Get started

Psar

[PX] MTF OverviewHello everyone, the new table-functions came out, so I wanted to give it a try. With this indicator you can get an overview for your chart by looking at multiple timeframes and different type of indicators for each timeframe. How does it work? The indicator uses 3 different timeframes, which you can select in the settings-tab. For each timeframe it will look at the following indicators: - Volume for the Volume column - Relative Strength Index (RSI) for the Momentum column - Average True Range (ATR) for the Volatility column - Parabolic SAR (PSAR) for the Trend column Increasing values will be shown in green, decreasing values in red. For the trend it prints a nice little symbol. I'm planning to add more indicators for each indicator category, so that you can choose, which indicators you want to use. Hope that might be useful to some of you :) Please click the "Like"-button and follow me for future open-source script publications. If you are looking for help with your custom PineScript development, don't hesitate to contact me directly here on Tradingview or through the link in my signature :)
Pine Script™ indicator
by paaax
5
Full strategy Psar+ adx + cmf + rsi This ia full strategy made with a combination of a trender, volume, volatility and oscillator. In this case we only go long. Indicators used: Default PSAR Default CMF Modified RSI logic, not using OB/OS ADX with EMA applied The rules are : we check if we are in a uptrend on psar, together with a positive value in volume, rsi is above the middle line(50), using a big length, and lastly the ADx is superior to the ema ADx For exit, we check the opposite, like downtrend psar, negative value volume, rsi < 50, and adx < ema adx If you have any questions let me know.
Pine Script™ strategy
by SoftKill21
4
CHOP Zone Entry Strategy + DMI/PSAR ExitThis is a Strategy with associated visual indicators and Long/Short and Reverse/Close Position Alerts for the Choppiness Index (CHOP) . It is used to determine if the market is choppy (trading sideways) or not choppy (trading within a trend in either direction). CHOP is not directional, so a DMI script was ported into this strategy to allow for trend confirmation and direction determination; it consists of an Average Directional Index (ADX) , Plus Directional Indicator (+DI) and Minus Directional Indicator (-DI) . In addition, a Parabolic SAR is also included to act as a trailing stop during any strong trends. Development Notes --------------------------- This indicator, and most of the descriptions below, were derived largely from the TradingView reference manual. Feedback and suggestions for improvement are more than welcome, as well are recommended Input settings and best practices for use. www.tradingview.com www.tradingview.com www.tradingview.com Recommend using the below DMI and PSAR indicators in conjunction with this script to fully visualize and understand how entry and exit conditions are chosen. Variable inputs should correlate between the scripts for uniformity and visual compatibility. THANKS to LazyBear and his Momentum Squeeze script for helping me quickly develop a momentum state model for coloring the Chop line by trend. Strategy Description --------------------------- CHOP produces values that determine whether the market is choppy or trending . The closer the value is to 100 , the higher the choppiness levels , while the closer it is to 0 , the stronger the market is trending . Territories for both levels, and their associated upper and lower thresholds, are popularly defined using the Fibonacci Retracements, 61.8 and 38.2. Basic Use --------------------------- CHOP is often used to confirm the market condition to help you stay out of sideways markets and only enter when there is movement or imminent explosions. When readings are above the upper threshold, continued sideways movement may be expected, while readings below the lower threshold are typically indicative of a continuing trend. It is also used to anticipate upcoming trendiness changes, with the general belief that extended periods of consolidation (sideways movement) are followed by extended periods of strong, trending, directional movement, and vice versa. One limitation in this index is that you must be cautious in deciding whether the range or trend will likely continue, or if it will reverse. Confidence in price action and trend is higher when two or more indicators are in agreement -- while this strategy combines CHOP with both DMI and PSAR, we would still recommend pairing with other indicators to determine entry or exit trade opportunities. Recommend also choosing 'Once Per Bar Close' when creating alerts. Inputs --------------------------- Strategy Direction - an option to only trade Short, Long, Both, or only in the direction of the Trend (Follow Trend is the Default). Sensitivity - an incremental variable to test whether the past n candles are in the same trend state before triggering a delayed long or short alert (1 is the Default). Can help filter out noise and reduces active alerts. Show Chop Index - two visual styles are provided for user preference, a visible Chop line with a background overlay, or a compact column and label only view. Chop Lookback Period - the time period to be used in calculating CHOP (14 is the Default). Chop Offset - changing this number will move the CHOP either forwards or backwards relative to the current market (0 is the Default). Smooth Chop Line and Length - if enabled, the entered time period will be used in calculating a smooth average of the index (Enabled and 4 are the Defaults). Color Line to Trend Direction - toggles whether the index line is colored to visually depict the current trend direction (Enabled is the Default). Color Background - toggles the visibility of a background color based on the index state (Enabled is the Default). Enable DMI Option - if enabled, then entry will be confirmed by and dependent on the ADX Key Level, with any close or reversal confirmed by both ADX and +/-DI to determine whether there is a strong trend present or not (Enabled is the Default). ADX Smoothing - the time period to be used in calculating the ADX which has a smoothing component (14 is the Default). DI Length - the time period to be used in calculating the DI (14 is the Default). ADX Key Level - any trade with the ADX above the key level is a strong indicator that it is trending (23 to 25 is the suggested setting). Enable PSAR Option - enables trailing stop loss orders (Enabled is the Default). PSAR Start - the starting value for the Acceleration Force (0.015 is our chosen Default, 0.02 is more common). PSAR Increment - the increment in which the Acceleration Force will move (0.001 is our chosen Default, 0.02 is more common). PSAR Max Value - the maximum value of the Acceleration Factor (0.2 is the Default). Color Candles Option - an option to transpose the CHOP condition levels to the main candle bars. Note that the outer red and green border will still be distinguished by whether each individual candle is bearish or bullish during the specified timeframe. Note too that if both DMI and PSAR are deselected, then close determinations will default to a CHOP reversal strategy (e.g., close long when below 38.2 and close short when above 61.8). Though if either DMI or PSAR are enabled, then the CHOP reversal for close determination will automatically be disabled. Indicator Visuals --------------------------- For the candle colors, black indicates tight chop (45 to 55), yellow is loose chop (38.2 to 45 and 55 to 61.8), dark purple is trending down (< 38.2), and dark blue is trending up (> 61.8). The background color has additional shades to differentiate a wider range of more levels… • < 30 is dark purple • 30 to 38.2 is purple • 38.2 to 45 is light purple • 45 to 55 is black • 55 to 61.8 is light blue • 61.8 to 70 is blue • > 70 is dark blue Long, Short, Close, and Reverse labels are plotted on the Chop line, which itself can be colored based on the trend. The chop line can also be hidden for a clean and compact, columnar view, which is my preferred option (see example image below). Visual cues are intended to improve analysis and decrease interpretation time during trading, as well as to aid in understanding the purpose of this strategy and how its inclusion can benefit a comprehensive trading plan. DMI and Trend Strength --------------------------- To analyze trend strength, the focus should be on the ADX line and not the +DI or -DI lines.  An ADX reading above 25 indicates a strong trend , while a reading below 20 indicates a weak or non-existent trend .  A reading between those two values would be considered indeterminable. Though what is truly a strong trend or a weak trend depends on the financial instrument being examined; historical analysis can assist in determining appropriate values. DMI exits trade when ADX is below the user selected key level (e.g., default is 25) and when the +/- DI lines cross (e.g., -DI > +DI exits long position and +DI > -DI exits short position). PSAR and Trailing Stop --------------------------- PSAR is a time and price based indicator that excels at measuring direction and duration, though not the actual strength of a trend, which is why we use this in conjunction with DMI. It is also included in this script as a trailing stop option to maximize gains during strong trends and to mitigate any false ADX strengthening signals. This creates a parabola that is located below the candle during a Bullish trend and above during a Bearish trend. A buy or reversal is signaled when the price crosses above or below the Parabolic SAR. Long/Short Entry --------------------------- 1. CHOP must be over 61.8 (long) or under 38.2 (short). 2. If DMI is enabled, then the ADX signal line must be above the user selected Key Level (default is 25). 3. If Sensitivity is selected, then that past candle must meet the criteria in step 1, as well as all the intermediate candles in between. 4. If "Follow Trend" is selected and PSAR is enabled, then a long position can only open when the momentum and PSAR are in an uptrend, or short when both are in a downtrend, to include all intermediate candles if the Sensitivity option is set on a past candle. Close/Reverse --------------------------- 1. If DMI is enabled, then a close flag will be raised when the ADX signal drops below the Key Level (of 25), and -DI crosses over +DI (if long), or +DI crosses over -DI (if short). 2. If PSAR is enabled, then a close flag will be raised when the current trend state is opposite the last state. 3. If both DMI and PSAR are disabled, then a close flag will be raised if the Chop line drops under 38.2 (if long) or goes over 61.8 (if short). 4. If a Long or Short Entry is triggered on the same candle as any of the above close flags, then the position will be reversed, else the position will be closed. Strategy Alerts --------------------------- 1. Long Entry 2. Short Entry 3. Reverse 4. Close The provided backtest result is based on a position sizing of 10% equity with 100k initial capital. When testing SPX, disabling the DMI performed the best, but EURUSD performed poorly without it enabled, and TSLA had a small reduction in net profit. Timeframe likewise differed between commodities with TSLA performing best at 30M, SPX at 15M, and EURUSD at 4H. I do not plan on using this as a standalone strategy, but I also was expecting better results with the inclusion of EMI and PSAR to compliment the CHOP. Key elements of this script will likely be included in future, more holistic strategies. Disclaimer --------------------------- Past performance may not be indicative of future results. Due to various factors, including changing market conditions, the strategy may no longer perform as well as in historical backtesting. This post and the script are not intended to provide any financial advice. Trade at your own risk. No known repainting, though there may be if an offset is introduced in the Inputs. I did my best not to code any other variables that repaint, but cannot fully attest to this fact.
Pine Script™ strategy
by IronCasper
4
QuantNomad - Heikin-Ashi PSAR AlertsUsing this script you can create alerts for my Heikin-Ashi PSAR Strategy: When creating alerts use "Once Per Bar Close" in parameters. #################### Disclaimer Please remember that past performance may not be indicative of future results. Due to various factors, including changing market conditions, the strategy may no longer perform as good as in historical backtesting. This post and the script don’t provide any financial advice.
Pine Script™ indicator
by QuantNomad
6
QuantNomad - Heikin-Ashi PSAR StrategyContinue experimenting with different combinations of strategies. Here is the PSAR Strategy calculated based on HA candles. HA is already calculated inside the script, do not apply it to HA candles. Strategy is calculated based on 25% equity invested with 0.1% commission. #################### Disclaimer Please remember that past performance may not be indicative of future results. Due to various factors, including changing market conditions, the strategy may no longer perform as good as in historical backtesting. This post and the script don’t provide any financial advice.
Pine Script™ strategy
by QuantNomad
21
ATR Parabolic SAR Strategy [QuantNomad]I created a version of Parabolic SAR when I accelerate it not based on the difference from the extreme point but based on current ATR. So the idea is that for a more volatile market it should move faster. Performance is calculated based on 25% equity invested and 0.1% commission. What do you think about it? Does it make sense to do something like that? Do you have in mind other ways I can accelerate it when the market starts to be more volatile? Disclaimer Please remember that past performance may not be indicative of future results. Due to various factors, including changing market conditions, the strategy may no longer perform as good as in historical backtesting. This post and the script don’t provide any financial advice.
Pine Script™ strategy
by QuantNomad
21
Parabolic SAR Strategy (on close) [QuantNomad]Created a Parabolic SAR strategy where price has to close under/above the level before for it to reverse. This way it should be a bit more stable and protect you from false breakouts. It was impossible to adjust the built-in "sar" function so I implemented PSAR from scratch. So if you're interested in how it's work inside you can check the code and probably adjust to your need if you have a custom modification of PSAR in your mind.
Pine Script™ strategy
by QuantNomad
23
Parabolic SARThis is a redesign of the built-in Parabolic SAR indicator. I added a proper input system, an option to highlight initial points for both lines and an option to choose points width. So, customize it as you want. Parabolic SAR was originally developed by J. Welles Wilder and described in his book "New Concepts in Technical Trading Systems" (1978). It is a trend-following indicator that can be used as a trailing stop loss. To know which settings for PSAR are the most profitable on your instrument and timeframe you can use this tool Profitable Parabolic SAR
Pine Script™ indicator
by everget
79
Crypto market PSAR (cPSAR)This indicator calculates the PSARs of the most liquid cryptocurrencies (as percent differences from the prices) and sums them together. The PSARs under the closes, which act as support, are summed separately and shown in green. The PSARs over the closes (acting as resistance) are summed separately and shown in red. The result is an indicator which can be interpreted somewhat like the RSI (but keep in mind that PSAR is a lagging indicator unlike the RSI which is a leading indicator). By interpreting this correctly you can - SOMETIMES - predict the short-term turns of the entire crypto market. Many traders use the prices shown by PSAR (Parabolic Stop And Reverse) to set stop loss prices and/or to take profit and reverse their positions. This is why, on reversal of the PSARs (= when one of the red or green values becomes visibly larger than the other), a strong turning of the market can, sometimes, occur.
Pine Script™ indicator
by danarm
1
FLT - Fully Loaded TacoThis is a very full indicator. NOTICE: By default, ALL indicators are turned off in the settings, except for the Bollinger Band, in order to facilitate faster load times. Features can easily be turned on/off in the settings. You can have as many or as few as you want. FEATURE LIST: 3 SMAs (Fast, Medium, Slow) 3 EMAs (Fast, Medium, Slow) Support & Resistance Lines (Lime Color) Parabolic Support & Resistance (Red dots above, Blue dots below) Keltner Channel (purple channel lines) Bollinger Band (Blue Cloud; Center & Borders hidden by default) TTM Squeeze (Purple Background Color on Chart) VWAP (Vibrant Blue Glowing Line, Intraday Only) Fibonacci Retracement (Multicolor, Intraday Only) Ichimoku Cloud (Standard Colors)
Pine Script™ indicator
by mattzab
8