Get started

Signals

Entry Fragger - Strategy For basic instructions please visit my other script "Entry Fragger". The Signal Logic is explained there. v1.4: - Added advanced backtesting with fully customizable entries. - Fully automated Buy Signals (profitable). - Adjustable timeframes for signal logic. (requested) Every setting affects the accuracy and profitability greatly now, based on settings applied. The strategy performs best on high timeframes with larger capital and no leverage. Useless for Forex, but absolutely smashes stocks and crypto on mid to high timeframes. Please read through my other scripts description. Set values as preferred and try your assets. It does NOT work on low timeframes and forex! Hint: BTC 4H, Custom Timeframe 1h, Moon Mode and Show Sell Signals enabled, R2R: 2.
Pine Script™ strategy
by ppx10
Octopus Nest Strategy Hello Fellas, Hereby, I come up with a popular strategy from YouTube called Octopus Nest Strategy. It is a no repaint, lower timeframe scalping strategy utilizing PSAR, EMA and TTM Squeeze. The strategy considers these market factors: PSAR -> Trend EMA -> Trend TTM Squeeze -> Momentum and Volatility by incorporating Bollinger Bands and Keltner Channels Note: As you can see there is a potential improvement by incorporating volume. What's Different Compared To The Original Strategy? I added an option which allows users to use the Adaptive PSAR of @loxx, which will hopefully improve results sometimes. Signals Enter Long -> source above EMA 100, source crosses above PSAR and TTM Squeeze crosses above 0 Enter Short -> source below EMA 100, source crosses below PSAR and TTM Squeeze crosses below 0 Exit Long and Exit Short are triggered from the risk management. Thus, it will just exit on SL or TP. Risk Management "High Low Stop Loss" and "Automatic High Low Take Profit" are used here. High Low Stop Loss: Utilizes the last high for short and the last low for long to calculate the stop loss level. The last high or low gets multiplied by the user-defined multiplicator and if no recent high or low was found it uses the backup multiplier. Automatic High Low Take Profit: Utilizes the current stop loss level of "High Low Stop Loss" and gets calculated by the user-defined risk ratio. Now, follows the bunch of knowledge for the more inexperienced readers. PSAR: Parabolic Stop And Reverse; Developed by J. Welles Wilders and a classic trend reversal indicator. The indicator works most effectively in trending markets where large price moves allow traders to capture significant gains. When a security’s price is range-bound, the indicator will constantly be reversing, resulting in multiple low-profit or losing trades. TTM Squeeze: TTM Squeeze is a volatility and momentum indicator introduced by John Carter of Trade the Markets (now Simpler Trading), which capitalizes on the tendency for price to break out strongly after consolidating in a tight trading range. The volatility component of the TTM Squeeze indicator measures price compression using Bollinger Bands and Keltner Channels. If the Bollinger Bands are completely enclosed within the Keltner Channels, that indicates a period of very low volatility. This state is known as the squeeze. When the Bollinger Bands expand and move back outside of the Keltner Channel, the squeeze is said to have “fired”: volatility increases and prices are likely to break out of that tight trading range in one direction or the other. The on/off state of the squeeze is shown with small dots on the zero line of the indicator: red dots indicate the squeeze is on, and green dots indicate the squeeze is off. EMA: Exponential Moving Average; Like a simple moving average, but with exponential weighting of the input data. Don't forget to check out the settings and keep it up. Best regards, simwai --- Credits to: @loxx @Bjorgum @Greeny
Pine Script™ strategy
by simwai
14
YinYang RSI Volume Trend StrategyThere are many strategies that use RSI or Volume but very few that take advantage of how useful and important the two of them combined are. This strategy uses the Highs and Lows with Volume and RSI weighted calculations on top of them. You may be wondering how much of an impact Volume and RSI can have on the prices; the answer is a lot and we will discuss those with plenty of examples below, but first… How does this strategy work? It’s simple really, when the purchase source crosses above the inner low band (red) it creates a Buy or Long. This long has a Trailing Stop Loss band (the outer low band that's also red) that can be adjusted in the Settings. The Stop Loss is based on a % of the inner low band’s price and by default it is 0.1% lower than the inner band’s price. This Stop Loss is not only a stop loss but it can also act as a Purchase Available location. You can get back into a trade after a stop loss / take profit has been hit when your Reset Purchase Availability After condition has been met. This can either be at Stop Loss, Entry or None. It is advised to allow it to reset in case the stop loss was a fake out but the call was right. Sometimes it may trigger stop loss multiple times in a row, but you don’t lose much on stop loss and you gain lots when the call is right. The Take Profit location is the basis line (white). Take Profit occurs when the Exit Source (close, open, high, low or other) crosses the basis line and then on a different bar the Exit Source crosses back over the basis line. For example, if it was a Long and the bar’s Exit Source closed above the basis line, and then 2 bars later its Exit Source closed below the basis line, Take Profit would occur. You can disable Take Profit in Settings, but it is very useful as many times the price will cross the Basis and then correct back rather than making it all the way to the opposing zone. Longs: If for instance your Long doesn’t need to Take Profit and instead reaches the top zone, it will close the position when it crosses above the inner top line (green). Please note you can change the Exit Source too which is what source (close, open, high, low) it uses to end the trades. The Shorts work the same way as the Long but just opposite, they start when the purchase source crosses under the inner upper band (green). Shorts: Shorts take profit when it crosses under the basis line and then crosses back. Shorts will Stop loss when their outer upper band (green) is crossed with the Exit Source. Short trades are completed and closed when its Exit Source crosses under the inner low red band. So, now that you understand how the strategy works, let’s discuss why this strategy works and how it is profitable. First we will discuss Volume as we deem it plays a much bigger role overall and in our strategy: As I’m sure many of you know, Volume plays a huge factor in how much something moves, but it also plays a role in the strength of the movement. For instance, let’s look at two scenarios: Bitcoin’s price goes up $1000 in 1 Day but the Volume was only 10 million Bitcoin’s price goes up $200 in 1 Day but the Volume was 40 million If you were to only look at the price, you’d say #1 was more important because the price moved x5 the amount as #2, but once you factor in the volume, you know this is not true. The reason why Volume plays such a huge role in Price movement is because it shows there is a large Limit Order battle going on. It means that both Bears and Bulls believe that price is a good time to Buy and Sell. This creates a strong Support and Resistance price point in this location. If we look at scenario #2, when there is high volume, especially if it is drastically larger than the average volume Bitcoin was displaying recently, what can we decipher from this? Well, the biggest take away is that the Bull’s won the battle, and that likely when that happens we will see bullish movement continuing to happen as most of the Bears Limit Orders have been fulfilled. Whereas with #2, when large price movement happens and Bitcoin goes up $1000 with low volume what can we deduce? The main takeaway is that Bull’s pressured the price up with Market Orders where they purchased the best available price, also what this means is there were very few people who were wanting to sell. This generally dictates that Whale Limit orders for Sells/Shorts are much higher up and theres room for movement, but it also means there is likely a whale that is ready to dump and crash it back down. You may be wondering, what did this example have to do with YinYang RSI Volume Trend Strategy? Well the reason we’ve discussed this is because we use Volume multiple times to apply multiplications in our calculations to add large weight to the price when there is lots of volume (this is applied both positively and negatively). For instance, if the price drops a little and there is high volume, our strategy will move its bounds MUCH lower than the price actually dropped, and if there was low volume but the price dropped A LOT, our strategy will only move its bounds a little. We believe this reflects higher levels of price accuracy than just price alone based on the examples described above. Don’t believe us? Here is with Volume NOT factored in (VWMA = SMA and we remove our Volume Filter calculation): Which produced -$2880 Profit Here is with our Volume factored in: Which produced $553,000 (55.3%) As you can see, we wen’t from $-2800 profit with volume not factored to $553,000 with volume factored. That's quite a big difference! (Please note previous success does not predict future success we are simply displaying the $ amounts as example). Now how about RSI and why does it matter in this strategy? As I’m sure most of you are aware, RSI is one of the leading indicators used in trading. For this reason we figured it would only make sense to incorporate it into our calculations. We fiddled with RSI for quite awhile and sometimes what logically seems to be the right way to use it isn’t. Now, because of this, our RSI calculation is a little odd, but basically what we’re doing is we calculate the RSI, then turn it into a percentage (between 0-1) that can easily be multiplied to the price point we need. The price point we use is the difference between our high purchase zone and our low purchase zone. This allows us to see how much price movement there is between zones. We multiply our zone size with our RSI multiplication and we get the amount we will add +/- to our basis line (white line). This officially creates the NEW high and low purchase zones that we are actually using and displaying in our trades. If you found that confusing, here are some examples to why it is an important calculation for this strategy: Before RSI factored in: Which produced 27.8% Profit After RSI factored in: Which produced 553% Profit As you can see, the RSI makes not only the purchase zones more accurate, but it also greatly increases the profit the strategy is able to make. It also helps ensure an relatively linear profit slope so you know it is reliable with its trades. This strategy can work on pretty much anything, but you should tweak the values a bit for each pair you are trading it with for best results. We hope you can find some use out of this simple but effective strategy, if you have any questions, comments or concerns please let us know. HAPPY TRADING!
Pine Script™ strategy
by YinYangAlgorithms
11
Boftei's StrategyI wrote this strategy about a year ago, but decided to publish it just now. I have not been able to implement this strategy in the market. If you can, then I will be happy for you. This strategy is based on my "Botvenko Script". (It finds the difference between the logarithms of closing prices from different days.) (Check this script in my profile) Then the strategy makes trades when the "Botvenko Script" indicator crosses the levels set earlier and manually selected for each currency pair/shares: long/short opening/closing levels, long/short re-entry levels. (They are drawn with horizontal dotted lines.) The names of these lines are: buy/sell level, long/short retry - too low/high, long close up/down, dead - close the short. Manual selection of each of the parameters provides a qualitative entry of the strategy into the deal. However, without restraining mechanisms, the strategy enters into rather controversial deals. In order to avoid going long/short during bear/bull markets, which is unacceptable, I added a fan of EMA lines. The fan consists of several EMA lines, which are set according to Fibonacci numbers (21, 55, 89, 144). If the lines in the fan are arranged in ascending order (ema_21>ema_55 and ema_55>ema_89 and ema_89>ema_144), then this indicates a bull market, during which I banned shorting. And vice versa: during the bear market (ema_21<ema_55 and ema_55<ema_89 and ema_89<ema_144) I banned long trading. If these two inequalities are not met, then this indicates that the market is flat, and during it it is allowed to enter any transactions, because a flat is a good moment to catch massive movements in the future by entering a transaction. (This is all visualized using semi-transparent thick lines of green, yellow and red colors.) By default, all parameters are adjusted for the btc/usd (bitstamp) pair. Best of all, the strategy shows itself if 1 candle = 1 day. At the time of writing, on the pair btcusd (bitstamp) (1d) with pyramiding = 1, the strategy shows a profit of 64728896%. If pyramiding is increased by 1, then the profit will be greater, but I still prefer pyramiding = 1. There is a possibility that my strategy is doing complete nonsense. I don't vouch for her. If you select parameters for other pairs of currencies/stocks, then you should not change anything in the fan of lines. That's all, probably.
Pine Script™ strategy
by boftei
1
SuperTrend Multi Time Frame Long and Short Trading Strategy Hello All This is non-repainting Supertrend Multi Time Frame script, I got so many request on Supertrend with Multi Time Frame. This is for all of them ..I am making it open for all so you can change its coding according to your need. How the Basic Indicator works SuperTrend is one of the most common ATR based trailing stop indicators. In this version you can change the ATR calculation method from the settings. Default method is RMA. The indicator is easy to use and gives an accurate reading about an ongoing trend. It is constructed with two parameters, namely period and multiplier. The default values used while constructing a Supertrend indicator are 10 for average true range or trading period and three for its multiplier. The average true range (ATR) plays an important role in 'Supertrend' as the indicator uses ATR to calculate its value. The ATR indicator signals the degree of price volatility . The buy and sell signals are generated when the indicator starts plotting either on top of the closing price or below the closing price. A buy signal is generated when the ‘Supertrend’ closes above the price and a sell signal is generated when it closes below the closing price. It also suggests that the trend is shifting from descending mode to ascending mode. Contrary to this, when a ‘Supertrend’ closes above the price, it generates a sell signal as the colour of the indicator changes into red. A ‘Supertrend’ indicator can be used on spot, futures, options or forex, or even crypto markets and also on daily, weekly and hourly charts as well, but generally, it fails in a sideways-moving market. How the Strategy works This is developed based on SuperTrend. Use two time frame for confirm all entry signals. Two time frame SuperTrend works as Trailing stop for both long and short positions. More securely execute orders, because it is wait until confine two time frames(example : daily and 30min) Each time frame developed as customisable for user to any timeframe. User can choose trading position side from Long, Short, and Both. Custom Stop Loss level, user can enter Stop Loss percentage based on timeframe using. Multiple Take Profit levels with customisable TP price percentage and position size. Back-testing with custom time frame. This strategy is develop for specially for automation purpose. The strategy includes: Entry for Long and Short. Take Profit. Stop Loss. Trailing Stop Loss. Position Size. Exit Signal. Risk Management Feature. Backtesting. Trading Alerts. Use the strategy with alerts This strategy is alert-ready. All you have to do is: Go on a pair you would like to trade Create an alert Select the strategy as a Trigger Wait for new orders to be sent to you This is develop for specially for automating trading on any exchange, if you need to get that automating service for this strategy or any Tradingview strategy or indicator please contact me I am have 8 year experience on that field. I hope you enjoy it! Thanks, Ranga
Pine Script™ strategy
by ranga_technologies
16
GT 5.1 Strategy═════════════════════════════════════════════════════════════════════════ █ OVERVIEW People often look an indicator in their technical analysis to enter a position. We may also need to look at the signals of one or more indicators to verify the signals given by some indicators. In this context, I developed a strategy to test whether it really works by choosing some of the indicators that capture trend changes with the same characteristics. Also, since the subject is to catch the trend change, I thought it would be right to include an indicator using the heikin ashi logic. By averaging and smoothing the market noise, Heiken Ashi makes it easier to detect the direction of the trend helps to see possible reversal points on the chart. However, it should be noted that Heiken Ashi is a lagging indicator. I picked 5 different indicators (but their purpose are similar) and combined them to produce buy and sell signals based on your choice(not repaint). First of all let's get some information about our indicators. So you will understand me why i picked these indicators and what is the meaning of their signals. 1 — Coral Trend Indicator by LazyBear Coral Trend Indicator is a linear combination of moving averages, all obtained by a triple or higher order exponential smoothing. The indicator comes with a trend indication which is based on the normalized slope of the plot. the usage of this indicator is simple. When the color of the line is green that means the market is in uptrend. But when the color is red that means the market is in downtrend. As you see the original indicator it is simple to find is it in uptrend or downtrend. So i added a code to find when the color of the line change. When it turns green to red my script giving sell signals, when it turns red to green it gives buy signals. I hide the candles to show you more clearly what is happening when you choose only Coral Strategy. But sometimes it is not enough only using itself. Even if green dots turn to red it continues in uptrend. So we need a to look another indicator to approve our signal. 2 — SSL channel by ErwinBeckers Known as the SSL , the Semaphore Signal Level channel is an indicator that combines moving averages to provide you with a clear visual signal of price movement dynamics. In short, it's designed to show you when a price trend is forming. This indicator creates a band by calculating the high and low values ​​according to the determined period. Simply if you decide 10 as period, it calculates a 10-period moving average on the latest 10 highs. Calculate a 10-period moving average on the latest 10 lows. If the price falls below the low band, the downtrend begins, if the price closes above the high band, the uptrend begins. Lets look the original form of indicator and learn how it using. If the red line is below and the green band is above, it means that we are in uptrend, and if it is on the opposite side, it means that we are in downtrend. Therefore, it would be logical to enter a position where the trend has changed. So i added a code to find when the crossover has occured. As you see in my strategy, it gives you signals when the trend has changed. But sometimes it is not enough only using this indicator itself. So lets look 2 indicator together in one chart. Look circle SSL is saying it is in downtrend but Coral is saying it has entered in uptrend. if we just look to coral signal it can misleads us. So it can be better to look another indicator for validating our signals. 3 — Heikin Ashi RSI Oscillator by JayRogers The Heikin-Ashi technique is used by technical traders to identify a given trend more easily. Heikin-Ashi has a smoother look because it is essentially taking an average of the movement. There is a tendency with Heikin-Ashi for the candles to stay red during a downtrend and green during an uptrend, whereas normal candlesticks alternate color even if the price is moving dominantly in one direction. This indicator actually recalculates the RSI indicator with the logic of heikin ashi. Due to smoothing, the bars are formed with a slight lag, reflecting the trend rather than the exact price movement. So lets look the original version to understand more clearly. If red bars turn to green bars it means uptrend may begin, if green bars turn to red it means downtrend may begin. As you see HARSI giving lots of signal some of them is really good but some of them are not very well. Because it gives so much signals Now i will change time period and lets look same chart again. Now results are better because of heikin ashi's logic. it is not suitable for day traders, it gives more accurate result when using the time period is longer. But it can be useful to use this indicator in short time periods using with other indicators. So you may catch the trend changes more accurately. 4 — MACD DEMA by ToFFF This indicator uses a double EMA and MACD algorithm to analyze the direction of the trend. Though it might seem a tough task to manage the trades with the help of MACD DEMA once you know how the proper way to interpret the signal lines, it will be an easy task. This indicator also smoothens the signal lines with the time series algorithm which eventually makes the higher time frame important. So, expecting better results in the lower time frame can result in big losses as the data reading from the MACD DEMA will not be accurate. In order to understand the function of this indicator, you have to know the functions of the EMA also. The exponential moving average tends to give more priority to the recent price changes. So, expecting better results when the volatility is very high is a very risky approach to trade the market. Moreover, the MACD has some lagging issues compared to the EMA, so it is super important to use a trading method that focuses on the higher time frame only. What does MACD 12 26 Close 9 mean? When the DEMA-9 crosses above the MACD(12,26), this is considered a bearish signal. It means the trend in the stock – its magnitude and/or momentum – is starting to shift course. When the MACD(12,26) crosses above the DEMA-9, this is considered a bullish signal. Lets see this indicator on Chart. When the blue line crossover red line it is good time to buy. As you see from the chart i put arrows where the crossover are appeared. When the red line crossover blue line it is good time to sell or exit from position. 5 — WaveTrend Oscillator by LazyBear This is a technical indicator that creates high and low bands between two values. It then creates a trend indicator that draws waves with highs and lows within these boundaries. WaveTrend is a widely used indicator for finding direction of an asset. Calculation period: number of candles used to calculate WaveTrend, defaults to 10. Averaging period: number of candles used to average WaveTrend, defaults to 21. As you see in chart when the lines crossover occured my strategy gives buy or sell signals. ═════════════════════════════════════════════════════════════════════════ █ HOW TO USE I hope you understand how the indicators I mentioned above work and what they are used for. Now, I will explain in detail how to use the strategy I have created. When you enter the settings section, you will see 5 types of indicators. If you want to use the signals of the indicators, simply tick the box next to the indicators. Also, under each option there is an area where you can set the "lookback". This setting is a field that will make the signals overlap when you select more than one option. If you are going to trade with only one option, you should make sure that this field is 0. Otherwise, it may continue to generate as many signals as you choose. Lets see in chart for easy understanding. As you see chart, if i chose only HARSI with lookback 0 (HARSI and CORAL should be 1 minumum because of algorithm-we looking 1 bar before, others 0 because we are looking crossovers), it will give signals only when harsı bar's color changed. But when i changed Lookback as 7 it will be like this in chart. Now i will choose 2 indicator with settings of their lookback 0. As you see it will give signals when both of them occurs same time. But HARSI is an indicator giving very early signal so we can enter position 5-6 bars after the first bar color change. So i will change HARSI Lookback settings as 7. Lets look what happens when we use lookback option. So it wil be useful to change lookback settings to find best signals in each time period and in each symbol. But it shouldnt be too high. Because you can be late to catch trend's starting. this is an image of MACD and WAVE trend used and lookback option are both 6. Now lets see an example with 3 options are chosen with lookback option 11-1-5 Now lets talk about indicators settings. After strategy options you will see each indicators settings, you can change their settings as you desired. So each indicators signal will be changed according to your adjustment. I left strategy options with default settings. You can change it manually as if you want. ═════════════════════════════════════════════════════════════════════════ █  LIMITATIONS: Don't rely on non-standard charts results. For example Heikin Ashi is a technical analysis method used with the traditional candlestick chart.Heikin Ashi vs. Candlestick Chart: The decisive visual difference between Heikin Ashi and the traditional chart is that Heikin Ashi flattens the traditional candlestick chart using a modified formula. The primary advantage of Heikin Ashi is that it makes the chart more reader-friendly and helps users identify and analyze trends . Because Heikin Ashi provides averaged price information rather than real-time price and reacts slowly to volatility — not suitable for scalpers and high-frequency traders. I added HARSI indicator as a supportive signal because it is useful with using CORAL and SSL channel indicators. If you change your candle types to Heikin Ashi , your profit will change in good way but dont rely on it. ═════════════════════════════════════════════════════════════════════════ █  THANKS: Special thanks to authors of the scripts that i used. @LazyBear and @ErwinBeckers and @JayRogers and @ToFFF ═════════════════════════════════════════════════════════════════════════ █  DISCLAIMER Any trade decisions you make are entirely your own responsibility.
Pine Script™ strategy
by iori86
2
Combo 2/20 EMA & Average True Range Reversed This is combo strategies for get a cumulative signal. First strategy This indicator plots 2/20 exponential moving average. For the Mov Avg X 2/20 Indicator, the EMA bar will be painted when the Alert criteria is met. Second strategy Average True Range Trailing Stops Strategy, by Sylvain Vervoort The related article is copyrighted material from Stocks & Commodities Jun 2009 Please, use it only for learning or paper trading. Do not for real trading. WARNING: - For purpose educate only - This script to change bars colors.
Pine Script™ strategy
by HPotter
1
Combo 2/20 EMA & ADXR This is combo strategies for get a cumulative signal. First strategy This indicator plots 2/20 exponential moving average. For the Mov Avg X 2/20 Indicator, the EMA bar will be painted when the Alert criteria is met. Second strategy The Average Directional Movement Index Rating (ADXR) measures the strength of the Average Directional Movement Index (ADX). It's calculated by taking the average of the current ADX and the ADX from one time period before (time periods can vary, but the most typical period used is 14 days). Like the ADX, the ADXR ranges from values of 0 to 100 and reflects strengthening and weakening trends. However, because it represents an average of ADX, values don't fluctuate as dramatically and some analysts believe the indicator helps better display trends in volatile markets. WARNING: - For purpose educate only - This script to change bars colors.
Pine Script™ strategy
by HPotter
1
Hourly Bias on BTC in Bullish USA Session “Green Eagle”Name: Hourly Bias on BTC in Bullish USA Session Category: Hourly Bias Operating mode: Spot, only long Trades duration: Intraday, 11 bars Timeframe: 1H Suggested usage: When the market is compressed, USA session has a bullish bias. Entry: enter Long at 15:00 on specific days of the week. There is a volatility filter based on ATR which identifies compression. Exit: exit at a pre-defined time at 01:00 Usage: ⁃ It can be useful to use alerts or webhooks to automate this strategy. ⁃ This is a core system that can be improved in different ways (e.g. Stop-loss, take-profit, position sizing) or studying more the behaviour in the specific days of the week or short when is red. Configuration: - N/A Backtesting ⁃ Exchange: BINANCE ⁃ Pair: BTCUSDT ⁃ Timeframe: 1H ⁃ Fee 0.075% ⁃ Slippage 2 - Start : 2019-01-06 We decided to release this free BTC strategy. How you or we can improve? Source code is open so share your ideas!
Pine Script™ strategy
by TheSocialCryptoClub
1
MACD Signal with RSI Indicating StrategyThis strategy looks for MACD signal crossover and RSI confirmation of oversold/overbought condition. Tune to your crypto/stock for best results using the strategy and sent an alert. Currently set up to use 25% of equity at each buy signal and will sell 1/3 of position at each sell signal. Initial investment is $1000, but adjust as necessary. Currently tuned to DOGEUSD on 30min chart. If you like/use/profit, follow me or shoot me a donation. If you are looking for a script design, I can help.
Pine Script™ strategy
by cryptostang23
15
Simple way to BEAT the market [STRATEGY]This script has been created to demonstrate the effectiveness of using market regime filters in your trading strategy, and how they can improve your returns and lower your drawdowns This strategy adds a simple filter (A historical volatility percentile filter, an implementation of which can be found on my trading profile) to a traditional buy and hold strategy of the index SPY. Note, There are other filters that could also be added including a long-term moving average/percentile rank filter/ADX filter etc, to improve the returns further. The filter closes our long position during periods of volatility that exceed the 95th percentile (or in the top 5% of volatile days) and buys back when the volatility is below 95% rank of the past 100 days Have included the backtest results since 1993 which is 28 years of data at the time of writing. Comparison of traditional buy and hold with this modified strategy can be found below: Traditional buy and hold: Return per year: 7.95 % (ex Dividends) Total return: 851.1 % Max drawdown: 50.79 % 'Modified' buy and hold (this script): Return per year: 9.92 % (ex Dividends) Total return: 1412.2 % Max drawdown: 31.57 % Feel free to use some of the market filters in my trading profile to improve and refine your strategies further, or make a copy and play around with the code yourself. This is just a simple example for demo purposes.
Pine Script™ strategy
by TraderHalai
2
Super Guppy StrategyCM Super Guppy with Long/Short signals, backtesting, and additional options. Updated for PineScript v4. COINBASE:BTCUSD Features 2 primary modes, depending on your risk profile. These options are available in the settings: "Early Signals" ON (default): Prints a "long" on grey to green transitions AND red to gray transitions. Prints a "short" on green to grey transitions AND gray to red transitions. Will not print back-to-back repeated positions (i.e. green → grey → red will only print the first green → gray "short" signal and not print "short" twice). Rotates long and short positions with no delay. "Early Signals" OFF Will close trades, but never open new ones, when guppy transitions to from any color to gray. Open long: guppy transitions gray to green. Close long: guppy transitions green to gray. Open short: guppy transitions gray to red. Close short: guppy transitions red to gray. Does not rotate long and short positions back to back. Additionally: Can toggle on/off the 200EMA. Default is off. Can toggle on/off short positions. Default is on. In development: alerts
Pine Script™ strategy
by StanleyBostich
10
Custom Screener with Alerts [QuantNomad]Some time ago I published an example of simple custom screener in PineScript: The only thing this screener did is created a dynamic label with screener output. Recently TradingView announced alerts from the strategy with the possibility to add custom messages to alerts. So using it I was able to create a bit more advanced screener which sends results as alert messages. With tools like Alertatron, you can easily redirect them to Telegram if you want. It works for 40 symbols (limitation of the number of security calls). To create your own screener you need to change only screenerFunc. The logic of this function is very simple, it outputs value you want to display in screener and condition based on which your screener should filter your stocks. To create alerts for this screener create an alert from strategy and use {{strategy.order.alert_message}} as alert message. Do you know now how to make this screener better? Let me know. Disclaimer Please remember that past performance may not be indicative of future results. Due to various factors, including changing market conditions, the strategy may no longer perform as good as in historical backtesting. This post and the script don’t provide any financial advice.
Pine Script™ strategy
by QuantNomad
72
Twin Range Filter Algo@Colinmck used two different ranges to generate signals. Read his release notes to find out what the original script does. I added one condition which seems to increase performance on 15m BTCUSD as well as 1h BTCUSD and that is ATR with 32 periods being smaller than ATR with 64 periods. I used my script Volatility Optimiser to discover this tendency. Both buying and selling conditions are same as in @Colinmck's script plus one condition of my own. You can disable my condition. Target and stop-loss are manually set values in ticks. Time stop-loss is manually set value in a number of candles. After this number of candles, a position always exits (or should 😇). You can disable it by inserting a very long period. I do not recommend it, because a value of indicator should not be measured in luck and if market starts moving in the direction after 40 periods, the predictive capability of an indicator is questionable. I used 300/150/17 for 15m BTCUSD chart and 900/30/17 for 1h BTCUSD. I didn't try to optimize any other parameters for these periods. Since this script relies mostly on volatility for its prediction, I wouldn't recommend using it on its own. Individual approach to the market is recommended. Also, it didn't work on EURUSD when using the same default values and different order management (tp, sl, time sl), so it is probably not as versatile. Let me know what do you think of this strategy. If you have some ideas about how to make it more reliable, share it in the comments, I might put it to the test. Good luck 🍀
Pine Script™ strategy
by OrcChieftain
23
BO - Bar's direction Signal - BacktestingBO - Bar's direction Signal - Backtesting Options: A. Factors Calculate probability of x bars same direction 1. Periods Counting: Data to count From day/month/year To day/month/year 2. Trading Time: only cases occurred in trading time were counted. B. Timezone 1. Trading time depend on Time zone and specified chart. 2. Enable Highlight Trading Time to check your period time is correct C. Date Backtesting * Only cases occurred in Date Backtesting were reported. D. Setup Options & Rule 1. Reversal after 2 bars same direction * Probability of 3 bars same direction < 50 * 2 bars same direction is start of series 2. Reversal after 3 bars same direction * Probability of 4 bars same direction < 50 * 3 bars same direction is start of series 3. Reversal after 4 bars same direction * Probability of 4 bars same direction < 50 * 3 bars same direction is start of series 4. Reversal after 5 bars same direction * Probability of 5 bars same direction < 50 * 4 bars same direction is start of series 5. Reversal after 6 bars same direction * Probability of 6 bars same direction < 50 * 5 bars same direction is start of series
Pine Script™ strategy
by inno14
4
Strategy Death To The Bear Simple strategy for the indicator "Death To The Bear". Simple rules: - Entry according to the selected weapons. - Take profit 1 (TP1) in% of daily ATR (can be set, default 20%) - Active Stop in Breakeven when I take profit in TP1. - Take profit 2 (TP1) in% of daily ATR (can be set, default 30%) * Pyramidization can be changed from the configuration (maximum number of tickets to average your price) * Many do not like to pyramid, but I can assure you that with good management, and good choice of the instrument and time frame, you will get good money. Note: at the request of some people who cannot see the EMOJI in the configuration you can choose TEXT. Thumbs up
Pine Script™ strategy
by Dreadblitz
15
QuantCat Mom Finder Strategy (1H)QuantCat Momentum Finder Strategy This strategy is designed to be used on the 1 hour time frame, on all x/btc pairs. The beautiful thing is it plots the take profit, and stoploss for you for each entry- where I would say use the stoploss for sure and feel with water with how the price action is looking when in profit. In this strategy, I actually implemented my own trading style into building the strategy. Having to replicate my own trading strategy into an algorithm, I can't make it exactly perfect to how I would trade, but what I can do is try and program the parameters that give it the absolute best chance of making a big move with a small drawdown- which replicates part of my momentum trading style. Here I am using RSI, MACD, EMA and trend filtering values to find moments where there has been a momentum change to play the rest of the move. It only picks the best entries. There is always a 3-4 R/R move on average with with these trades, meaning 1 in 4 only need to hit to be a break even trader- where most of these strategies have about 35% hit rate. The stoploss is so crucial to minimise any damage from huge unexpected candles, the strategies can just be used for entries as well, you don't have to stick to the exact formula- of the long and short system, but this by itself is profitable. The system nets positive results on -ETH/BTC -LTC/BTC -XRP/BTC -ADA/BTC -NEO/BTC etc. We also have a free 15M strategy available too. You can join our discord server to get live alerts for the strategy as well as speak to our devs! Link in signature below!!!
Pine Script™ strategy
by QuantCat
2
QuantCat Intraday Strategy (15M)QuantCat Intraday Strategy This strategy is designed to be used on the 15 minute time frame, on liquid x/btc pairs and BTC/USD. It works by having 2 moving averages, automatic stop loss calculation, and taking positions on MA crosses and MA zone bounces for confirmation. Stoploss is so crucial to minimise any damage from huge unexpected candles, the strategies can just be used for entries as well, you don't have to stick to the exact formula- of the long and short system, but this by itself is profitable. The system nets positive results on -BTC/USD -ETH/BTC -LTC/BTC -XRP/BTC There is a small element of trend filtering also for the MA's, but I found adding it in actually hindered performance when testing and training the strategies unless it was using a loose value. You can get live alerts for this strategy and speak to our developers by joining our server on discord! (Link in signature)
Pine Script™ strategy
by QuantCat