Get started

Multitimeframe

Realtime HTF Candle [NLR]This lightweight indicator displays higher timeframe candles on your current chart - in real-time as they form, not just after they close. Unlike most HTF candle indicators that only show completed candles (and often feel bloated with too many features), this script updates the current HTF candle live, including its open, high, low, and close as it develops. 🔹 Features: Draws full-body HTF candles (high-to-low and open-to-close ranges). Supports any custom HTF (e.g., 15m candles on a 1m chart). Color-coded boxes to differentiate between bullish and bearish candles. Live updating HTF candle box as price evolves — no delay. Optional moving average overlays with smoothing to help track short- and long-term trends. Perfect for intraday traders who want to stay aligned with higher timeframe structure without clogging up their charts.
Pine Script® indicator
by NonLinearRookie
2
zone trading stratThis only works for DOGEUSD , I made it for the 8cap chart so only use it for that. If you want this for other symbols/charts you need to comment below or msg me. # Price Zone Trading System: Technical Explanation ## Core Concept The Price Zone Tracker is built on the concept that price tends to respect certain key levels or "zones" on the chart. These zones act as support and resistance areas where price may bounce or break through. The system combines zone analysis with multiple technical indicators to generate high-probability trading signals. ## Zone Analysis The system tracks 9 predefined price zones. Each zone has both a high and low boundary, except for Zone 5 which is represented by a single line. When price enters a zone, the system monitors whether it stays within the zone, breaks above it (bullish), or breaks below it (bearish). This zone behavior establishes the foundational bias of the system: - When price closes above its previous zone: Zone State = Bullish - When price closes below its previous zone: Zone State = Bearish - When price remains within a zone: Zone State = Neutral ## Trend Analysis Components The system performs multi-timeframe analysis using several technical components: 1. **Higher Timeframe Analysis** (±3 points in scoring) - Uses 15-minute charts for sub-5-minute timeframes - Uses 30-minute charts for 5-minute timeframes - Uses 60-minute charts for timeframes above 5 minutes - Evaluates candlestick patterns and EMA crossovers on the higher timeframe 2. **EMA Direction** (±1 point in scoring) - Compares 12-period and 26-period EMAs - Bullish when fast EMA > slow EMA - Bearish when fast EMA < slow EMA 3. **MACD Analysis** (±1 point in scoring) - Uses standard 12/26/9 MACD settings - Bullish when MACD line crosses above signal line with positive histogram - Bearish when MACD line crosses below signal line with negative histogram 4. **Price Action** (±2 points in scoring) - Evaluates whether price is making higher highs/higher lows (uptrend) - Or lower highs/lower lows (downtrend) - Also considers ATR-based volatility and strength of movements ## Trend Score Calculation All these components are weighted and combined into a trend score: - Higher timeframe components have stronger weights (±2-3 points) - Current timeframe components have moderate weights (±1 point) - Price action components have varied weights (±0.5-2 points) The final trend state is determined by thresholds: - Score > +3: Trend Analysis State = Bullish - Score < -3: Trend Analysis State = Bearish - Score between -3 and +3: Trend Analysis State = Neutral ## Signal Generation Logic The system combines the Zone State with the Trend Analysis State: 1. If Zone State and Trend Analysis State are both bullish: - Combined State = Bullish - Line Color = Green 2. If Zone State and Trend Analysis State are both bearish: - Combined State = Bearish - Line Color = Red 3. If Zone State and Trend Analysis State contradict each other: - Combined State = Neutral - Line Color = Black This implements a safety mechanism requiring both zone analysis and technical indicators to agree before generating a directional signal. ## Trading Signals Trading signals are generated based on changes in the Combined State: - When Combined State changes from neutral/bearish to bullish: - Trading Signal = LONG (green triangle appears on chart) - When Combined State changes from neutral/bullish to bearish: - Trading Signal = SHORT (red triangle appears on chart) - When Combined State changes from bullish/bearish to neutral: - Trading Signal = EXIT (yellow X appears on chart) - When Combined State remains unchanged: - Trading Signal = NONE (no new marker appears) ## Reversal Warning The system also monitors for potential reversal conditions: - When Combined State is bullish but both RSI and MFI are overbought (>70) - When Combined State is bearish but both RSI and MFI are oversold (<30) In these cases, a yellow diamond appears on the chart as a warning that a reversal might be imminent. ## Visual Elements The indicator provides multiple visual elements: 1. Zone boundaries as translucent orange areas 2. A single colored line below price (green/red/black) showing the current signal 3. Trading signals as shapes on the chart 4. An information panel showing all relevant indicator values and signals ## Usage Limitations The indicator is designed to work optimally on timeframes below 30 minutes. On higher timeframes, a warning appears and analysis is disabled.
Pine Script® indicator
by user2839409
2
RSI MA Crossover + SAR + VOLUME🧠 RSI MA Crossover + SAR + VOLUME — Smart Signal Suite This script generates precise buy and sell signals based on a combination of: ✅ RSI crossover with its own moving average ✅ Parabolic SAR trend reversals ✅ Optional volume validation (vs average or previous candles) ✅ Optional candle body confirmation ✅ Directional RSI filters with adjustable limits ✅ Smart signal delay to avoid repetition ✅ ✅ Advanced trigger logic: Let SAR reversal act as a signal if RSI crossed recently All filters and conditions are customizable, giving you full control over signal precision and behavior. 🔧 Ideal for scalpers, swing traders, and strategy testers looking for smart logic and advanced filtering. Let me know if you'd like a Spanish version as well or a shorter version for socials!
Pine Script® indicator
by iaorozco
1
Shaved Candle IdentifierThis script is different because it actually highlights the candle and is not just an icon. It will identify bars that have no wick. Each color represents a different type of candle. Shaved candles represent major liquidity zones, and tend to get swept in the future. Shaved candles are useful for spotting reversals and as price targets. Green is when open = low Red is when open = high Blue is when close = high Orange is when close = low There is 0 tolerance for any deviation, if the price is 0.001 off, it will not be identified. Only absolutely shaved candles will be identified.
Pine Script® indicator
by btcmaxlev
Granular MA Ribbon🎗️ The Granular MA Ribbon provides a structured view of price action on lower timeframes by incorporating both price-based and volume-weighted moving averages, offering a more nuanced view of market trends and momentum shifts. Furthermore, by using 15-minute intervals for its calculations, it ensures that intraday traders receive a smooth and responsive representation of higher timeframe trends. ⚠️ Note that this indicator is specifically optimized for the 15-minute and 1-hour charts; applying it to longer or shorter periods will distort its calculations and reduce its effectiveness. Adjust visibility settings accordingly. 🧰 Unlike traditional moving averages that may lag or fail to reflect real-time shifts in price dynamics, the Granular MA Ribbon includes a one-day exponential moving average (1D EMA), a one-day volume-weighted moving average (1D VWMA), and a one-week exponential moving average (1W EMA). Together, these elements allow traders to stay aligned with the broader market while making precise intraday trading decisions. 🤷🏻 Why Two Daily Moving Averages? 🔊 Instead of relying on a single moving average, this indicator uses both an EMA and a VWMA to provide a clearer picture of price movement. The EMA reacts quickly to price changes, making it a useful tool for identifying short-term momentum shifts. The VWMA, meanwhile, accounts for volume, ensuring that price movements supported by higher trading activity carry greater weight in the trend calculation. 💪🏻 When the EMA and VWMA diverge significantly, it signals strong momentum. If they begin to converge, it suggests that momentum is weakening or that price may be entering consolidation. The space between these two moving averages is filled with a ribbon, making it easier to see shifts in trend strength. A wide ribbon typically indicates strong momentum, while a narrowing ribbon suggests the trend may be losing steam. 🧮 Calculation Rationale 🔎 The 1D EMA and 1D VWMA are constructed using 15-minute blocks to maintain accuracy on lower timeframes. A full trading day consists of 96 fifteen-minute intervals. Instead of relying on daily candle data, which would reduce the granularity of the moving averages, this method allows the indicator to reflect intra-day trends more accurately. By breaking the day into smaller increments, the moving averages adapt more smoothly to changes in price and volume, making them more reliable for traders working on shorter timeframes. 🔍 The weekly EMA follows the same logic, adjusting based on the selected five-day or seven-day setting. If the market follows a standard five-day trading week, the one-week EMA is calculated using 480 fifteen-minute bars. If the market trades seven days a week, such as in crypto, the weekly EMA is adjusted accordingly to reflect 672 fifteen-minute bars. This setting ensures that traders using the indicator across different asset classes receive accurate trend information. 🫤 Sideways Markets 🔄 When the broader market is in a range-bound state, with no clear trend on the one-day or one-week chart, this indicator helps traders make sense of the short-term price structure. In these conditions, the ribbon will often appear flat, with the 1D EMA and 1D VWMA frequently crossing each other. This suggests that momentum is weak and that price action lacks a strong directional bias. ⚠️ A narrowing ribbon in a sideways market indicates reduced volatility and a potential breakout. If the EMA crosses above the VWMA during consolidation, it may signal a short-term upward move, especially if volume begins to increase. Conversely, if the EMA moves below the VWMA, it could indicate that selling pressure is increasing. However, in choppy conditions, crossovers alone are not enough to confirm a trade. Traders should wait for additional confirmation, such as a breakout from a defined range or a shift in volume. ♭ If the weekly EMA remains flat while the daily ribbon fluctuates, it confirms that the market lacks a strong trend. In such cases, traders may consider fading moves near the top and bottom of a range rather than expecting sustained breakouts. 💹 Trending Markets 🏗️ When the market is in a strong uptrend or downtrend, the ribbon takes on a more structured shape. A widening ribbon that slopes upward signals strong bullish momentum, with price consistently respecting the 1D EMA and VWMA as support. In a downtrend, the ribbon slopes downward, acting as dynamic resistance. 📈 In trending conditions, traders can use the ribbon to time pullback entries. In an uptrend, price often retraces to the VWMA before resuming its upward move. If price holds above both the EMA and VWMA, the trend remains strong. If price begins to close below the VWMA but remains above the EMA, it suggests weakening momentum but not necessarily a reversal. A clean break below both moving averages indicates a shift in trend structure. 📊 The one-week EMA serves as a higher timeframe guide. When price remains above the weekly EMA, it confirms that the broader trend is intact. If price pulls back to the weekly EMA and bounces, it can provide a high-confidence trade entry. Conversely, if price breaks below the weekly EMA and fails to reclaim it, it suggests that the trend may be reversing. ⏳ 5-Day and 7-Day Week Variants 🎚️ The setting for a five-day or seven-day trading week adjusts the calculation of the one-week EMA. This ensures that the indicator remains accurate across different asset classes. 5️⃣ A five-day trading week is appropriate for stocks, futures, and forex markets, where trading pauses on weekends. Using a seven-day week for these markets would create artificial distortions by including non-trading days. 7️⃣ In contrast, the seven-day week setting is ideal for crypto markets, which trade continuously. Without this adjustment, the weekly EMA would fail to reflect weekend price action, leading to misleading trend signals. 🧐 This indicator is expressly designed to complement its higher timeframe counterpart, the Triple Differential Moving Average Braid, optimized for the 1-Day chart.
Pine Script® indicator
by TheLeadingIndicator
SuperTrend MTF Pro [Cometreon]The SuperTrend MTF Pro takes the classic SuperTrend to a whole new level of customization and accuracy. Unlike the standard version, this indicator allows you to select different moving averages, apply it to various chart types, and fine-tune every key parameter. If you're looking for an advanced, non-repainting, and highly configurable SuperTrend, this is the right choice for you. 🔷 New Features and Improvements 🟩 Multi-MA SuperTrend Now you can customize the SuperTrend calculation by choosing from 15 different moving averages: SMA (Simple Moving Average) EMA (Exponential Moving Average) WMA (Weighted Moving Average) RMA (Smoothed Moving Average) HMA (Hull Moving Average) JMA (Jurik Moving Average) DEMA (Double Exponential Moving Average) TEMA (Triple Exponential Moving Average) LSMA (Least Squares Moving Average) VWMA (Volume-Weighted Moving Average) SMMA (Smoothed Moving Average) KAMA (Kaufman’s Adaptive Moving Average) ALMA (Arnaud Legoux Moving Average) FRAMA (Fractal Adaptive Moving Average) VIDYA (Variable Index Dynamic Average) 🟩 Multiple Chart Types You're no longer limited to candlestick charts! Now you can use SuperTrend with different chart formats, including: Heikin Ashi Renko Kagi Line Break Point & Figure 🟩 Customizable Timeframe Now you can adjust the SuperTrend timeframe without repainting issues, avoiding signal distortions. 🔷 Technical Details and Customizable Inputs SuperTrend offers multiple customization options to fit any trading strategy: 1️⃣ ATR Period – Defines the ATR length, affecting the indicator’s sensitivity. 2️⃣ Source – Selects the price value used for calculations (Close, HL2, Open, etc.). 3️⃣ ATR Mult – Multiplies the ATR to determine band distance. Higher values reduce false signals, lower values make it more reactive. 4️⃣ Change ATR Calculation Method – When enabled, uses the default ATR method; when disabled, allows selecting another Moving Average with "Use Different Type". 5️⃣ Source Break – Defines the price source for trend changes (Close for more stability, High/Low for more reactivity). 6️⃣ Use Different Type – Allows selecting an alternative Moving Average for ATR calculation if "Change ATR Calculation Method" is disabled. 7️⃣ SuperTrend Type – Advanced options for specific MAs (JMA, ALMA, FRAMA, VIDYA), with dedicated parameters like Phase, Sigma, and Offset for optimized responsiveness. 8️⃣ Ticker Settings – Customize parameters for special chart types such as Renko, Heikin Ashi, Kagi, Line Break, and Point & Figure, adjusting reversal, number of lines, and ATR length. 9️⃣ Timeframe – Enables using SuperTrend on a higher timeframe. 🔟 Wait for Timeframe Closes - Enabled ✅ – Prevents multiple signals, useful for precise alerts. Disabled ❌ – Displays SuperTrend smoothly without interruptions. 🔷 How to Use SuperTrend MTF Pro 🔍 Identifying Trends SuperTrend follows the ongoing trend and provides clear visual signals: When the price is above the line, the trend is bullish. When the price is below the line, the trend is bearish. 📈 Interpreting Signals Line color and position change → Possible trend reversal Bounce off the line → Potential trend continuation Strong breakout of the line → Possible reversal 🛠 Integration with Other Tools RSI or MACD to filter false signals Moving Averages to confirm trend direction Support and Resistance to improve entry points ☄️ If you find this indicator useful, leave a Boost to support its development! Every feedback helps to continuously improve the tool, offering an even more effective trading experience. Share your thoughts in the comments! 🚀🔥
Pine Script® indicator
by Cometreon
1
Adaptive KDJ (MTF)Hey guys, this is an adaptive MTF KDJ oscillator. Pick up to 3 different timeframes, choose a weighting if you want and enjoy the beautiful signals it will show you. The length of every timeframe is adaptive and based of the timeframe's ATR. The plot shows the smoothed average of the 3 KDJ values. Large triangles show KDJ crossings. Small triangles show anticipations of possible crossings. I found out it works best with 1m, 5m, 15m and weighting=1 for forex scalping in 1m. Use other indicators for confluence.
Pine Script® strategy
by Lausekopf
Relative Crypto Dominance Polar Chart [LuxAlgo]The Relative Crypto Dominance Polar Chart tool allows traders to compare the relative dominance of up to ten different tickers in the form of a polar area chart, we define relative dominance as a combination between traded dollar volume and volatility, making it very easy to compare them at a glance. 🔶 USAGE The use is quite simple, traders just have to load the indicator on the chart, and the graph showing the relative dominance will appear. The 10 tickers loaded by default are the major cryptocurrencies by market cap, but traders can select any ticker in the settings panel. Each area represents dominance as volatility (radius) by dollar volume (arc length); a larger area means greater dominance on that ticker. 🔹 Choosing Period The tool supports up to five different periods Hourly Daily Weekly Monthly Yearly By default, the tool period is set on auto mode, which means that the tool will choose the period depending on the chart timeframe timeframes up to 2m: Hourly timeframes up to 15m: Daily timeframes up to 1H: Weekly timeframes up to 4H: Monthly larger timeframes: Yearly 🔹 Sorting & Sizing Traders can sort the graph areas by volatility (radius of each area) in ascending or descending order; by default, the tickers are sorted as they are in the settings panel. The tool also allows you to adjust the width of the chart on a percentage basis, i.e., at 100% size, all the available width is used; if the graph is too wide, just decrease the graph size parameter in the settings panel. 🔹 Set your own style The tool allows great customization from the settings panel, traders can enable/disable most of the components, and add a very nice touch with curved lines enabled for displaying the areas with a petal-like effect. 🔶 SETTINGS Period: Select up to 5 different time periods from Hourly, Daily, Weekly, Monthly and Yearly. Enable/disable Auto mode. Tickers: Enable/disable and select tickers and colors 🔹 Style Graph Order: Select sort order Graph Size: Select percentage of width used Labels Size: Select size for ticker labels Show Percent: Show dominance in % under each ticker Curved Lines: Enable/disable petal-like effect for each area Show Title: Enable/disable graph title Show Mean: Enable/disable volatility average and select color
Pine Script® indicator
by LuxAlgo
6
50 EMA Strategy with RSI & MACD**50 EMA Strategy with RSI & MACD** This Pine Script indicator is designed to identify high-probability trade setups using the **50 EMA**, **RSI**, and **MACD**. The strategy generates **buy and sell signals** based on price interactions with the 50 EMA, combined with momentum confirmation from RSI and MACD. ### **Key Features:** ✅ **50 EMA as Trend Filter** – Determines whether price is in an uptrend or downtrend. ✅ **RSI Confirmation** – Ensures momentum aligns with trade direction (**RSI > 40 for buys, RSI < 60 for sells**). ✅ **MACD Confirmation** – Filters trades with MACD crossovers (**bullish for buys, bearish for sells**). ✅ **Buy Signals** – Triggered when price crosses **above** the 50 EMA, RSI confirms strength, and MACD makes a bullish crossover. ✅ **Sell Signals** – Triggered when price crosses **below** the 50 EMA, RSI confirms weakness, and MACD makes a bearish crossover. ✅ **Alerts & Visual Markers** – Buy and sell signals are plotted on the chart with labels, and alerts are set for easy trade execution. Would you like me to refine the script to improve accuracy or match your specific trading conditions better?
Pine Script® indicator
by amitiaf153
Dynamic Trend Indicator (DTI) - VWAP FilterThe Dynamic Trend Indicator (DTI) with VWAP Filter is a trend-following indicator. It aims to identify and follow market trends while minimizing false signals in choppy or ranging markets. The DTI combines a dynamically adjusted Exponential Moving Average (EMA) with a daily Volume Weighted Average Price (VWAP) confirmation filter and a cooldown mechanism to enhance signal reliability. This indicator is particularly useful for traders on intraday timeframes (e.g., 4-hour charts) who want to align their trades with the broader daily trend while avoiding whipsaws. Key Features: Dynamic Trend Line: The core of the DTI is a trend line calculated using a custom EMA that adjusts its period dynamically based on market conditions. The period of the EMA is determined by a combination of volatility (measured via ATR) and trend strength (measured via price momentum). In strong trends, the period shortens for faster responsiveness; in weak or ranging markets, it lengthens to reduce noise. An optional smoothing EMA can be applied to the dynamic trend line to further reduce noise, with a user-defined smoothing length. Daily VWAP Confirmation Filter: A daily VWAP is calculated to provide a higher-timeframe trend bias. VWAP represents the average price paid for an asset during the day, weighted by volume, and is often used as a benchmark by institutional traders. Buy signals are only generated when the price is above the daily VWAP (indicating a bullish daily bias), and sell signals are only generated when the price is below the VWAP (indicating a bearish daily bias). The VWAP resets at the start of each day, ensuring it reflects the current day’s trading activity. Cooldown Mechanism: To prevent rapid signal reversals (whipsaws), the indicator includes a cooldown period between signals. After a buy or sell signal is generated, no new signals can be generated for a user-defined number of bars (default: 5 bars). This helps filter out noise in choppy markets, ensuring signals are spaced out and more likely to align with significant trend changes. Visual Elements: Trend Line: Plotted on the chart, colored green when the price is above (uptrend) and red when below (downtrend). A gray color indicates a neutral trend. Buy/Sell Signals: Displayed as green triangles below the bar for buy signals and red triangles above the bar for sell signals. Background Coloring: The chart background is shaded green during uptrends and red during downtrends, providing a quick visual cue of the trend direction. Daily VWAP Line: Optionally plotted as a purple step line, allowing traders to see the VWAP level and its relationship to the price. Alerts: The indicator includes built-in alerts for buy and sell signals, triggered when the price crosses the trend line and satisfies the VWAP filter and cooldown conditions. Alert messages specify whether the signal is a buy or sell and confirm that the VWAP condition was met (e.g., "DTI Buy Signal: Price crossed above trend line and VWAP"). Input Parameters Base Length (default: 14): The base period for calculating volatility and trend strength, used to adjust the dynamic EMA period. Volatility Multiplier (default: 1.5): Adjusts the sensitivity of the dynamic period to market volatility (via ATR). Trend Threshold (default: 0.5): Controls the sensitivity of the dynamic period to trend strength (via price momentum). Use Smoothing (default: true): Enables/disables smoothing of the trend line with an additional EMA. Smoothing Length (default: 3): The period for the smoothing EMA, if enabled. Cooldown Bars (default: 5): The minimum number of bars between consecutive signals, reducing signal frequency in choppy markets. Show Daily VWAP (default: true): Toggles the display of the daily VWAP line on the chart. How It Works Dynamic Trend Line Calculation: Volatility is measured using the Average True Range (ATR) over the base length, scaled by the volatility multiplier. Trend strength is calculated as the absolute price momentum (change in price over the base length) divided by the volatility factor. The dynamic EMA period is adjusted based on the trend strength: stronger trends result in a shorter period (faster response), while weaker trends result in a longer period (more stability). The period is constrained between 5 and 50 to avoid extreme values. A custom EMA function is used to handle the dynamic period, as Pine Script’s built-in ta.ema() requires a fixed length. The trend line is optionally smoothed with a secondary EMA. Signal Generation: A buy signal is generated when the price crosses above the trend line, the price is above the daily VWAP, and the cooldown period has elapsed. A sell signal is generated when the price crosses below the trend line, the price is below the daily VWAP, and the cooldown period has elapsed. The cooldown mechanism ensures that signals are not generated too frequently, reducing false signals in ranging markets. Daily VWAP Calculation: The VWAP is calculated by accumulating the price-volume product (close * volume) and total volume for the day, resetting at the start of each new day. The VWAP is then computed as the cumulative price-volume divided by the cumulative volume, providing a volume-weighted average price for the day. Usage Timeframe: Best suited for intraday timeframes (e.g., 1-hour, 4-hour) where the daily VWAP provides a higher-timeframe trend bias. It can also be used on daily charts with adjustments to the cooldown period. Markets: Works well in trending markets (e.g., forex, crypto, stocks) where the dynamic trend line can capture sustained price movements. The VWAP filter helps align signals with the daily trend, making it effective for assets with clear daily biases. Trading Strategy: Buy: Enter a long position when a green triangle (buy signal) appears, indicating the price has crossed above the trend line and is above the daily VWAP. Sell: Enter a short position (or exit a long) when a red triangle (sell signal) appears, indicating the price has crossed below the trend line and is below the daily VWAP. Use the trend line and VWAP as dynamic support/resistance levels to set stop-losses or take-profit targets. Backtesting: Use TradingView’s strategy tester to evaluate the indicator’s performance on your chosen market and timeframe, adjusting parameters like cooldown_bars and volatility_mult to optimize for profitability. Example On a 4-hour SOLUSDT chart, the DTI with VWAP Filter might show: An uptrend with the price above the green trend line and above the daily VWAP, generating buy signals as the price continues to rise. A downtrend where the price falls below the red trend line and the daily VWAP, generating sell signals that align with the bearish daily bias. During choppy periods, the cooldown mechanism and VWAP filter reduce false signals, ensuring trades are taken only when the price aligns with the daily trend. Limitations Lagging Nature: Like all trend-following indicators, the DTI may lag during sharp price reversals, as the dynamic EMA needs time to adjust. Ranging Markets: While the VWAP filter and cooldown mechanism reduce whipsaws, the indicator may still generate some false signals in strongly ranging markets. Combining it with a trend strength filter (e.g., ADX) can help. VWAP Dependency: The effectiveness of the VWAP filter depends on the market’s respect for the daily VWAP as a support/resistance level. In markets with low volume or erratic price action, the VWAP may be less reliable. Potential Improvements VWAP Buffer: Add a percentage buffer around the VWAP (e.g., require the price to be 1% above/below) to further reduce noise. Multi-Timeframe VWAP: Incorporate a weekly VWAP for additional trend confirmation on longer timeframes. Trend Strength Filter: Add an ADX filter to ensure signals are generated only during strong trends (e.g., ADX > 25).
Pine Script® indicator
by csokosgeza7ofi2
VIX Implied MovesKey Features: Three Timeframe Bands: Daily: Blue bands showing ±1σ expected move Weekly: Green bands showing ±1σ expected move 30-Day: Red bands showing ±1σ expected move Calculation Methodology: Uses VIX's annualized volatility converted to specific timeframes using square root of time rule Trading day convention (252 days/year) Band width = Price × (VIX/100) ÷ √(number of periods) Visual Features: Colored semi-transparent backgrounds between bands Progressive line thickness (thinner for shorter timeframes) Real-time updates as VIX and ES prices change Example Calculation (VIX=20, ES=5000): Daily move = 5000 × (20/100)/√252 ≈ ±63 points Weekly move = 5000 × (20/100)/√50 ≈ ±141 points Monthly move = 5000 × (20/100)/√21 ≈ ±218 points This indicator helps visualize expected price ranges based on current volatility conditions, with wider bands indicating higher market uncertainty. The probabilistic ranges represent 68% confidence levels (1 standard deviation) derived from options pricing.
Pine Script® indicator
by Marruq
Super Cycle Low FinderHow the Indicator Works 1. Inputs Users can adjust the cycle lengths: Daily Cycle: Default is 40 days (within 36-44 days). Weekly Cycle: Default is 26 weeks (182 days, within 22-31 weeks). Yearly Cycle: Default is 4 years (1460 days). 2. Cycle Low Detection Function: detect_cycle_low finds the lowest low over the specified period and confirms it with a bullish candle (close > open). Timeframes: Daily lows are calculated directly; weekly and yearly lows use request.security to fetch data from higher timeframes. 3. Half Cycle Lows Detected over half the cycle length, plotted to show mid-cycle strength or weakness. 4. Cycle Translation Logic: Compares the position of the highest high to the cycle’s midpoint. Output: "R" for right translated (bullish), "L" for left translated (bearish), displayed above bars. 5. Cycle Failure Flags when a new low falls below the previous cycle low, indicating a breakdown. 6. Visualization Cycle Lows: Diamonds below bars (yellow for daily, green for weekly, blue for yearly). Half Cycle Lows: Circles below bars (orange, lime, aqua). Translations: "R" or "L" above bars in distinct colors. Failures: Downward triangles below bars (red, orange, purple).
Pine Script® indicator
by chuckb504
Killzones (Box Style, Custom Colors) - NY TimeThis indicator visually highlights the 3 main trading sessions ("killzones") — Asia, London, and New York — on any intraday chart using box overlays that automatically adjust to price action and time, locked to America/New_York timezone. 📅 Killzones Defined: Killzone NY Time Purpose Asia Session 7:00 PM – 10:00 PM (Previous Day) Preps for overnight moves, often shows low volatility or accumulation London Session 2:00 AM – 5:00 AM Often sets the daily high/low, high volatility NY Session 7:00 AM – 10:00 AM Big volume from US open, news events, major moves Each killzone is shown with a colored box that: Begins at the exact killzone open time Ends at the killzone close Expands vertically to encompass all highs and lows that occur within the session
Pine Script® indicator
by bjeightythree
Multi-SMA Levels**Indicator Name:** Triple SMA Trend Analyzer **Version:6 **Type:** Moving Average Trend Analysis Tool ### 📊 **Indicator Functionality** This indicator plots three Simple Moving Averages (100, 150, and 200 periods) to: 1. Identify the market's primary trend direction 2. Highlight dynamic support/resistance levels 3. Detect potential trend reversals through SMA crossovers ### 🎯 **Key Features** - **SMA 100 (Blue):** Short-term trend filter - **SMA 150 (Orange):** Intermediate trend confirmation - **SMA 200 (Red):** Long-term market bias (bullish/bearish) - Customizable periods and colors - Clear visual presentation on all timeframes ### 💡 **How to Trade With This Indicator** **🔷 Trend Identification:** - **Bullish Market:** Price above all three SMAs (stacked in order: 100 > 150 > 200) - **Bearish Market:** Price below all three SMAs (stacked in order: 100 < 150 < 200) **🔶 Trading Signals:** 1. **Bounce Plays:** - Look for price to bounce off SMAs in trending markets - Example: In uptrend, buy when price pulls back to SMA 100/150 2. **Breakout Trading:** - Watch for price closing above/below all three SMAs - Confirm with increased volume 3. **Crossover Signals:** - SMA 100 crossing above 150/200 = Potential bullish momentum - SMA 100 crossing below 150/200 = Potential bearish reversal **⚙️ Optimal Settings:** - Works best on daily/4h charts for swing trading - Combine with RSI (14 period) for overbought/oversold confirmation ### 📝 **Pro Tips** - The SMA 200 is widely watched by institutions - major reactions often occur here - During strong trends, the SMA 100 often acts as dynamic support/resistance - For day trading, apply to 15m/1h charts with adjusted periods (e.g., 50/100/200) This multi-timeframe tool helps traders: ✓ Filter trade direction ✓ Identify key levels ✓ Spot high-probability entries ✓ Manage risk effectively
Pine Script® indicator
by Parsa_gheidi
ADX BoxDescription: The ADX Box indicator provides traders with a quick and intuitive way to monitor the current trend strength based on the Average Directional Index (ADX), calculated with a customisable period (default: 7 periods). This compact indicator neatly displays the current ADX value rounded to one decimal place, along with a clear directional arrow: Green upward triangle (▲): Indicates that ADX is rising above its moving average, signaling increasing trend strength. Red downward triangle (▼): Indicates that ADX is declining below its moving average, signaling weakening trend strength. Key Features: Small and clean visual representation. Dynamically updates in real-time directly on the chart. Ideal for quick trend strength assessment without cluttering your workspace. Recommended Usage: Quickly identifying whether market trends are strengthening or weakening. Enhancing decision-making for trend-following or breakout trading strategies. Complementing other indicators such as ATR boxes for volatility measurement. Feel free to use, share, and incorporate this indicator into your trading setups for clearer insights and more confident trading decisions!
Pine Script® indicator
by TheDocileTrader
Multi-Fibonacci Trend Average[FibonacciFlux]Multi-Fibonacci Trend Average (MFTA): An Institutional-Grade Trend Confluence Indicator for Discerning Market Participants My original indicator/Strategy: Engineered for the sophisticated demands of institutional and advanced traders, the Multi-Fibonacci Trend Average (MFTA) indicator represents a paradigm shift in technical analysis. This meticulously crafted tool is designed to furnish high-definition trend signals within the complexities of modern financial markets. Anchored in the rigorous principles of Fibonacci ratios and augmented by advanced averaging methodologies, MFTA delivers a granular perspective on trend dynamics. Its integration of Multi-Timeframe (MTF) filters provides unparalleled signal robustness, empowering strategic decision-making with a heightened degree of confidence. MFTA indicator on BTCUSDT 15min chart with 1min RSI and MACD filters enabled. Note the refined signal generation with reduced noise. MFTA indicator on BTCUSDT 15min chart without MTF filters. While capturing more potential trading opportunities, it also generates a higher frequency of signals, including potential false positives. Core Innovation: Proprietary Fibonacci-Enhanced Supertrend Averaging Engine The MFTA indicator’s core innovation lies in its proprietary implementation of Supertrend analysis, strategically fortified by Fibonacci ratios to construct a truly dynamic volatility envelope. Departing from conventional Supertrend methodologies, MFTA autonomously computes not one, but three distinct Supertrend lines. Each of these lines is uniquely parameterized by a specific Fibonacci factor: 0.618 (Weak), 1.618 (Medium/Golden Ratio), and 2.618 (Strong/Extended Fibonacci). // Fibonacci-based factors for multiple Supertrend calculations factor1 = input.float(0.618, 'Factor 1 (Weak/Fibonacci)', minval=0.01, step=0.01, tooltip='Factor 1 (Weak/Fibonacci)', group="Fibonacci Supertrend") factor2 = input.float(1.618, 'Factor 2 (Medium/Golden Ratio)', minval=0.01, step=0.01, tooltip='Factor 2 (Medium/Golden Ratio)', group="Fibonacci Supertrend") factor3 = input.float(2.618, 'Factor 3 (Strong/Extended Fib)', minval=0.01, step=0.01, tooltip='Factor 3 (Strong/Extended Fib)', group="Fibonacci Supertrend") This multi-faceted architecture adeptly captures a spectrum of market volatility sensitivities, ensuring a comprehensive assessment of prevailing conditions. Subsequently, the indicator algorithmically synthesizes these disparate Supertrend lines through arithmetic averaging. To achieve optimal signal fidelity and mitigate inherent market noise, this composite average is further refined utilizing an Exponential Moving Average (EMA). // Calculate average of the three supertends and a smoothed version superlength = input.int(21, 'Smoothing Length', tooltip='Smoothing Length for Average Supertrend', group="Fibonacci Supertrend") average_trend = (supertrend1 + supertrend2 + supertrend3) / 3 smoothed_trend = ta.ema(average_trend, superlength) The resultant ‘Smoothed Trend’ line emerges as a remarkably responsive yet stable trend demarcation, offering demonstrably superior clarity and precision compared to singular Supertrend implementations, particularly within the turbulent dynamics of high-volatility markets. Elevated Signal Confluence: Integrated Multi-Timeframe (MTF) Validation Suite MFTA transcends the limitations of conventional trend indicators by incorporating an advanced suite of three independent MTF filters: RSI, MACD, and Volume. These filters function as sophisticated validation protocols, rigorously ensuring that only signals exhibiting a confluence of high-probability factors are brought to the forefront. 1. Granular Lower Timeframe RSI Momentum Filter The Relative Strength Index (RSI) filter, computed from a user-defined lower timeframe, furnishes critical momentum-based signal validation. By meticulously monitoring RSI dynamics on an accelerated timeframe, traders gain the capacity to evaluate underlying momentum strength with precision, prior to committing to signal execution on the primary chart timeframe. // --- Lower Timeframe RSI Filter --- ltf_rsi_filter_enable = input.bool(false, title="Enable RSI Filter", group="MTF Filters", tooltip="Use RSI from lower timeframe as a filter") ltf_rsi_timeframe = input.timeframe("1", title="RSI Timeframe", group="MTF Filters", tooltip="Timeframe for RSI calculation") ltf_rsi_length = input.int(14, title="RSI Length", minval=1, group="MTF Filters", tooltip="Length for RSI calculation") ltf_rsi_threshold = input.int(30, title="RSI Threshold", minval=0, maxval=100, group="MTF Filters", tooltip="RSI value threshold for filtering signals") 2. Convergent Lower Timeframe MACD Trend-Momentum Filter The Moving Average Convergence Divergence (MACD) filter, also calculated on a lower timeframe basis, introduces a critical layer of trend-momentum convergence confirmation. The bullish signal configuration rigorously mandates that the MACD line be definitively positioned above the Signal line on the designated lower timeframe. This stringent condition ensures a robust indication of converging momentum that aligns synergistically with the prevailing trend identified on the primary timeframe. // --- Lower Timeframe MACD Filter --- ltf_macd_filter_enable = input.bool(false, title="Enable MACD Filter", group="MTF Filters", tooltip="Use MACD from lower timeframe as a filter") ltf_macd_timeframe = input.timeframe("1", title="MACD Timeframe", group="MTF Filters", tooltip="Timeframe for MACD calculation") ltf_macd_fast_length = input.int(12, title="MACD Fast Length", minval=1, group="MTF Filters", tooltip="Fast EMA length for MACD") ltf_macd_slow_length = input.int(26, title="MACD Slow Length", minval=1, group="MTF Filters", tooltip="Slow EMA length for MACD") ltf_macd_signal_length = input.int(9, title="MACD Signal Length", minval=1, group="MTF Filters", tooltip="Signal SMA length for MACD") 3. Definitive Volume Confirmation Filter The Volume Filter functions as an indispensable arbiter of trade conviction. By establishing a dynamic volume threshold, defined as a percentage relative to the average volume over a user-specified lookback period, traders can effectively ensure that all generated signals are rigorously validated by demonstrably increased trading activity. This pivotal validation step signifies robust market participation, substantially diminishing the potential for spurious or false breakout signals. // --- Volume Filter --- volume_filter_enable = input.bool(false, title="Enable Volume Filter", group="MTF Filters", tooltip="Use volume level as a filter") volume_threshold_percent = input.int(title="Volume Threshold (%)", defval=150, minval=100, group="MTF Filters", tooltip="Minimum volume percentage compared to average volume to allow signal (100% = average)") These meticulously engineered filters operate in synergistic confluence, requiring all enabled filters to definitively satisfy their pre-defined conditions before a Buy or Sell signal is generated. This stringent multi-layered validation process drastically minimizes the incidence of false positive signals, thereby significantly enhancing entry precision and overall signal reliability. Intuitive Visual Architecture & Actionable Intelligence MFTA provides a demonstrably intuitive and visually rich charting environment, meticulously delineating trend direction and momentum through precisely color-coded plots: Average Supertrend: Thin line, green/red for uptrend/downtrend, immediate directional bias. Smoothed Supertrend: Bold line, teal/purple for uptrend/downtrend, cleaner, institutionally robust trend. Dynamic Trend Fill: Green/red fill between Supertrends quantifies trend strength and momentum. Adaptive Background Coloring: Light green/red background mirrors Smoothed Supertrend direction, holistic trend perspective. Precision Buy/Sell Signals: ‘BUY’/‘SELL’ labels appear on chart when trend touch and MTF filter confluence are satisfied, facilitating high-conviction trade action. MFTA indicator applied to BTCUSDT 4-hour chart, showcasing its effectiveness on higher timeframes. The Smoothed Length parameter is increased to 200 for enhanced smoothness on this timeframe, coupled with 1min RSI and Volume filters for signal refinement. This illustrates the indicator's adaptability across different timeframes and market conditions. Strategic Applications for Institutional Mandates MFTA’s sophisticated design provides distinct advantages for advanced trading operations and institutional investment mandates. Key strategic applications include: High-Probability Trend Identification: Fibonacci-averaged Supertrend with MTF filters robustly identifies high-probability trend continuations and reversals, enhancing alpha generation. Precision Entry/Exit Signals: Volume and momentum-filtered signals enable institutional-grade precision for optimized risk-adjusted returns. Algorithmic Trading Integration: Clear signal logic facilitates seamless integration into automated trading systems for scalable strategy deployment. Multi-Asset/Timeframe Versatility: Adaptable parameters ensure applicability across diverse asset classes and timeframes, catering to varied trading mandates. Enhanced Risk Management: Superior signal fidelity from MTF filters inherently reduces false signals, supporting robust risk management protocols. Granular Customization and Parameterized Control MFTA offers unparalleled customization, empowering users to fine-tune parameters for precise alignment with specific trading styles and market conditions. Key adjustable parameters include: Fibonacci Factors: Adjust Supertrend sensitivity to volatility regimes. ATR Length: Control volatility responsiveness in Supertrend calculations. Smoothing Length: Refine Smoothed Trend line responsiveness and noise reduction. MTF Filter Parameters: Independently configure timeframes, lookback periods, and thresholds for RSI, MACD, and Volume filters for optimal signal filtering. Disclaimer MFTA is meticulously engineered for high-quality trend signals; however, no indicator guarantees profit. Market conditions are unpredictable, and trading involves substantial risk. Rigorous backtesting and forward testing across diverse datasets, alongside a comprehensive understanding of the indicator's logic, are essential before live deployment. Past performance is not indicative of future results. MFTA is for informational and analytical purposes only and is not financial or investment advice.
Pine Script® indicator
by FibonacciFlux
1
Forexsom MA Crossover SignalsA Trend-Following Trading Indicator for TradingView Overview This indicator plots two moving averages (MA) on your chart and generates visual signals when they cross, helping traders identify potential trend reversals. It is designed to be simple yet effective for both beginners and experienced traders. Key Features ✅ Dual Moving Averages – Plots a Fast MA (default: 9-period) and a Slow MA (default: 21-period) ✅ Customizable MA Types – Choose between EMA (Exponential Moving Average) or SMA (Simple Moving Average) ✅ Clear Buy/Sell Signals – Displays "BUY" (green label) when the Fast MA crosses above the Slow MA and "SELL" (red label) when it crosses below ✅ Alerts – Get notified when new signals appear (compatible with TradingView alerts) ✅ Clean Visuals – Easy-to-read moving averages with adjustable colors How It Works Bullish Signal (BUY) → Fast MA crosses above Slow MA (suggests uptrend) Bearish Signal (SELL) → Fast MA crosses below Slow MA (suggests downtrend) Best Used For ✔ Trend-following strategies (swing trading, day trading) ✔ Confirming trend reversals ✔ Filtering trade entries in combination with other indicators Customization Options Adjust Fast & Slow MA lengths Switch between EMA or SMA for smoother or more responsive signals Why Use This Indicator? Simple & Effective – No clutter, just clear signals Works on All Timeframes – From scalping (1M, 5M) to long-term trading (4H, Daily) Alerts for Real-Time Trading – Never miss a signal
Pine Script® indicator
by FOREXSOM