Get started
TEXAS INC DRNTEXAS INC DRNTEXAS INC DRN

TEXAS INC DRN

No trades
See on Supercharts
Overview Financials News
Ideas
Discussions Technicals Seasonals Bonds

TEXA34 trade ideas

TXN bull flag Ride the Trend!Sector performing strong -Long term trend is bullish with strength slightly weakening but still in uptrend...consolidation -intermediate time frame showing a nice flag forming after that sharp quick advance finding support in the 80.18 area -relative strength is slowing showing a nice pullback -the real tell is the obv which is showing the positive volume pressure going into the move -measured move of around 2.50 brings target to 82.7-82.75 but realistically to 82.20 area following the path of least resistance -risk reward ratio= 10.95
NASDAQ:TXNLong
by inco1
BABA '14 vs TXN '00Comparing the current BABA crash with the TXN crash of 2000. What's really interesting is that BABA has made a new low from the lows around the IPO. TXN went and tested the leg start from its IPO. I'm looking to see if the BABA bear flag breaks to the downside, or if this is accumulation, where we would see bearish momo being offset to pop back to big support lost. This would then become a bear trap. But I'm really curious now, because we made a new low. If the BABA bear flag breaks to the downside and holds below 80, I have a target in the 60s.
NASDAQ:TXN
by TradeVulture
1
TXN channels updated from previous publishedThere are overlapping numbers because there is more than one channel size. The key idea is one channel size keeps it's VERTICAL distance always. From 1 to 1p or visa versa remains a constant distance no matter what the angle of the channel. The 2nd thing is, when a channel breaks into future data then you have to go back to a reset point so the channel follows the edges of the data and doesn't break through it. (usually key bottoms or tops are the set points). This method is very accurate IF you can determine the correct LEAD or 2L point...which is harder than you think. T=top B=bottom. The formations are bbt, btb, btt, ttb, tbt, tbb. Three point hits in a channel is what you are looking for. Sometimes there are 4 bounces in a channel (from one side to the other) instead of 3. The 2 best formations are bbt and ttb. They are usually steep moves and the 2L or lead points are usually set close to the starting 1 or 1p. There are other channel ideas that I have published. This is the method that I trust the most.
NASDAQ:TXN
by Robert24
TXN and arc distances, angle speeds and channel angleThe reason angles hang in the air and don't make it to the bottom of the channel is because the arc distance is right, but the angle speed is TOO SLOW to make it continue to the bottom. That's why you'll see overlaps at the vertical posts. Notice the posts go through several arc distances. If the arc distance is right, but no speed the channel bottom can't be made. On the other hand the larger arc distance does make it to the bottom of the channel with that slower speed. Just look at the VERTICAL intersections through the arcs. Where the VERTICALS intersect is why the angle stopped there.. and some angles hang in mid air or mid channel. This idea is like Gann squares with the arcs intersecting the squares. The problem is every chart has specific arc distances and angles speeds. I find the best results are by first finding ellipses that hit at least 2 points on the same arc, then from the same ellipse center I try for other distances where there are multiple hits on a larger arc. Once I find consistency in points hitting multiple arc distances ALL from the SAME CENTER point. Then I rescale the chart into a circle. The projection tool can be overlaid to see if the circle has the proper circular shape. Once everything is in order. The Fib wedges can be used. They always draw a perfect arc. Just clone the arc sizing to reuse it elsewhere. An easy way to set this up would probably be to find the right arc distance, then draw a horizontal trend line on the chart, the same as the arc distance as a reference point. Just lay the fib wedge over the horizontal line and it's specific distance to reuse the arc distance. So you have 3 correlations to help find a possible reversal point. 1. The channel distance across (the channel angle should have a lead point to set it's angle 1st). 2. Common angle speeds that reoccur across the chart ( there are usually only 2 or 3 main angle speeds) 3. Arc distances (stick to the sizing that is closer to the move you are looking at). Although I do look to see if other distances from a center also line up. If everything worked out...and you're lucky and have good sense of general direction and angle speed, then it's possible to nail the point. I did this on EURCAD mostly with the channel sizing. The angle was off, but the channel height was right. On the other hand coming down, my arc distance was right, the channel distance right, but the speed was off. I missed the top by 6 pips and the bottom by 45 pips. Now don't expect THAT one every time, but I think these correlations between angles, arcs, and channel sizes help the accuracy.
NASDAQ:TXN
by Robert24