight and reliability to the single timeframe overbought and oversold states, commonly used for trade entry confluence. It's primary purpose is intended for scalping on lower timeframes, typically between 1-15 minutes. The triple timeframe overbought can often indicate near term reversals to the downside, with the triple timeframe oversold often indicating neartime reversals to the upside. The default timeframes for this confluence are set to check the 1 minute, 5 minute, and 15 minute timeframes, ideal for scalping the < 15 minute charts. The Stochastic RSI The popular oscillator has been described as follows: “The Stochastic RSI is an indicator used in technical analysis that ranges between zero and one (or zero and 100 on some charting platforms) and is created by applying the Stochastic oscillator formula to a set of relative strength index (RSI) values rather than to standard price data. Using RSI values within the Stochastic formula gives traders an idea of whether the current RSI value is overbought or oversold. The Stochastic RSI oscillator was developed to take advantage of both momentum indicators in order to create a more sensitive indicator that is attuned to a specific security's historical performance rather than a generalized analysis of price change.” How do traders use overbought and oversold levels in their trading? The oversold level, that is when the Stochastic RSI is above the 80 level is typically interpreted as being 'overbought', and below the 20 level is typically considered 'oversold'. Traders will often use the Stochastic RSI at an overbought level as a confluence for entry into a short position, and the Stochastic RSI at an oversold level as a confluence for an entry into a long position. These levels do not mean that price will necessarily reverse at those levels in a reliable way, however. This is why this version of the Stoch RSI employs the triple timeframe overbought and oversold confluence, in an attempt to add a more confluence and reliability to this usage of the Stoch RSI. What are divergences? Divergence is when the price of an asset is moving in the opposite direction of a technical indicator, such as an oscillator, or is moving contrary to other data. Divergence warns that the current price trend may be weakening, and in some cases may lead to the price changing direction. There are 4 main types of divergence, which are split into 2 categories; regular divergences and hidden divergences. Regular divergences indicate possible trend reversals, and hidden divergences indicate possible trend continuation. Regular bullish divergence: An indication of a potential trend reversal, from the current downtrend, to an uptrend. Regular bearish divergence: An indication of a potential trend reversal, from the current uptrend, to a downtrend. Hidden bullish divergence: An indication of a potential uptrend continuation. Hidden bearish divergence: An indication of a potential downtrend continuation. Setting alerts. With this indicator you can set alerts to notify you when any/all of the above types of divergences occur, on any chart timeframe you choose, and also when the triple timeframe overbought and oversold confluences occur. Configurable pivot lookback values. You can adjust the default pivot lookback values to suit your prefered trading style and timeframe. If you like to trade a shorter time frame, lowering the default lookback values will make the divergences drawn more sensitive to short term price action. By default, this indicator has enabled the automatic adjustment of the pivot periods for 4 configurable timeframes, in a bid to optimise the divergences drawn when the indicator is loaded onto any of the 4 timeframes. These timeframes and the auto adjusted pivot periods on each of them can also be reconfigured within the settings menu. How do traders use divergences in their trading? A divergence is considered a leading indicator in technical analysis , meaning it has the ability to indicate a potential price move in the short term future. Hidden bullish and hidden bearish divergences, which indicate a potential continuation of the current trend are sometimes considered a good place for traders to begin, since trend continuation occurs more frequently than reversals, or trend changes. When trading regular bullish divergences and regular bearish divergences, which are indications of a trend reversal, the probability of it doing so may increase when these occur at a strong support or resistance level . A common mistake new traders make is to get into a regular divergence trade too early, assuming it will immediately reverse, but these can continue to form for some time before the trend eventually changes, by using forms of support or resistance as an added confluence, such as when price reaches a moving average, the success rate when trading these patterns may increase. Typically, traders will manually draw lines across the swing highs and swing lows of both the price chart and the oscillator to see whether they appear to present a divergence, this indicator will draw them for you, quickly and clearly, and can notify you when they occur. Disclaimer: This script includes code from the stock UO by Tradingview as well as the Divergence for Many Indicators v4 by LonesomeTheBlue.
Pine Script™ indicator
by PHVNTOM_TRADER
9
SuperTrend Momentum TableMy goal creating this indicator : Provide a way to see the Past and Current Momentum of multiple different timeframes without using multiple charts. The Underlying Concept / What is Momentum? The Momentum shown is derived from a Mathematical Formula, SUPERTREND. When price closes above Supertrend Its bullish Momentum when its below Supertrend its Bearish Momentum.This indicator scans for bullish & bearish Momentum on the Timeframes selected by the user and when there is a shift in momentum on any of those time frames (price closes below or above SUPERTREND ) it notifies the trader with a color change on the Momentum Table. Back Testing: This indicator will be key for back testing with the SuperTrend-Support-Resistance indicator since the SuperTrend Momentum Table shows you the visual shift in momentum. Giving the Trader a Clear visual on how Each Support and Resistance Level was made . Technical Inputs - If you want to optimize the rate of signals to better fit your trading plan you would change the Factor input and ATR Length input. Increase factor and ATR Length to decrease the frequency of signals and decrease the Factor and ATR Length to increase the frequency of signals. Quick TIP! : You can Sync all VFX SuperTrend Indicators together! All VFX SuperTrend indicators display unique information but its all derived from that same Momentum Formula. Keep the Factor input and ATR Length the same on other VFX SuperTrend indicators to have them operating on the same data. Timeframe Inputs - The indicator has 7 Time frame Displays where you can choose which Time Frames you would like to monitor. - You can limit the amount of time frames being displayed by changing the Time Frame Amount Display Inputs - The trader can specify the bullish and bearish color of all 7 Timeframes - You can toggle (on or off) the Momentum Switch if you want to highlight the exact candle where momentum switched from bullish to bearish and from bearish to bullish . How it can be Used ? Check the momentum of other Timeframes and use that information as a variable to structure your trading plan. - Use Momentum information to track the trend - Plan and limit trades based on the current Momentum of multiple timeframes - See if you have higher momentum to fuel your trades - See breakouts on Multiple Time Frames
Pine Script™ indicator
by Who7is7Like7God
1
6 Multi-Timeframe Supertrend with Heikin Ashi as Source This is a multiple multi-timeframe version of famous supertrernd only with Heikin Ashi as source. Atr which stands in the heart of supertrend is calculated based on heikin-ashi bars which omits a great deal of noises. with 6 multiplication of the supertrend, its simply much easier to spot trend direction or use it as trailing stop with several levels available. this is a great tool to assess and manage your risk and calculate your position volume if you use the heikin ashi supertrend as your stoploss.
Pine Script™ indicator
by Thinkologist
2