Get started

Volume Profile

Volume RatioVolume Ratio is to compare current Volume with previous volume If Bullish candle with VR is > 1, it is indicating that Buying interest has increased. If Bullish candle with VR is < 1, it is indicating that Buying momentum is weak. If Bearish candle with VR is > 1, it is indicating that Selling Pressure has increased. If Bearish candle with VR is < 1, it is indicating that Selling momentum is weak. However, if VR is too big e.g above 4, it may indicated that Buying/Selling will climax soon
Pine Script® indicator
by ShawnJay
1
Price Action - Support & Resistance by DGTSᴜᴘᴘᴏʀᴛ ᴀɴᴅ Rᴇꜱɪꜱᴛᴀɴᴄᴇ , is undoubtedly one of the key concepts of technical analysis █  Sᴜᴘᴘᴏʀᴛ ᴀɴᴅ Rᴇꜱɪꜱᴛᴀɴᴄᴇ Dᴇꜰɪɴɪᴛɪᴏɴ Support and Resistance terms are used by traders to refer to price levels on charts that tend to act as barriers, preventing the price of an financial instrument from getting pushed in a certain direction. A support level is a price level where buyers are more aggressive than sellers. This means that the price is more likely to "bounce" off this level rather than break through it. However, once the price has breached this level it is likely to continue falling until meeting another support level. A resistance level is the opposite of a support level. It is where the price tends to find resistance as it rises. Again, this means that the price is more likely to "bounce" off this level rather than break through it. However, once the price has breached this level it is likely to continue rising until meeting another resistance level. A previous support level will sometimes become a resistance level when the price attempts to move back up, and conversely, a resistance level will become a support level as the price temporarily falls back. █  Iᴅᴇɴᴛɪꜰʏɪɴɢ Sᴜᴘᴘᴏʀᴛ ᴀɴᴅ Rᴇꜱɪꜱᴛᴀɴᴄᴇ Support and resistance can come in various forms, and the concept is more difficult to master than it first appears. Identification of key support and resistance levels is an essential ingredient to successful technical analysis. If the price stalls and reverses in the same price area on minimum of two different occasions, then a horizontal line is drawn to show that the market is struggling to move past that area. Those areas are static barriers, one of the most popular forms of support/resistance and are highlighted with horizontal lines. Repeated test , the more often a support/resistance level is "tested" over an extended period of time (touched and bounced off by price), the more significance is given to that specific level High volume , the more buying and selling that has occurred at a particular price level, the stronger the support or resistance level is likely to be Market psychology , plays a major role as traders and investors remember the past and react to changing conditions to anticipate future market movement. Psychological levels , is a price level that significantly affects the price of an underlying financial instrument. Typically, near round numbers often serve as support and resistance The following support and resistance related topics are beyond the scope of this study, so they will be mentioned roughly only as a reference for support and resistance concept Trendlines , Support and resistance levels in trends are dynamic. Throughout an uptrend, levels of support tend to look like a trendline, usually clustering around higher lows. As the price rises, the price where buyers consider the stock to be “too cheap” also changes, which creates new support levels on the way up. The same is also true for resistance levels. In an uptrend, a stock is continuously breaking through perceived resistance levels and making new highs Moving Averages , is a constantly changing line that smooths out past price data while also allowing the trader to identify support and resistance. In the example Notice how the price of the asset finds support at the moving average when the trend is up, and how it acts as resistance when the trend is down The Fibonacci Retracement/Extension tool , is a favorite among many short-term traders because it clearly identifies levels of potential support and resistance Pivot Point Calculations , is another common technical analysis technique, where pivot point is calculated based on the high, low, and closing prices of previous trading session/day and support & resistance levels are projected based on the pivot point, different calculation techniques are available, as presented in this example of an pivot point indicator : PVTvX by DGT █  Tʀᴀᴅɪɴɢ Bᴀꜱᴇᴅ ᴏɴ Sᴜᴘᴘᴏʀᴛ ᴀɴᴅ Rᴇꜱɪꜱᴛᴀɴᴄᴇ Once an area or "zone" of support or resistance has been identified, those price levels can serve as potential entry or exit points because, as a price reaches a point of support or resistance, it will do one of two things—bounce back away from the support or resistance level (trading ranges), or violate the price level and continue in its direction (trading breakouts) —until it hits the next support or resistance level The basic trading method for using support and resistance is to buy near support in uptrends or the parts of ranges or chart patterns where prices are moving up and to sell/sell short near resistance in downtrends or the parts of ranges and chart patterns where prices are moving down. Buying near support or selling near resistance can pay off, but there is no assurance that the support or resistance will hold. Therefore, consider waiting for some confirmation that the market is still respecting that area Trading breakouts, a breakout is a potential trading opportunity that occurs when an asset's price moves above a resistance level or moves below a support level on increasing volume. The first step in trading breakouts is to identify current price trend patterns along with support and resistance levels in order to plan possible entry and exit points. Once the asset trades beyond the price barrier, volatility tends to increase and prices usually trend in the breakout's direction. Breakouts are such an important trading strategy since these setups are the starting point for future volatility increases, large price swings and, in many circumstances, major price trends. When trading breakouts, it is important to consider the underlying asset's support and resistance levels. The more times an asset price has touched these areas, the more valid these levels are and the more important they become. At the same time, the longer these support and resistance levels have been in play, the better the outcome when the asset price finally breaks out. Asset prices will often move slightly further than we expect them to. This doesn't happen all the time, but when it does it is called a false breakout. Therefore it is important to consider waiting for some confirmation while trading breakouts. It’s also popular for traders to sell 50% of their positions at the resistance level, and hold the rest in anticipation of a breakout above resistance █  Pʀɪᴄᴇ Aᴄᴛɪᴏɴ - Sᴜᴘᴘᴏʀᴛ & Rᴇꜱɪꜱᴛᴀɴᴄᴇ ʙʏ DGT Sᴛᴜᴅʏ This experimental study attempts to identify the support and resistance levels. Assumes a simple logic to discover moments where the price is rising or falling consecutively for minimum 3 bars with the condition volume increases on each bar and the last bar’s volume should be bigger than the long term volume moving average. A line will be drawn at the end of the move (highest or lowest, depending on the move direction), the line will be drawn at minimum on the 3rd bar and if condition holds for other consecutive bars the line will switch to 4th, 5th etc bar. Lines will not be deleted so the historical ones will remain and will emphasis the levels significance when they overlap in feature. Strong levels are more likely to hold and cause the price to move in the other direction, whereas the minor levels may only cause the price to pause and keep moving in the same direction. Determining future levels of support and resistance can drastically improve the returns of a short-term investing strategy Bar colors will be painted based on the volume of the specific bar to its long term volume moving average. This will help identifying the support and resistance levels significance and emphasis the sings of breakouts Finally, Volume spikes will be marked on top of the price chart. A high volume usually indicates more interest in the security and the presence of institutional traders. However, a rapidly rising price in an uptrend accompanied by a huge volume may be a sign of exhaustion. Traders usually look for breaks of support and resistance to enter positions. When security break critical levels without volume , you should consider the breakout suspect and prime for a reversal off the highs/lows. Volume spikes are often the result of news-driven events. Volume spike will often lead to sharp reversals since the moves are unsustainable due to the imbalance of supply and demand A good example with many support and resistance concepts observed on a stock chart and detected by the study Settings: Length of volume moving average, where volume moving average is used to detect support and resistance levels, is used as reference to compare with threshold values for volume spikes and colors of the bars Hint, to get more historical lines scrolling chart to left will enable visualization of them. Please note they may appear to much all 500 line limit is used 😉 Special thanks to @HEMANT Telegram user, for his observations and suggestions Disclaimer: Trading success is all about following your trading strategy and the indicators should fit within your trading strategy, and not to be traded upon solely The script is for informational and educational purposes only. Use of the script does not constitute professional and/or financial advice. You alone have the sole responsibility of evaluating the script output and risks associated with the use of the script. In exchange for using the script, you agree not to hold dgtrd TradingView user liable for any possible claim for damages arising from any decision you make based on use of the script
Pine Script® indicator
by dgtrd
285
Waindrops [Makit0]█  OVERALL Plot waindrops (custom volume profiles) on user defined periods, for each period you get high and low, it slices each period in half to get independent vwap, volume profile and the volume traded per price at each half. It works on intraday charts only, up to 720m (12H). It can plot balanced or unbalanced waindrops, and volume profiles up to 24H sessions. As example you can setup unbalanced periods to get independent volume profiles for the overnight and cash sessions on the futures market, or 24H periods to get the full session volume profile of EURUSD The purpose of this indicator is twofold: 1 — from a Chartist point of view, to have an indicator which displays the volume in a more readable way 2 — from a Pine Coder point of view, to have an example of use for two very powerful tools on Pine Script:    • the recently updated drawing limit to 500 (from 50)    • the recently ability to use drawings arrays (lines and labels) If you are new to Pine Script and you are learning how to code, I hope you read all the code and comments on this indicator, all is designed for you, the variables and functions names, the sometimes too big explanations, the overall structure of the code, all is intended as an example on how to code in Pine Script a specific indicator from a very good specification in form of white paper If you wanna learn Pine Script form scratch just start HERE In case you have any kind of problem with Pine Script please use some of the awesome resources at our disposal: USRMAN , REFMAN , AWESOMENESS , MAGIC █  FEATURES Waindrops are a different way of seeing the volume and price plotted in a chart, its a volume profile indicator where you can see the volume of each price level plotted as a vertical histogram for each half of a custom period. By default the period is 60 so it plots an independent volume profile each 30m You can think of each waindrop as an user defined candlestick or bar with four key values:  • high of the period  • low of the period  • left vwap (volume weighted average price of the first half period)  • right vwap (volume weighted average price of the second half period) The waindrop can have 3 different colors (configurable by the user):  • GREEN: when the right vwap is higher than the left vwap (bullish sentiment )  • RED: when the right vwap is lower than the left vwap (bearish sentiment )  • BLUE: when the right vwap is equal than the left vwap ( neutral sentiment ) KEY FEATURES  • Help menu  • Custom periods  • Central bars  • Left/Right VWAPs  • Custom central bars and vwaps: color and pixels  • Highly configurable volume histogram: execution window, ticks, pixels, color, update frequency and fine tuning the neutral meaning  • Volume labels with custom size and color  • Tracking price dot to be able to see the current price when you hide your default candlesticks or bars █  SETTINGS Click here or set any impar period to see the HELP INFO : show the HELP INFO, if it is activated the indicator will not plot PERIOD SIZE (max 2880 min) : waindrop size in minutes, default 60, max 2880 to allow the first half of a 48H period as a full session volume profile BARS : show the central and vwap bars, default true    Central bars : show the central bars, default true    VWAP bars : show the left and right vwap bars, default true    Bars pixels : width of the bars in pixels, default 2    Bars color mode : bars color behavior    • BARS : gets the color from the 'Bars color' option on the settings panel    • HISTOGRAM : gets the color from the Bearish/Bullish/Neutral Histogram color options from the settings panel    Bars color : color for the central and vwap bars, default white HISTOGRAM show the volume histogram, default true    Execution window (x24H) : last 24H periods where the volume funcionality will be plotted, default 5    Ticks per bar (max 50) : width in ticks of each histogram bar, default 2    Updates per period : number of times the histogram will update    • ONE : update at the last bar of the period    • TWO : update at the last bar of each half period    • FOUR : slice the period in 4 quarters and updates at the last bar of each of them    • EACH BAR : updates at the close of each bar    Pixels per bar : width in pixels of each histogram bar, default 4    Neutral Treshold (ticks) : delta in ticks between left and right vwaps to identify a waindrop as neutral, default 0    Bearish Histogram color : histogram color when right vwap is lower than left vwap, default red    Bullish Histogram color : histogram color when right vwap is higher than left vwap, default green    Neutral Histogram color : histogram color when the delta between right and left vwaps is equal or lower than the Neutral treshold, default blue VOLUME LABELS : show volume labels    Volume labels color : color for the volume labels, default white    Volume Labels size : text size for the volume labels, choose between AUTO, TINY, SMALL, NORMAL or LARGE, default TINY TRACK PRICE : show a yellow ball tracking the last price, default true █  LIMITS This indicator only works on intraday charts (minutes only) up to 12H (720m), the lower chart timeframe you can use is 1m This indicator needs price, time and volume to work, it will not work on an index (there is no volume), the execution will not be allowed The histogram (volume profile) can be plotted on 24H sessions as limit but you can plot several 24H sessions █  ERRORS AND PERFORMANCE Depending on the choosed settings, the script performance will be highly affected and it will experience errors Two of the more common errors it can throw are:  • Calculation takes too long to execute  • Loop takes too long The indicator performance is highly related to the underlying volatility (tick wise), the script takes each candlestick or bar and for each tick in it stores the price and volume, if the ticker in your chart has thousands and thousands of ticks per bar the indicator will throw an error for sure, it can not calculate in time such amount of ticks. What all of that means? Simply put, this will throw error on the BITCOIN pair BTCUSD (high volatility with tick size 0.01) because it has too many ticks per bar, but lucky you it will work just fine on the futures contract BTC1! (tick size 5) because it has a lot less ticks per bar There are some options you can fine tune to boost the script performance, the more demanding option in terms of resources consumption is Updates per period , by default is maxed out so lowering this setting will improve the performance in a high way. If you wanna know more about how to improve the script performance, read the HELP INFO accessible from the settings panel █  HOW-TO SETUP The basic parameters to adjust are Period size , Ticks per bar and Pixels per bar  • Period size is the main setting, defines the waindrop size, to get a better looking histogram set bigger period and smaller chart timeframe  • Ticks per bar is the tricky one, adjust it differently for each underlying (ticker) volatility wise, for some you will need a low value, for others a high one.    To get a more accurate histogram set it as lower as you can (min value is 1)  • Pixels per bar allows you to adjust the width of each histogram bar, with it you can adjust the blank space between them or allow overlaping You must play with these three parameters until you obtain the desired histogram: smoother, sharper, etc... These are some of the different kind of charts you can setup thru the settings:  • Balanced Waindrops (default): charts with waindrops where the two halfs are of same size.    This is the default chart, just select a period (30m, 60m, 120m, 240m, pick your poison), adjust the histogram ticks and pixels and watch  • Unbalanced Waindrops: chart with waindrops where the two halfs are of different sizes.    Do you trade futures and want to plot a waindrop with the first half for the overnight session and the second half for the cash session? you got it;    just adjust the period to 1860 for any CME ticker (like ES1! for example) adjust the histogram ticks and pixels and watch  • Full Session Volume Profile: chart with waindrops where only the first half plots.    Do you use Volume profile to analize the market? Lucky you, now you can trick this one to plot it, just try a period of 780 on SPY, 2760 on ES1!, or 2880 on EURUSD    remember to adjust the histogram ticks and pixels for each underlying  • Only Bars: charts with only central and vwap bars plotted, simply deactivate the histogram and volume labels  • Only Histogram: charts with only the histogram plotted (volume profile charts), simply deactivate the bars and volume labels  • Only Volume: charts with only the raw volume numbers plotted, simply deactivate the bars and histogram If you wanna know more about custom full session periods for different asset classes, read the HELP INFO accessible from the settings panel EXAMPLES Full Session Volume Profile on MES 5m chart: Full Session Unbalanced Waindrop on MNQ 2m chart (left side Overnight session, right side Cash Session): The following examples will have the exact same charts but on four different tickers representing a futures contract, a forex pair, an etf and a stock. We are doing this to be able to see the different parameters we need for plotting the same kind of chart on different assets The chart composition is as follows:  • Left side: Volume Labels chart (period 10)  • Upper Right side: Waindrops (period 60)  • Lower Right side: Full Session Volume Profile The first example will specify the main parameters, the rest of the charts will have only the differences MES :  • Left: Period size: 10, Bars: uncheck, Histogram: uncheck, Execution window: 1, Ticks per bar: 2, Updates per period: EACH BAR,    Pixels per bar: 4, Volume labels: check, Track price: check  • Upper Right: Period size: 60, Bars: check, Bars color mode: HISTOGRAM, Histogram: check, Execution window: 2, Ticks per bar: 2,    Updates per period: EACH BAR, Pixels per bar: 4, Volume labels: uncheck, Track price: check  • Lower Right: Period size: 2760, Bars: uncheck, Histogram: check, Execution window: 1, Ticks per bar: 1, Updates per period: EACH BAR,    Pixels per bar: 2, Volume labels: uncheck, Track price: check EURUSD :  • Upper Right: Ticks per bar: 10  • Lower Right: Period size: 2880, Ticks per bar: 1, Pixels per bar: 1 SPY :  • Left: Ticks per bar: 3  • Upper Right: Ticks per bar: 5, Pixels per bar: 3  • Lower Right: Period size: 780, Ticks per bar: 2, Pixels per bar: 2 AAPL :  • Left: Ticks per bar: 2  • Upper Right: Ticks per bar: 6, Pixels per bar: 3  • Lower Right: Period size: 780, Ticks per bar: 1, Pixels per bar: 2 █  THANKS TO PineCoders for all they do, all the tools and help they provide and their involvement in making a better community scarf for the idea of coding a waindrops like indicator, I did not know something like that existed at all All the Pine Coders, Pine Pros and Pine Wizards, people who share their work and knowledge for the sake of it and helping others, I'm very grateful indeed I'm learning at each step of the way from you all, thanks for this awesome community; Opensource and shared knowledge: this is the way! (said with canned voice from inside my helmet :D) █  NOTE This description was formatted following THIS guidelines ═════════════════════════════════════════════════════════════════════════ I sincerely hope you enjoy reading and using this work as much as I enjoyed developing it :D GOOD LUCK AND HAPPY TRADING!
Pine Script® indicator
by makit0
107
VolumeHeatmap | Experimental Version of Marketorders MatrixDear all, I wish a Happy New Year! The last time I tried to developing a Volume Heatmap, that the Marketorders made. With the currently version I achieve my skills for that and I present it for everyone - some bugs I cannot solve today. It also possible to see the POC - also the dynamic of volume developing: The background for that is to find the pricelevel with the most volume - this is for valuetrading always the target. If someone find it useful or have question - let me know! Kind regards NXT2017
Pine Script® indicator
by NXT2017
96
Banabi Hacim by HassonyaThe Banabi Hacim indicator shows you the movement of volume in the last bar in terms of percentage buying and selling directions. You can use it in any period you want. It is designed to help you and give you ideas for buying or selling. It will be your assistant in critical places where you are thinking of buying or selling. Thanks for supports TÜRKÇE AÇIKLAMA Banabi Hacim indikatörü size son barda gerçekleşen işlem hacim hareketini yüzdesel olarak alış ve satış yönlü olarak gösterir. İstediğiniz periyotta kullanabilirsiniz. Alım yada satım yapmak için size yardımcı olmak ve fikir vermek için tasarlandı. Destekleriniz için teşekkürler Hayrını görün sevgiler
Pine Script® indicator
by Hassonya
79
Silen's Pseudo VPVR / Pseudo Volume Profile Custom RangeDisclamer: This indicator does not use actual Volume data and doesn't display any Volume data. It creates a pseudo Volume Profile by counting the high-low-2 values of candles and simulates something that is similar to a Volume Profile without using any Volume data. Core facts: Creates a pseudo Volume Profile by counting values of candles and sorting them into a Profile. Works for charts that don't provide any Volume Information. Can display up to 5 different Value Levels. Value level colors are (from largest to smallest level): Red, Orange, Yellow, Green, Blue. The Value levels can be used as Support and Resistance indicators. The Custom Range of the Volume Profile can be adjusted from 10 to 1500 bars. Much faster than the other custom pseudo VPVRs out there. Shortcomings: As the chart progresses with bars the line positions will distort to the left side. Refreshing the tradingview page or switching to another time interval fixes this. I might fix this issue in the future. Does not use actual Volume nor display actual Volume. Note: For those who wondered what happened to my first version of this indicator: It got taken down by Tradingview because it was misleading as to using the words "Volume Profile" and "Visible Range". I fully support their decision and I hope I could clear any misunderstandings! Give their team a heads up for the hard work they're doing in keeping this place clean and well organized! Enjoy! :)
Pine Script® indicator
by The_Silen
53
Volume ProfileThis is a Volume Profile based on pine script arrays. The main idea behind this script is from the user @IldarAkhmetgaleev . He created an awesome piece of code for free users on tradingview. Here are some changes to the main script: 0. Used Pine Script Arrays for doing/storing calculations. 1. The bar labels are replaced with lines. 2. Added a POC line. 3. Bar growing directions changed from right to left. 4. Added an option to change bar width. Inputs: 0. Volume Lookback Depth : Number of bars to look back for volume calculations. 1. Bar Length Multiplier : Bar length multiplier to make bar long or short. 2. Bar Horizontal Offset : Horizontal distance from the current bar in the right direction. 3. Bar Width : Width of the bars. 4. Show POC Line : Show or hide the POC line. Happy trading.
Pine Script® indicator
by kv4coins
134
Historic VPoCs and pseudo VPVRThis study tries to recreate session based historic VPoCs and VPVR Volume Profile as they are used by TradingLatino TradingView user. It's aimed at BTCUSDT pair and 4h timeframe. HOW IT WORKS HOW IT WORKS - VPVR Profile Block It gathers volume from the last chosen Bars in order to draw the vpvr profile block Volume that intersects with current level range being studied is added to its value. Additionally the current level price is modified so that it matches the level price where most of the volume has concentrated So you get a pretty accurate price for drawn volume while at the same time the levels are not stuck to arbitrary level prices. HOW IT WORKS - VPoC It calculates a Volume Profile for the given historic session but then it only outputs that Volume Profile VPoC. SETTINGS Show VPVR Volume Profile {True}. Show Historic VPoC lines {True}. Show Historic VPoC labels {True}. Extend Historic VPoC lines {True}: If this option is turned off the VPoC lines are only shown during the session duration. Show tick difference from current price {False}: BETA. Feedback is needed because I'm not sure how it should work this setting. VPVR Number of bars {100}: Define the Visible Range in number of bars so that its Volume Profile can be shown. VPVR Profile width (in bars) {15}: VPVR Profile can be make larger or smaller in width thanks to this option. VPVR Profile offset (in bars) {15}: VPVR Profile can be shown more to the left or to the right if the defaults do not suit you. Historic Session Volume Profile timeframe {1D}: Historic VPoC use 1 day as their timeframe reference by default. Number of decimal digits {2}: How many decimal digits are shown in label prices. Number of previous sessions to print VPoC {5}: How many previous sessions VPoCs are to be printed. The maximum for this setting is 20. Historic VPoC lines width (in pixels) {2}. Historic VPoC labels size {small}. History VPoC line offset (in bars) {5}: How far to the right VPoCs lines are to be extended. Note: This setting does not apply when 'Extend Historic VPoC lines' is set to 'False'. WARNING Please be aware that VPoC from the first previous session might not be accurate due to Pine Script limitations. VPVR USAGE This is not a VPVR like the official TradingView indicator. This is a pseudo VPVR and that means it needs some manual input from you. But, don't worry it's quite easy to do and if you always use the same number of bars to calculate your VPVR then you might even just set it up once. In order to show the VPVR (or Volume Profile on the Visible Range): Rescale your chart so that you see all the bars for your Visible Range. Click on the ruler tool. Click on the last bar (far to the right) shown on the screen Drag the ruler to first bar (far to the left) shown on the screen Check what the ruler says E.g. it says: 101 bars Open this study settings Modify: 'VPVR Number of bars ' setting So that its value matches your measured number of bars (101) Press OK to confirm and wait for the indicator to refresh. STRATEGY USAGE If your strategy uses VPoC to define your resistances or supports you can check the VPoCs shown here. FEEDBACK I have only used this identifier in BTCUSDT 4h timeframe. I'm interested to know what needs to be tweaked in other securities and timeframes. PINE STUDY TRICK This study let's you choose the number of decimals the label will use. CREDITS I have reused and adapted some code from 'Poor man's volume profile' study which it's from TradingView IldarAkhmetgaleev user. I also wanted to thank him for helping me understanding his study. I have reused some code from 'MTF Selection Framework - PineCoders FAQ' study which it's from TradingView PineCoders user.
Pine Script® indicator
by ruckard
16
Resistances and supports based on simplified Volume ProfileThis study tries to highlight support and resistances as they are defined by TradingLatino TradingView user His definition is based on volume peaks on the official TradingView Volume Profile indicator that seem rather big on size. As a bonus it also serves as a rather simple volume profile indicator. As you can see it only show last blocks volume profile. It's aimed at BTCUSDT pair and 4h timeframe. HOW IT WORKS HOW IT WORKS - Recent Profile Block It gathers volume from the last 100 Bars in order to draw the recent profile block Volume that intersects with current level range being studied is added to its value. Additionally the current level price is modified so that it matches the level price where most of the volume has concentrated So you get a pretty accurate way of the volume while at the same time the level are not stuck to arbitrary level prices. HOW IT WORKS - Resistances and Supports It calculates the level which its price it's nearer (from below) to the current price level Resistance is found steping up (from current prive level) level by level till you find a level which its value is higher than the previous level value. Support is found steping down (from current prive level) level by level till you find a level which its value is higher than the previous level value. That way you ignore rather small resistances and support values. Finally the resistances and supports are drawn next to the recent profile block so that you can look at them with ease. If you hover over the label you can double check if you are looking at current price, resistance or support levels. SETTINGS Bars in recent profile block : How many previous period volumes are used to calculate the recent profile block Row width multiplier : Adjust how big the recent profile block seems to be Resistances prices number of decimal digits : How many digits is shown at the resistance and support level prices. WARNING Please be aware that depending on your security and timeframe you might need to modify the 'Bars in recent profile block' setting so that the study does not timeout. USAGE If your strategy calculates take profit limits on higher resistances based on volume you could use this indicator resistance detector FEEDBACK 1 This is my first volume indicator. I suppose that each trader has his own approach on defining resistances and supports. I'm interested on knowing if the default way this resistances and supports are calculated matches what other traders would have highlighted manually on the chart. FEEDBACK 2 I have only used this identifier in BTCUSDT 4h timeframe. I'm interested to know what needs to be tweaked in other securities and timeframes. PINE STUDY TRICK This study let's you choose the number of decimals the label will use. CREDITS I have reused and adapted some code from 'Poor man's volume profile' study which it's from TradingView IldarAkhmetgaleev user. I also wanted to thank him for helping me understanding his study.
Pine Script® indicator
by ruckard
43
UCS_Trader Pressure Indicator -V1Welcoming everyone to a simple Indicator. I have used the volume of a stock to establish how commited the market for that particular ticker is when it comes to a direction. The idea behind the indicator is how much of commitment there is towards a move. *** This indicator is non directional*** ie., It just measures the commitment behind a move. Why is it important. Let's say we have a uptrending stock with low commitment (pressure), the bounce on any pullback will not be able carry that any further. So the pressure on the Pullback could drop the stock below and add additional risk. Only for us to wish and think, we checked that previously. Essentially, If a Trend is being established with a strong pressure (VOLUME BASED). It is more likely to continue. How you would use this is upto you. But general ideas in Some of these snapshots. Concluding - The trend in combination with TPI - Stronger Trend. In such stronger trends - A pullback (oppsing the trend) have higher probability to bounce. NOTE - Experiement with the indicator and Trade at your own risk This is a tool, not a system. Feedbacks are welcome and will be considered for improvement. Best Wishes
Pine Script® indicator
by UDAY_C_Santhakumar
12
VWAP y Standar DeviationThis script presents the real VWAP (Yellow line), in 50 period VWAP (Blue Line) and the 120 period VWAP (Red Line). Additionally, it presents the values ​​of 1 and 1,618 standard deviations of the VWAP of 50 periods. This confirmation allows to visualize the behavior of the price in realicon to the VWAP key indicator that represents the midpoint of the operating volumes in a period. This script evaluates the deviation of the price in relation to the average of the volume traded in the different periods. The indicator settings allow changing the length of the VWAP for custom settings. Standard deviations are determined based on VWAP 2. VWAP 1 is a reference for determining the global trend of movement in the established period. The upper and lower limits of the representative Standard Deviation of 1.618 (Fibonacci Number) are used as confirmation of continuation of a trend once crossed by the price. During the ranges the 1.618 limits of the Dev. Standard are used as entry and exit points of the operation (For this it is necessary to adjust the VWAP 2 to the studied temporality and the operated asset)
Pine Script® indicator
by suarezce
1
Bitcoin CME Gaps [NeoButane]Simple script that checks for gaps in price from CME. tickerid(x, y, sess) doesn't seem to be applying correctly for the ticker specified at the moment so there are a couple of 'gaps' peppered on lower timeframes. Gaps are legitimate price levels to look as a support or resistance. The theory is that volume needs to be gap filled, but I currently believe it's an easy entry/exit trade for those who can move the market. I don't think there is sound analysis behind the why, but it is real.
Pine Script® indicator
by NeoButane
5
Volume Profile [Makit0]VOLUME PROFILE INDICATOR v0.5 beta Volume Profile is suitable for day and swing trading on stock and futures markets, is a volume based indicator that gives you 6 key values for each session: POC, VAH, VAL, profile HIGH, LOW and MID levels. This project was born on the idea of plotting the RTH sessions Value Areas for /ES in an automated way, but you can select between 3 different sessions: RTH, GLOBEX and FULL sessions. Some basic concepts: - Volume Profile calculates the total volume for the session at each price level and give us market generated information about what price and range of prices are the most traded (where the value is) - Value Area (VA): range of prices where 70% of the session volume is traded - Value Area High (VAH): highest price within VA - Value Area Low (VAL): lowest price within VA - Point of Control (POC): the most traded price of the session (with the most volume) - Session HIGH, LOW and MID levels are also important There are a huge amount of things to know of Market Profile and Auction Theory like types of days, types of openings, relationships between value areas and openings... for those interested Jim Dalton's work is the way to come I'm in my 2nd trading year and my goal for this year is learning to daytrade the futures markets thru the lens of Market Profile For info on Volume Profile: TV Volume Profile wiki page at www.tradingview.com For info on Market Profile and Market Auction Theory: Jim Dalton's book Mind over markets (this is a MUST) BE AWARE: this indicator is based on the current chart's time interval and it only plots on 1, 2, 3, 5, 10, 15 and 30 minutes charts. This is the correlation table TV uses in the Volume Profile Session Volume indicator (from the wiki above) Chart Indicator 1 - 5 1 6 - 15 5 16 - 30 10 31 - 60 15 61 - 120 30 121 - 1D 60 This indicator doesn't follow that correlation, it doesn't get the volume data from a lower timeframe, it gets the data from the current chart resolution. FEATURES - 6 key values for each session: POC (solid yellow), VAH (solid red), VAL (solid green), profile HIGH (dashed silver), LOW (dashed silver) and MID (dotted silver) levels - 3 sessions to choose for: RTH, GLOBEX and FULL - select the numbers of sessions to plot by adding 12 hours periods back in time - show/hide POC - show/hide VAH & VAL - show/hide session HIGH, LOW & MID levels - highlight the periods of time out of the session (silver) - extend the plotted lines all the way to the right, be careful this can turn the chart unreadable if there are a lot of sessions and lines plotted SETTINGS - Session: select between RTH (8:30 to 15:15 CT), GLOBEX (17:00 to 8:30 CT) and FULL (17:00 to 15:15 CT) sessions. RTH by default - Last 12 hour periods to show: select the deph of the study by adding periods, for example, 60 periods are 30 natural days and around 22 trading days. 1 period by default - Show POC (Point of Control): show/hide POC line. true by default - Show VA (Value Area High & Low): show/hide VAH & VAL lines. true by default - Show Range (Session High, Low & Mid): show/hide session HIGH, LOW & MID lines. true by default - Highlight out of session: show/hide a silver shadow over the non session periods. true by default - Extension: Extend all the plotted lines to the right. false by default HOW TO SETUP BE AWARE THIS INDICATOR PLOTS ONLY IN THE FOLLOWING CHART RESOLUTIONS: 1, 2, 3, 5, 10, 15 AND 30 MINUTES CHARTS. YOU MUST SELECT ONE OF THIS RESOLUTIONS TO THE INDICATOR BE ABLE TO PLOT - By default this indicator plots all the levels for the last RTH session within the last 12 hours, if there is no plot try to adjust the 12 hours periods until the seesion and the periods match - For Globex/Full sessions just select what you want from the dropdown menu and adjust the periods to plot the values - Show or hide the levels you want with the 3 groups: POC line, VA lines and Session Range lines - The highlight and extension options are for a better visibility of the levels as POC or VAH/VAL THANKS TO @watsonexchange for all the help, ideas and insights on this and the last two indicators (Market Delta & Market Internals) I'm working on my way to a 'clean chart' but for me it's not an easy path @PineCoders for all the amazing stuff they do and all the help and tools they provide, in special the Script-Stopwatch at that was key in lowering this indicator's execution time All the TV and Pine community, open source and shared knowledge are indeed the best way to help each other IF YOU REALLY LIKE THIS WORK, please send me a comment or a private message and TELL ME WHAT you trade, HOW you trade it and your FAVOURITE SETUP for pulling out money from the market in a consistent basis, I'm learning to trade (this is my 2nd year) and I need all the help I can get GOOD LUCK AND HAPPY TRADING
Pine Script® indicator
by makit0
64
Volume Profile Free Ultra SLI (100 Levels Value Area VWAP) - RRBVolume Profile Free Ultra SLI by RagingRocketBull 2019 Version 1.0 This indicator calculates Volume Profile for a given range and shows it as a histogram consisting of 100 horizontal bars. This is basically the MAX SLI version with +50 more Pinescript v4 line objects added as levels. It can also show Point of Control (POC), Developing POC, Value Area/VWAP StdDev High/Low as dynamically moving levels. Free accounts can't access Standard TradingView Volume Profile, hence this indicator. There are several versions: Free Pro, Free MAX SLI, Free Ultra SLI, Free History. This is the Free Ultra SLI version. The Differences are listed below: - Free Pro: 25 levels, +Developing POC, Value Area/VWAP High/Low Levels, Above/Below Area Dimming - Free MAX SLI: 50 levels, 2x SLI modes for Buy/Sell or even higher res 150 levels - Free Ultra SLI: 100 levels, packed to the limit, 2x SLI modes for Buy/Sell or even higher res 300 levels - Free History: auto highest/lowest, historic poc/va levels for each session Features: - High-Res Volume Profile with up to 100 levels (line implementation) - 2x SLI modes for even higher res: 300 levels with 3x vertical SLI, 100 buy/sell levels with 2x horiz SLI - Calculate Volume Profile on full history - POC, Developing POC Levels - Buy/Sell/Total volume modes - Side Cover - Value Area, VAH/VAL dynamic levels - VWAP High/Low dynamic levels with Source, Length, StdDev as params - Show/Hide all levels - Dim Non Value Area Zones - Custom Range with Highlighting - 3 Anchor points for Volume Profile - Flip Levels Horizontally - Adjustable width, offset and spacing of levels - Custom Color for POC/VA/VWAP levels, Transparency for buy/sell levels WARNING: - Compilation Time: 1 min 20 sec Usage: - specify max_level/min_level/spacing (required) - select range (start_bar, range length), confirm with range highlighting - select volume type: Buy/Sell/Total - select mode Value Area/VWAP to show corresponding levels - flip/select anchor point to position the buy/sell levels - use Horiz Buy/Sell SLI mode with 100 or Vertical SLI with 300 levels if needed - use POC/Developing POC/VA/VWAP High/Low as S/R levels. Usually daily values from 1-3 days back are used as levels for the current day. SLI: use SLI modes to extend the functionality of the indicator: - Horiz Buy/Sell 2x SLI lets you view 100 Buy/Sell Levels at the same time - Vertical Max_Vol 3x SLI lets you increase the resolution to 300 levels - you need at least 2 instances of the indicator attached to the same chart for SLI to work 1) Enable Horiz SLI: - attach 2 indicator instances to the chart - make sure all instances have the same min_level/max_level/range/spacing settings - select volume type for each instance: you can have a buy/sell or buy/total or sell/total SLI. Make sure your buy volume instance is the last attached to be displayed on top of sell/total instances without overlapping. - set buy_sell_sli_mode to true for indicator instances with volume_type = buy/sell, for type total this is optional. - this basically tells the script to calculate % lengths based on total volume instead of individual buy/sell volumes and use ext offset for sell levels - Sell Offset is calculated relative to Buy Offset to stack/extend sell after buy. Buy Offset = Zero - Buy Length. Sell Offset = Buy Offset - Sell Length = Zero - Buy Length - Sell Length - there are no master/slave instances in this mode, all indicators are equal, poc/va levels are not affected and can work independently, i.e. one instance can show va levels, another - vwap. 2) Enable Vertical SLI: - attach the first instance and evaluate the full range to roughly determine where is the highest max_vol/poc level i.e. 0..20000, poc is in the bottom half (third, middle etc) or - add more instances and split the full vertical range between them, i.e. set min_level/max_level of each corresponding instance to 0..10000, 10000..20000 etc - make sure all instances have the same range/spacing settings - an instance with a subrange containing the poc level of the full range is now your master instance (bottom half). All other instances are slaves, their levels will be calculated based on the max_vol/poc of the master instance instead of local values - set show_max_vol_sli to true for the master instance. for slave instances this is optional and can be used to check if master/slave max_vol values match and slave can read the master's value. This simply plots the max_vol value - you can also attach all instances and set show_max_vol_sli to true in all of them - the instance with the largest max_vol should become the master Auto/Manual Ext Max_Vol Modes: - for auto vertical max_vol SLI mode set max_vol_sli_src in all slave instances to the max_vol of the master indicator: "VolumeProfileFree_MAX_RRB: Max Volume for Vertical SLI Mode". It can be tricky with 2+ instances - in case auto SLI mode doesn't work - assign max_vol_sli_ext in all slave instances the max_vol value of the master indicator manually and repeat on each change - manual override max_vol_sli_ext has higher priority than auto max_vol_sli_src when both values are assigned, when they are 0 and close respectively - SLI is disabled - master/slave max_vol values must match on each bar at all times to maintain proper level scale, otherwise slave's levels will look larger than they should relative to the master's levels. - Max_vol (red) is the last param in the long list of indicator outputs - the only true max_vol/poc in this SLI mode is the master's max_vol/poc. All poc/va levels in slaves will be irrelevant and are disabled automatically. Slaves can only show VWAP levels. - VA Levels of the master instance in this SLI mode are calculated based on the subrange, not the whole range and may be inaccurate. Cross check with the full range. WARNING! - auto mode max_vol_sli_src is experimental and may not work as expected - you can only assign auto mode max_vol_sli_src = max_vol once due to some bug with unhandled exception/buffer overflow in Tradingview. Seems that you can clear the value only by removing the indicator instance - sometimes you may see a "study in error state" error when attempting to set it back to close. Remove indicator/Reload chart and start from scratch - volume profile may not finish to redraw and freeze in an ugly shape after an UI parameter change when max_vol_sli_src is assigned a max_vol value. Assign it to close - VP should redraw properly, but it may not clear the assigned max_vol value - you can't seem to be able to assign a proper auto max_vol value to the 3rd slave instance - 2x Vertical SLI works and tested in both auto/manual, 3x SLI - only manual seems to work (you can have a mixed mode: 2nd instance - auto, 3rd - manual) Notes: - This code uses Pinescript v3 compatibility framework - This code is 20x-30x faster (main for cycle is removed) especially on lower tfs with long history - only 4-5 sec load/redraw time vs 30-60 sec of the old Pro versions - Instead of repeatedly calculating the total sum of volumes for the whole range on each bar, vol sums are now increased on each bar and passed to the next in the range making it a per range vs per bar calculation that reduces time dramatically - 100 levels consist of 50 main plot levels and 50 line objects used as alternate levels, differences are: - line objects are always shown on top of other objects, such as plot levels, zero line and side cover, it's not possible to cover/move them below. - all line objects have variable lengths, use actual x,y coords and don't need side cover, while all plot levels have a fixed length of 100 bars, use offset and require cover. - all key properties of line objects, such as x,y coords, color can be modified, objects can be moved/deleted, while this is not possible for static plot levels. - large width values cause line objects to expand only up/down from center while their length remains the same and stays within the level's start/end points similar to an area style. - large width values make plot levels expand in all directions (both h/v), beyond level start/end points, sometimes overlapping zero line, making them an inaccurate % length representation, as opposed to line objects/plot levels with area style. - large width values translate into different widths on screen for line objects and plot levels. - you can't compensate for this unwanted horiz width expansion of plot levels because width uses its own units, that don't translate into bars/pixels. - line objects are visible only when num_levels > 50, plot levels are used otherwise - Since line objects are lines, plot levels also use style line because other style implementations will break the symmetry/spacing between levels. - if you don't see a volume profile check range settings: min_level/max_level and spacing, set spacing to 0 (or adjust accordingly based on the symbol's precision, i.e. 0.00001) - you can view either of Buy/Sell/Total volumes, but you can't display Buy/Sell levels at the same time using a single instance (this would 2x reduce the number of levels). Use 2 indicator instances in horiz buy/sell sli mode for that. - Volume Profile/Value Area are calculated for a given range and updated on each bar. Each level has a fixed length. Offsets control visible level parts. Side Cover hides the invisible parts. - Custom Color for POC/VA/VWAP levels - UI Style color/transparency can only change shape's color and doesn't affect textcolor, hence this additional option - Custom Width - UI Style supports only width <= 4, hence this additional option - POC is visible in both modes. In VWAP mode Developing POC becomes VWAP, VA High and Low => VWAP High and Low correspondingly to minimize the number of plot outputs - You can't change buy/sell level colors from input (only transparency) - this requires 2x plot outputs => 2x reduces the number of levels to fit the max 64 limit. That's why 2 additional plots are used to dim the non Value Area zones - You can change level transparency of line objects. Due to Pinescript limitations, only discrete values are supported. - Inverse transp correlation creates the necessary illusion of "covered" line objects, although they are shown on top of the cover all the time - If custom lines_transp is set the illusion will break because transp range can't be skewed easily (i.e. transp 0..100 is always mapped to 100..0 and can't be mapped to 50..0) - transparency can applied to lines dynamically but nva top zone can't be completely removed because plot/mixed type of levels are still used when num_levels < 50 and require cover - transparency can't be applied to plot levels dynamically from script this can be done only once from UI, and you can't change plot color for the past length bars - All buy/sell volume lengths are calculated as % of a fixed base width = 100 bars (100%). You can't set show_last from input to change it - Range selection/Anchoring is not accurate on charts with time gaps since you can only anchor from a point in the future and measure distance in time periods, not actual bars, and there's no way of knowing the number of future gaps in advance. - Adjust Width for Log Scale mode now also works on high precision charts with small prices (i.e. 0.00001) - in Adjust Width for Log Scale mode Level1 width extremes can be capped using max deviation (when level1 = 0, shift = 0 width becomes infinite) - There's no such thing as buy/sell volume, there's just volume, but for the purposes of the Volume Profile method, assume: bull candle = buy volume, bear candle = sell volume P.S. I am your grandfather, Luke! Now, join the Dark Side in your father's steps or be destroyed! Once more the Sith will rule the Galaxy, and we shall have peace...
Pine Script® indicator
by RagingRocketBull
111