Get started

Stoploss

6 Multi-Timeframe Supertrend with Heikin Ashi as Source This is a multiple multi-timeframe version of famous supertrernd only with Heikin Ashi as source. Atr which stands in the heart of supertrend is calculated based on heikin-ashi bars which omits a great deal of noises. with 6 multiplication of the supertrend, its simply much easier to spot trend direction or use it as trailing stop with several levels available. this is a great tool to assess and manage your risk and calculate your position volume if you use the heikin ashi supertrend as your stoploss.
Pine Script™ indicator
by Thinkologist
2
SuperTrend Entry(My goal creating this indicator) : Provide a way to enter the market systematically, automatically create Stop Loss Levels and Take Profit Levels, and provide the position size of each entry based on a fix Percentage of the traders account. The Underlying Concept : What is Momentum? The Momentum shown is derived from a Mathematical Formula, SUPERTREND. When price closes above Supertrend Its bullish Momentum when its below Supertrend its Bearish Momentum. This indicator scans for candle closes on the current chart and when there is a shift in momentum (price closes below or above SUPERTREND) it notifies the trader with a Bar Color change. Technical Inputs - If you want to optimize the rate of signals to better fit your trading plan you would change the Factor input and ATR Length input. Increase factor and ATR Length to decrease the frequency of signals and decrease the Factor and ATR Length to increase the frequency of signals. Quick TIP! : You can Sync all VFX SuperTrend Indicators together! All VFX SuperTrend indicators display unique information but its all derived from that same Momentum Formula. Keep the Factor input and ATR Length the same on other VFX SuperTrend indicators to have them operating on the same data. Display Inputs - The indicator has a candle overlay option you can toggle ON or OFF. If toggled ON the candles color will represent the momentum of your current chart ( bullish or bearish Momentum) your able to change the colors that represent bullish or bearish to your preference - You can toggle on which shows the exact candle momentum switched sides your able to change the colors that represent a bullish switch or bearish switch to your preference - The trader can specify which point you would like your stop loss to reference. (Low and High) Which uses the Low of the Momentum signal as the reference for your Stop Loss during buy signals and the High as the reference during sell signals. Or (Lowest Close and Highest Close) which uses the Lowest Close of the Momentum signal as the reference for your Stop Loss during buys and the Highest Close as the reference during sells. - The colors that represent your Stop Loses and Take Profits can also be changed Risk Management Inputs - Your Risk MANAGMENT section is used to set up how your Stop Loss and Take Profit are calculated - You have the option to take in account Volatility when calculating your Stop Loss. A adjusted ATR formula is used to achieve this. Increase Stop Loss Multiplier from 0 to widen stops. - Increase Take Profit Multiplier from 0 to access visual Take Profit Levels based on your Stop Loss. This will be important for traders that Prefer trading using risk rewards. For Example: If the the Take Profit Multiplier is 3 a Take Profit level 3 times the size or your stop loss from your entry will be shown and a price number corresponding to that Take Profit Level becomes available. - Enter your current Account size, Bet Percentage and Fixed Spread to get your Position Size for each trade -Toggle on the Current Trade Chart and easily get the size of your Position and the exact price of your Take Profit and Stop Loss. You can increase the Size of the Current Trade Chart= Tiny, Small, Normal, Large, Huge and change the Position of the Current trade Chart to your preference, (Top- Right, Center, Left) (Middle- Right, Center, Left) (Bottom- Right, Center, Left). How it can be used ? - Enter Trades and always know where your stop is going to be - Eliminate the need to manual calculate Position Size - Get a consistent view of the current charts momentum - Systematical enter trades - Reduce information overload
Pine Script™ indicator
by Who7is7Like7God
3
X48 - Strategy | MA Type Cross + TPSL | Future&Spot | V.2Thank You For Open Source Code, This Strategy Ref. By 1.Simple Strategy Like MA Crossover For Long/Short or Spot Trade, 2. CDC Action Zone V.2 for BarPaint This Strategy Mixing With MA Crossover Strategy and BarPaint By CDC Action Zone and TP/SL by Varbara ### How To Use Strategy : Setting EMA/SMA Crossover EMA/SMA, Any Value If You Want For Long Position : Cross Up For Short Position : Cross Down Can Use With Spot Trade : Cross Up = Buy, Cross Down = Sell TP/SL When Your OrderSize Change From any % Of Your TP/SL Value ### In Strategy Setting Intitial Capital = Ex. 200 Order Size = Should Be Money Management Not Use 100% of Capital Ex. 10% of Capital (200$) = Order Size 20$ StopLoss and Take Profit = If You Run Trend TF 4H+ or 1D+ You Can Change TP% = 1,000% for nonlimit and Stop Loss 5 - 20% from your order size Ex. Stoploss 15% = OrderSize / 100 x %SL = 20$/100 x 15% = 3$ Loss from order size 20$ (if you not set stop loss.) Base Currency = (Your Currency) # Ex. USD Commission = (Your Trading Fee) # Ex. Future Fee Can Check At Binance Fee Rate > www.binance.com > Choose Your Fee Type, Ex. USD M Future (Regular User) = 0.02 (Maker), 0.04 (Taker) Commission Symbol Type = % # (Ref. By Binance Fee Rate) ### Notice #### Default Setting It's Realistic From Normal Life Ex. Capital 200$ / Ordersize 20$ (10%)/ Commission 0.1% (Buy+Sell) / Slippage = 2 / TP = 1000% (nonlimit) / SL = 15%/OrderSize Low Risk But High Return, Good Luck ### Bot Auto Trade by X4815162342 ### if you wanna try my bot auto trade X48-3in1-bot : Contact My Line ID : x4815x Full Command Alert For This Strategy If You Wanna See It's '{"ex":"'+markettype+'","side": "'+longcommand+'", "amount": "@{{strategy.order.contracts}}", "symbol": "{{ticker}}", "passphrase": "'+passphrase+'","leverage":"'+str.tostring(leveragex)+'"}' '{"ex":"'+markettype+'","side": "'+shortcommand+'", "amount": "@{{strategy.order.contracts}}", "symbol": "{{ticker}}", "passphrase": "'+passphrase+'","leverage":"'+str.tostring(leveragex)+'"}' But Easy Than Full Command Just Use Thisssssss !! Strategy Be Manage Auto Long and Short or TPSL Position You Don't Do Anything Just Use This Message to Alerts Message {{strategy.order.alert_message}} ### If you don't use bot but just looking for strategy test #### Just Pass Bot Setting Function It's Nothing Effect For Strategy !!!!!! Let's Enjoy With Your Strategy BackTest 😁 Remember Beware Max drawdown%. I'm Recommend Lower Than 10% It's Very Good.
Pine Script™ strategy
by X4815162342
7
Take Profit On Trend v2 (by BHD_Trade_Bot)The purpose of strategy is to detect long-term uptrend and short-term downtrend so that you can easy to take profit. The strategy also using BHD unit to detect how big you win and lose, so that you can use this strategy for all coins without worry about it have different percentage of price change. ENTRY The buy order is placed on assets that have long-term uptrend and short-term downtrend: - Long-term uptrend condition: ema200 is going up - Short-term downtrend condition: 2 last candles are down price (use candlestick for less delay) CLOSE The sell order is placed when take profit or stop loss: - Take profit: price increase 2 BHD unit - Stop loss: price decrease 3 BHD unit The strategy use $1000 for initial capital and trading fee is 0.1% for each order. Pro tip: The 1-hour time frame for ETH/USDT has the best results on average.
Pine Script™ strategy
by BHD_Trade_Bot
2
R:R Trading System FrameworkFirst off, huge thanks to @fikira! He was able to adapt what I built to work much more efficiently, allowing for more strategies to be used simultaneously. Simply put, I could not have gotten to this point without you. Thanks for what you do for the TV community. Second, I am fairly new to pinescript writing, so I welcome criticism, thoughtful input and improvement suggestions. I would love to grow this concept into something even better, if possible. So please let me know if you have any ideas for improvement. However I do juggle a lot of different things outside of TV, so implementations may be delayed. I have decided, at this time, not to add alerts. First, because I feel most people looking to adapt this framework can add their own pretty easily. Also, given how customized the framework is currently, while also attempting to account for all the possible ways in which people may want alerts to function after they customize it, it seems best to leave them out as it doesn't exactly fit the idea of a framework. For best viewing, I recommend hovering over the script's name > ... > Visual order > Bring to front. Also I found hollow candles with mono-toned colors (like pictured) are more visually appealing for me personally. I HIGHLY RECOMMEND USING WITH BAR REPLAY TO BETTER UNDERSTAND THE FRAMEWORK'S FUNCTIONALITY. ▶️ WHAT THIS FRAMEWORK IS - A huge collection of concepts and capabilities for those trying to better understand, learn, or teach pinescript. - A system designed to showcase Risk:Reward concepts more holistically by providing all of the most popular components of retail trading to include backtesting, trade visual plotting, position tracking, market condition shifts, and useful info while positioned to help highlight changes in your risk:reward based decision-making processes. - A system that can showcase individual strategies regardless of trade direction, allowing you to develop hedging strategies without having multiple indicators that do not correlate with each other. - Designed around the idea that you trade less numbers of assets but manage your positions and risk based on multiple concurrently running strategies to manage your risk exposure and reward potential. - An attempt to combine all the things you need to execute with an active trading management style. - A framework that uses backtested results (in this case the number of averaged bars it takes to hit key levels) in real-time to inform your risk:reward decision-making while in-trade (in this case in your Trade Tracking Table using dynamic color to show how you might be early, on-time, or late compared to the average amount of backtested time it normally takes to hit that specific key level). ▶️ WHAT THIS FRAMEWORK IS NOT - A complete trading product. DO NOT USE as-is. It is a FRAMEWORK for you to generate ideas of your own and fairly easily implement your own triggering conditions in the appropriate sections of the script. ▶️ USE CASES - If you decide you like the Stop, Target, Trailing Stop, and Risk:Reward components as-is, then just understanding how to plug in your Entry and Bullish / Bearish conditions (Triangles) and adjust the input texts to match your custom naming will be all you need to make it your own! - If you want to adapt certain components, then this system gives you a great starting point to adapt your different concepts and ideas from. ▶️ SYSTEM COMPONENTS - Each of the system's components are described via tooltips both in the input menu and in the tables' cells. - Each label on the chart displays the corresponding price at those triggered conditions on hover with tooltips. - The Trailing Stop only becomes active once it is above the Entry Price for that trade, and brightens to show it is active. The STOP line (right of price) moves once it takes over for the Entry Stop representing the level of the Trailing Stop at that time for that trade. - The Lines / Labels to the right of price will brighten once price is above for Longs or below for Shorts. The Trade Tracking Table cells will add ☑️ once price is above for Longs or below for Shorts. - The brighter boxes on the chart show the trades that occurred based on your criteria and are color coded for all components of each trade type to ensure your references are consistent. (Defaults are TV built-in strategies) - The lighter boxes on the chart show the highest and lowest price levels reached during those trades, to highlight areas where improvements can be made or additional considerations can be accounted for by either adjusting Entry triggers or Bullish / Bearish triggers. - Default Green and Red Triangles (Bullish / Bearish) default to having the same triggering condition as the Entry it corresponds to. This is to highlight either a pyramiding concept, early exit, or you can change to account for other things occurring during your trades which could help you with Stop and Target management/considerations. TradingView and many of its community members have done a lot for me, so this is my attempt to give back.
Editors' picks
Pine Script™ indicator
by carnagecain
130
Value At Risk Channel [AstrideUnicorn]The Value at Risk Channel (VaR Channel) is a trading indicator designed to help traders control the level of risk exposure in their positions. The user can select a time period and a probability value, and the indicator will plot the upper and lower limits that the price can reach during the selected time period with the given probability. CONCEPTS The indicator is based on the Value at Risk (VaR) calculation. VaR is an important metric in risk management that quantifies the degree of potential financial loss within a position, portfolio or company over a specific period of time. It is widely used by financial institutions like banks and investment companies to forecast the extent and likelihood of potential losses in their portfolios. We use the so-called “historical method” to compute VaR. The algorithm looks at the history of past returns and creates a histogram that represents the statistical distribution of past returns. Assuming that the returns follow a normal distribution, one can assign a probability to each value of return. The probability of a specific return value is determined by the distribution percentile to which it belongs. HOW TO USE Let’s assume you want to plot the upper and lower limits that price will reach within 4 hours with 5% probability. To do this, go to the indicator Settings tab and set the Timeframe parameter to "4 hours'' and the Probability parameter to 5.0. You can use the indicator to set your Stop-Loss at the price level where it will trigger with low probability. And what's more, you can measure and control the probability of triggering. You can also see how likely it is that the price will reach your Take-Profit within a specific period of time. For example, you expect your target level to be reached within a week. To determine this probability, set the Timeframe parameter to "1 week" and adjust the Probability parameter so that the upper or lower limit of your VaR channel is close to your Take-Profit level. The resulting Probability parameter value will show the probability of reaching your target in the expected time. The indicator can be a useful tool for measuring and managing risk, as well as for developing and fine-tuning trading strategies. If you find other uses for the indicator, feel free to share them in the comments! SETTINGS Timeframe - sets the time period, during which the price can reach the upper or lower bound of the VaR channel with the probability, set by the Probability parameter. Probability - specifies the probability with which the price can reach the upper or lower bound of the VaR channel during the time period specified by the Timeframe parameter. Window - specifies the length of history (number of historical bars) used for VaR calculation.
Pine Script™ indicator
by AstrideUnicorn
Squeeze Momentum Strategy [LazyBear] Buy Sell TP SL Alerts-Modified version of Squeeze Momentum Indicator by @LazyBear. -Converted to version 5, -Taken inspiration from @KivancOzbilgic for its buy sell calculations, -Used @Bunghole strategy template with Take Profit, Stop Loss and Enable/Disable Toggles -Added Custom Date Backtesting Module ------------------------------------------------------------------------------------------------------------------------ All credit goes to above Problem with original version: The original Squeeze Momentum Strategy did not have buy sell signals and there was alot of confusion as to when to enter and exit. There was no proper strategy that would allow backtesting on which further analysis could be carried out. There are 3 aspects this strategy: 1 ) Strategy Logic (easily toggleable from the dropdown menu from strategy settings) - LazyBear (I have made this simple by using Kivanc technique of Momentums Moving Average Crossover, BUY when MA cross above signal line, SELL when crossdown signal line) - Zero Crossover Line (BUY signal when crossover zero line, and SELL crossdown zero line) 2) Long Short TP and SL - In strategies there is usually only 1 SL and 1 TP, and it is assumed that if a 2% SL giving a good profit %, then it would be best for both long and short. However this is not the case for many. Many markets/pairs, go down with much more speed then they go up with. Hence once we have a profitable backtesting setting, then we should start optimizing Long and Short SL's seperately. Once that is done, we should start optimizing for Long and Short TP's separately, starting with Longs first in both cases. 3) Enable and Disable Toggles of Long and Short Trades - Many markets dont allow short trades, or are not suitable for short trades. In this case it would be much more feasible to disable "Short" Trading and see results of Long Only as a built in graphic view of backtestor provides a more easy to understand data feed as compared to the performance summary in which you have to review long and short profitability separately. 4) Custom Data Backtesting - One of most crucial aspects while optimizing for backtesting is to check a strategies performance on uptrends, downtrend and sideways markets seperately as to understand the weak points of strategy. - Once you enable custom date backtesting, you will see lines on the chart which can be dragged left right based on where you want to start and end the backtesting from and to. Note: - Not a financial advise - Open to feedback, questions, improvements, errors etc. - More info on how the squeeze momentum works visit LazyBear indicator link: Happy Trading! Cheers M Tahreem Alam @mtahreemalam
Pine Script™ strategy
by mtahreemalam
11
Strategy Backtesting Template [MYN]A few people have been asking me to share my backtesting template. Currently I use this as my starting point for validating existing strategies and developing new ones. Features: Trading Date Range Trade Direction 4 progressive take profits with target percents and percentage of position to take profit on (Thanks adolgo) Variable percentage Stop Loss Automatic ProfitView Alert Syntax builder for Longs and Shorts ADX checkbox to automatically add conditional logic to your strategy
Pine Script™ strategy
by myncrypto
12
Jurik-Filtered, Gann HiLo Activator [Loxx]Jurik-Filtered, Gann HiLo Activator is a Gann HiLo activator that has been smoothed using Jurik Filtering to reduce noise and better identify trending markets. What is Gann HiLo The HiLo Activator study is a trend-following indicator introduced by Robert Krausz as part of the Gann Swing trading strategy. In addition to indicating the current trend direction, this can be used as both entry signal and trailing stop. Here is how the HiLo Activator is calculated: 1. The system calculates the moving averages of the high and low prices over the last several candles. By default, the average is calculated using the last three candles. 2. If the close price falls below the average low or rises above the average high, the system plots the opposite moving average. For example, if the price crosses above the average high, the system will plot the average low. If the price crosses below the average low afterward, the system will stop plotting the average low and will start plotting the average high, and so forth. The plot of the HiLo Activator thus consists of sections on the top and bottom of the price plot. The sections on the bottom signify bullish trending conditions. Vice versa, those on the top signify the bearish conditions. What is Jurik Volty used in the Juirk Filter? One of the lesser known qualities of Juirk smoothing is that the Jurik smoothing process is adaptive. "Jurik Volty" (a sort of market volatility ) is what makes Jurik smoothing adaptive. The Jurik Volty calculation can be used as both a standalone indicator and to smooth other indicators that you wish to make adaptive. What is the Jurik Moving Average? Have you noticed how moving averages add some lag (delay) to your signals? ... especially when price gaps up or down in a big move, and you are waiting for your moving average to catch up? Wait no more! JMA eliminates this problem forever and gives you the best of both worlds: low lag and smooth lines. Ideally, you would like a filtered signal to be both smooth and lag-free. Lag causes delays in your trades, and increasing lag in your indicators typically result in lower profits. In other words, late comers get what's left on the table after the feast has already begun. Included -Toggle bar color on/off
Pine Script™ indicator
by loxx
5
'last red low / last green high' exitThis is a good alternative to pivot points and ma lines to find long and short exit points (stop loss prices) for a trade. When you hear traders say "set the stop loss to the recent swing", this indicator seems to do a reasonable job of finding those. This script marks the low of the most recent red candle the high of the most recent green candle in order to help identify a reasonable stop loss exit point for long and short trades. You can also specify a distance threshold to the stop loss point. How to use it. Decide how far from the current price the exit should be (default 1.5%) Use your chosen trading strategy to identify a long or short entry position Add a long/short drawing to the close of the trade candle Set the stop loos of your drawing to the exit line of this indicator Set the take profit of your drawing using the desired risk to reward ratio Note: A good rule is that if this indicator does not show a valid exit line, do not enter the trade. Note: If the change of a new "last Green High" or the "last Red Low" is below 0.5%, the indicator will keep the previous values
Pine Script™ indicator
by carlpwilliams2
4
SL and TP - ATRThis indicator is using ATR ( Average True Range ) to set the Target point and Stop loss. Use the pink number as target, always. If you are in Long position, use the green number as stop loss, so the red number is not useful in Buys. If you are in Short position, use the Red number as stop loss, so the green number is not useful in Sells. ** Need to enter the numbers in ticks --> VERY IMPORTANT: Write it completely, even the numbers after the point sign but DO NOT WRITE the point sign itself. e.g. : if the target tick on indicator is 123.75, you have to write 12375 ticks for your TP. ( one more example: If the number is 0.0001203 , write 1203 ticks. ) Enter the information of the opening candle. Most of the times, risk/reward ratio is a bit higher than 1. Works on multi timeframes. P.S: Haven't checked the weekly timeframe. Not trying to oversell the indicator, but this is perhaps the best TP/SL specifier. For beauty purposes, change (Sl @ buy) and (TP @ sell) to histograms. Histograms are only for visual purposes. Customize the indicator as you want :)) Hope you enjoy
Pine Script™ indicator
by Dr_M_A
Oversold RSI with tight SL Strategy (by Coinrule)This is one of the best strategies that can be used to get familiar with technical indicators and start to include them in your trading bot rules. ENTRY 1. This trading system uses the RSI ( Relative Strength Index ) to anticipate good points to enter positions. RSI is a technical indicator frequently used in trading. It works by measuring the speed and change of price movements to determine whether a coin is oversold (indicating a good entry point) or overbought (indicating a point of exit/entry for a short position). The RSI oscillates between 0 and 100 and is traditionally considered overbought when over 70 and oversold when below 30. 2. To pick the right moment to buy, the strategy enters a trade when the RSI falls below 30 indicating the coin is oversold and primed for a trend reversal. EXIT The strategy then exits the position when the price appreciates 7% from the point of entry. The position also maintains a tight stop-loss and closes the position if the price depreciates 1% from the entry price. The idea behind this is to cut your losing trades fast and let your winners ride. The best time frame for this strategy based on our backtesting data is the daily. Shorter time frames can also work well on certain coins, however in our experience, the daily works best. Feel free to experiment with this script and test it on a variety of your coins! With our backtesting data a trading fee of 0.1% is taken into account. The fee is aligned to the base fee applied on Binance, which is the largest cryptocurrency exchange by volume. In the example shown, this strategy made a handsome net profit of 39.31% on Chainlink with 61.54% of trades being profitable.
Pine Script™ strategy
by Coinrule
Stop Loss With Average True Range (ATR)Stop Loss With Average True Range (ATR) It simplifies the calculation of stop loss price for stop loss method using the average true range (ATR). For example; You want to stop loss below 3 ATR. Let's assume the price is 100, the average true range is 5. You will multiply the average true range by 3 and subtract from the price and enter a stop loss order at the 85 price you have reached. Instead of doing this calculation every time, you just need to use this script and set the multiplier to 3. A stop loss line will be drawn below the price candles. You can set the method to be used when averaging the true range. Methods you can use to average: EMA (exponentially moving average), HMA (hull moving average), RMA (moving average used in RSI), SMA (simple moving average), SWMA (symmetrically weighted moving average), VWMA (volume-weighted moving average), WMA (weighted moving average). You can set the length to be used when averaging the true range. You can set the multiplier to be used when determining the stop loss price. Turkish Ortalama Gerçek Aralıkla (ATR) Zarar Durdurma Gerçek aralığın ortalamasını kullanarak zarar durdurma yöntemi için zarar durdurma fiyatının hesaplanmasını kolaylaştırır. Örneğin; 3 ATR kadar aşağıda zarar durdurmak istiyorsunuz. Fiyatın 100, ortalama gerçek aralığın 5 olduğunu varsayalım. Ortalama gerçek aralığı 3 ile çarparak fiyattan çıkaracaksınız ve ulaştığınız 85 fiyatına zarar durdurma emri gireceksiniz. Bu hesabı her seferinde yapmak yerine bu betiği kullanmanız ve çarpanı 3 olarak ayarlamanız yeterli. Bu sayede fiyat mumlarının altına zarar durdurma çizgisi çizilecektir. Gerçek aralığın ortalaması alınırken kullanılacak yöntemi ayarlayabilirsiniz. Ortalama almak için seçebileceğiniz yöntemler: EMA (üstel hareketli ortalama), HMA (gövde hareketli ortalama), RMA (göreceli hareketli ortalama), SMA (basit hareketli ortalama), SWMA (simetrik ağırlıklı hareketli ortalama), VWMA (hacim ağırıklı hareketli ortalama), WMA (ağırlıklı hareketli ortalama). Gerçek aralığın ortalaması alınırken kullanılacak periyot uzunluğunu ayarlayabilirsiniz. Zarar durdurma fiyatını belirlerken kullanılacak çarpanı ayarlayabilirsiniz.
Pine Script™ indicator
by GormYa
ATR SL + Position Size Calculator [DoctaBot]Props to @Veryfid for his original script 'ATR Stop Loss Finder'. The concept is simple. We use the average true range to determine an appropriate stop loss distance based on recent volatility. The original script calculated the stop loss offset from the current candle's high or low. Here, I've added the option to offset stop loss from the recent local low or local high (a better way in my opinion). I have also added a feature to automatically calculate position size by either dollar amount or as a percent of your account size to suit your risk profile (percent of account at risk per trade). This calculator supports use of leverage to calculate the amount of margin required to open desired position size.
Pine Script™ indicator
by DoctaBot
5
ATR BandsIn many strategies, it's quite common to use a scaled ATR to help define a stop-loss, and it's not uncommon to use it for take-profit targets as well. While it's possible to use the built-in ATR indicator and manually calculate the offset value, we felt this wasn't particularly intuitive or efficient, and could lead to the potential for miscalculations. And while there are quite a few indicators that plot ATR bands in some form or another already on TV, we could not find one that actually performed the exact way that we wanted. They all had at least one of the following gaps: The ATR offset was not configurable (usually hard-coded to be based off the high or low, while we generally prefer to use close) It would only print a single band (either the upper or lower), which would require the same indicator to be added twice The ATR scaling factor was either not configurable or only stepped in whole numbers (often time fractional factors like 1.5 yield better results) To that end, we took to making this enhanced version to meet all of the above requirements. While we were doing so, we decided to take this opportunity to also make some non-functional enhancements as well: Updated the indicator to the most recent version of Pine Updated the indicator definition to allow alternate (non-chart) timeframe usage Made the input types explicitly defined to improve consistency Updated the inputs with appropriate minimum values and step sizes where appropriate Separated settings into logical groups Added helptext to the indicator settings noting usage and common settings values Explicitly titled the on-chart plots of the ATR bands so that they can more easily be identified and referenced in other indicators/scripts, as well as the Data Window Food for thought : When looking at some of the behaviors of these ATR bands, you can see that when price first levels out, you can draw a "consolidation zone" from the first peak of the upper ATR band to the first valley of the lower ATR band that price will generally respect. Look for price to break and close outside of that zone. When that happens, price will usually (but not always) make a notable move in that direction, which can be used as either a potential trigger or as an additional confluence with other indicators/price action. Finally, while we have made what we feel are some noteworthy updates and enhancements to this indicator, and have every intention of continuing to do so as we find worthy opportunities for enhancement, credit is still due to the original author: AlexanderTeaH
Pine Script™ indicator
by TheTrdFloor
14
StopLossThat indicator helps us to determine the stop loss levels or prices in terms of atr levels. It includes 4 (four) options which are 1-Don't Risk, 2-Low Risk, 3-High Risk, 4-Risk Lover their exploding rates are 1-2.4% , 2-3.9% , 3-6.7% , 4-16.7% in sort. It helps us to produce new methods to decreace our risk/reward ratio. It is ATR Trailing StopLoss indicator. The indicator is awesome in terms of comfortable. Thanks and waiting for your feedbacks.
Pine Script™ indicator
by MrMagic09
3
ATRStopLossFinderLibrary "ATRStopLossFinder" Average True Range Stop Loss Finder credits to www.tradingview.com for the initial version stopLossFinder(length, smoothing, multiplier, refHigh, refLow, refClose) Returns the stop losses for an entry on this candle, depending on the ATR   Parameters:      length : simple int optional to select the lookback amount of candles      smoothing : string optional to select the averaging method, options=      multiplier : simple float optional if you want to tweak the speed the trend changes.      refHigh : series float optional if you want to use another timeframe or symbol, pass it's 'high' series here      refLow : series float optional if you want to use another timeframe or symbol, pass it's 'low' series here      refClose : series float optional if you want to use another timeframe or symbol, pass it's 'close' series here   Returns: series float stopLossLong, series float stopLossShort, series float atr
Pine Script™ library
by robbatt
multiple orders - strategy - educationalHi, Here is a 'template', using array's, for multiple orders and different SL/TP levels per trade (This is an example with max 5 open trades) The 'switch' makes sure that the first available position will be used, for example, when 'L1' is closed in the past, and a buy condition is triggered, position 'L1' will be filled, should it be that 'L1', 'L2', 'L3' are already filled, then position 'L4' will be filled, ... An extra table is added with data of the trades Be aware, the 'Buy and Hold' resembles the profit when 100% of the available equity has been bought at the time of the very first trade and sold now. On the other hand, the positions work with a % of equity, 20% per trade (5 x 20 = 100%) You can see that every trade exits on its own terms, without interference of other trades Important, this technique only works if in the strategy() function: - close_entries_rule -> set at 'ANY' - pyramiding is set at max amount of trades or higher (in this case 5 or higher) Cheers!
Pine Script™ strategy
by fikira
28