Get started

X-volume

GreyPool VSA VolumeGreyPool VSA Volume Indicator Color Key: Blue = Below Average or Low Volume Purple = Average Volume Orange = High Volume Red = Very High Volume Symbol Key: Circle = Test on Low Volume Diamond = TrapUp or TrapDown Bar on High or Very High Volume Star = Climactic Action Bar Background Highlight Key: Green Background = Last 3 bar were increasing high or very high volume including a climactic action DOWN bar or trap DOWN bar Red Background = Last 3 bars were increasing high or very high volume including a climactic action UP bar or trap UP bar Available Alerts: When a Green or Red background appears When a Climactic Action Up or Down bar appears
Pine Script™ indicator
by GreyPool
1
Price/Volume Value HistogramAn interesting implementation of mine to measure an asset changes based on asset price velocity and volume velocity. The indicator acts as asset value calculator. Long and Short. ==Points System Rules== UPTRENDING If Current Close is higher than previous Close and Current Volume is bigger than previous Volume: Adds Close Points and Volume Points Otherwise check If Current Close is higher than previous Close: Adds Only Close Points DOWNTRENDING If Current Close is lower than previous Close and Current Volume is bigger than previous Volume: Reduces Close Points and Volume Points Otherwise check If Current Close is lower than previous Close: Reduces Only Close Points ==Plotting== Result of the values are summed up to a histogram. Obviously on increasing prices and volume the histogram will be above zero line and on the Bullish side (green color), otherwise, on the Bearish side (red color). You can't cheat the price movement, it's just what it is. Optional to smooth it by EMA (set to true by default). Like if you Like and Enjoy! Follow for upcoming indicators.
Pine Script™ indicator
by dman103
23
Volume Brakeout v1Volume Brakout indicator is used to help determine trend direction strictly based on Negative and Positive volume data. How to Read: - Moving Average crossovers are used to help determine a possible trend change or retracement. - The area cloud on the bottom is calculated by the difference of the moving averages. This could be used to help determine the trending volume strength. - Bright colored volume bars are large volume spikes calculated by the x factor in the options. Other changes: - Volume Depth is going open source with numerous of its indicators. This is only one of many! - Volume is now displayed without being altered for calculations.
Pine Script™ indicator
by dineshdeore
3
Custom VWAP With TPHello everyone its base on vwap indicator (Volume Weighted Average Price) How to work its indicator? ➤ Long = if open bar above vwap ➤ Short = if open bar below vwap Note: we are using internal once per bar close its mean indicator not repainted Indicator Feature ➤ Long Side Signal With Alerts ➤ Short Side Signal With Alerts ➤ Long side Take profit Calculated By Open Bar You Can Also Change Calculate Percent input ➤ Short side Take profit Calculated By Open Bar You Can Also Change Calculate Percent input ➤ there are 4 Takes profit from Long side with Alerts ➤ there are 4 Takes profit from short side with Alerts ➤ Indicator signal Starting time by default Indian NSE market Open time ➤ Close Trade with time you can also alert closing time by default 15:15 GMT+5:30 Important: This Indicator we are using for Automation Trading if You Want This Indicator Access Please Contact me PM on Tradingview
Pine Script™ indicator
by Manoj-verma
MVolume‴ | Multi Volume Indicator‴Hello Traders! This simple but yet efficient indicator view presents the Volume with the following benefits: 1. both buyer and seller volume are shown separately and above zero line, this way its possible to see which side is dominant; 2. both buyer and seller volume are shown separately, with buyers above the zero line and sellers bellow the zero line. The dominant side is shown in its darker color version; 3. 20 period Moving Average line is calculated separately and plotted for each side (buyer/seller); 4. 50% of the 20 period Moving Average line is calculated separately and plotted for each side (buyer/seller); 5. possibility to apply Directional OHLC values to enhance the buyer/seller movement interpretation. p.s.: the chart presents two MVol indicators to let you see the different possible views. To request access to this invite-only script, please DM me.
Pine Script™ indicator
by MarceloTorres
2
DePriExchange weighted price for cryptocurrencies DECENTRALIZED PRICE CHART FOR DECENTRALIZED WORLD See non-manipulated , globally price action that comes from whole liquidity! The main idea behind this script is that... The value of each trading pair finally determined globally and the price displayed in exchanges is its own and not global! differences between exchanges, reduced to near zero gradually by market makers and arbitrages, so.. Every min tick price changes Must be backed by liquidity to be part of the global fluctuations more liquidity gives it more credibility more credibility give it more weight ..Against opposing movements. This script can collect price of crypto pairs from 12 exchanges that listed on TV and have effective volume. In the first step, summarizes the volume of all exchanges and creates the total volume In the next step, divide each exchange volume to total volume to obtain relative weight of each exchange. In the final step, multiply each exchange price to weight of itself and summarizes these numbers .. now, we have Exchange weighted price! The results on high liquidity pairs like BTCUSDT, ETHUSDT, is not much differ then simple chart but when you apply it on lower liquidity, lower time frames of altcoins, you realize its benefits and usefulness. Altcoins chart in composite and simple mode is very differ, I hope you enjoy from TRUE CHART. With this, also you can.. Filter and smooth candlestick chart with SMA or EMA Plot a line chart of pair at your desired frame separate from the main chart for monitor important price levels Get realtime report of whole volume of pair on included exchanges Get realtime report of each exchange weight and share Note.1: some of pairs queted on more than one like BTCUSD, BTCUSDT, BTCUSDC and etc. In this pairs we choose the one that usually has more volume on that exchange. Note.2: At this time, supported queted currencies are BTC, ETH, USD, USDT, BUSD, USDC, USDK. Note.3: This script is relatively heavy! This is not cuz of bad coding. Each bar compution contains at least one plot and some of security calls, so 10 to 15 seconds is normal load time. Note.4: You can combine this with your price action base scripts and use balanced OHLCV. The necessary explanations about this are available in the code. Note.5: You must only include exchanges that support your ticker, Otherwise you will receive an error. I hope it comes useful to you.
Pine Script™ indicator
by Algorca
3
Sumon Pal Volume Osc This is a volume oscillator calculated by the volume action on each bar price movement over a period of time. When the short term volume(green line) is above the long term volume line(red)it indicates volume is coming and buying pressure may be observed. Similarly when the short term volume is below the long term, volume is getting liquidated and selling pressure may be observed. This indicator alone can't be used for buying or selling decision. This indicator can be used along with price action break out or break down level to get an idea whether volume is supporting the break out/down or not. Disclaimer: Backtest this indicator with price action over a period of time and understand how it works before taking any trading decision. Trading in equity is always risky. Asses your risk profile and trade by managing proper risk.
Pine Script™ indicator
by sumonpal
Closing RangeIndicator shows the closing range of each bar. Closing range is where the bar closes (high - close) relative to the length of the wick (high - low). A close at the top of the wick would be 100%, middle 50%, bottom 0%. In addition, the indicator multiplies closing range by volume to weight toward high volume days. A simple moving average is applied to visualize trend in volume-weighted closing range over time. Options include changing the threshold of bullish closes. The default is 50%, but you can view a close above 40% as a bullish. Simple moving average can be enabled/disabled as well as the length adjusted.
Pine Script™ indicator
by drewby4321
VWAP OscillatorToday I'm proposing a simple VWAP oscillator script to trade buy and sell waves more easily. You trade this similar to how you trade Awesome Oscillator, so if you want an explanation just look up YT videos. In addition to that, this will also show volume squeezes, please note that this is a makeshift way and not real volume squeeze phenomena of volume profile and tape. None the less, it is quite good at allowing you to ride out good trending waves and locate weak price action due to volume squeeze. You can turn off bar coloring from settings if you don't want this. For ease of reading, I've also applied Allenstars Dynamic zones on this indicator so you can easily locate where the reading is entering in long and where it is in sell, this is compared to selected sample size. I've already selected the most common setting for that, so you don't really need to fiddle with it unless you find something better. This indicator can be used to trade divergences as well, in fact, I feel it is better for that compared to RSI/MACD, the usual suspects. Past performance is not assurance of future performance and this idea is published for only educational purposes, author taken no responsibility for your profit or loss.
Pine Script™ indicator
by Pratik_4Clover
13
Slippage Calculator Hello everyone, This is the first script I publish, also my English is not the best my apologies. This simple study script is an attempt to estimate the slippage during a trade. By no means it is a precise calculation, it is just an approach that can be improved. You are welcome to take this simple script and use it and change it at your convenience just ask your acknowledge. My approach considers the total fluctuation the price gets as a consequence for the total volume on that specific bar. The volume on each bar is given in BTC, thus you get that by using the formula. vol = volume * vwap The total variation in price is considered as twice the size of the bar plus the gap between to consecutive bars. that is the total fluctuation of price on each bar = (2 * (high - low) + abs(open - close )) which is not totally true since inside each bar price can fluctuate a lot more. The script considers you are trading your total equity (eq_BTC ) each time. The fraction of your equity of the volume bar is eq_BTC / vol Then eq_BTC / vol is the portion or the total fluctuation in price that is due to your entry or exit from the market. (2 * (high - low) + abs(open - close )) * eq_BTC / vol is the average change in price due you enter o exit a position. ** the 2 factor accounts for the two directions in the market buying and selling. There is more behind this formula I can explain you in more detail if you like. I haven't seen anywhere a formula like this one, so it is intended to be a first attempt to get a better approach. Finally the output of the scripts is how many ticks the price might change due to your trade on each bar round(slippage/syminfo.mintick) The script is focused in crypto but it can be used as well on forex markets. Take care, @yvponce
Pine Script™ indicator
by yvponce
3
Freedom of MovementFreedom of Movement Indicator --------------------------------------------------------- In “Evidence-Based Support & Resistance” article, author Melvin Dickover introduces two new indicators to help traders note support and resistance areas by identifying supply and demand pools. Here you can find the support-resistance technical indicator called "Freedom of Movement". The indicator takes into account price-volume behavior in order to detect points where movement of price is suddenly restricted, the possible supply and demand pools. These points are also marked by Defended Price Lines (DPLs). DPLs are horizontal lines that run across the chart at levels defined by following conditions: * Overlapping bars: If the indicator spike (i.e., indicator is above 2.0 or a custom value) corresponds to a price bar overlapping the previous one, the previous close can be used as the DPL value. * Very large bars: If the indicator spike corresponds to a price bar of a large size, use its close price as the DPL value. * Gapping bars: If the indicator spike corresponds to a price bar gapping from the previous bar, the DPL value will depend on the gap size. Small gaps can be ignored: the author suggests using the previous close as the DPL value. When the gap is big, the close of the latter bar is used instead. * Clustering spikes: If the indicator spikes come in clusters, use the extreme close or open price of the bar corresponding to the last or next to last spike in cluster. DPLs can be used as support and resistance levels. In order confirm and refine them, FoM (Freedom of Movement) is used along with the Relative Volume Indicator (RVI), which you can find here: Clustering spikes provide the strongest DPLs while isolated spikes can be used to confirm and refine those provided by the RVI. Coincidence of spikes of the two indicator can be considered a sign of greater strength of the DPL. More info: S&C magazine, April 2014.
Pine Script™ indicator
by starbolt
8
[WJ] - Corrected Seconds Volume** ONLY WORKS FOR SECONDS CHARTS ** After staring at a chart and scratching my head, I realized that the volumes were being incorrectly reported for lower time frames. A chart that has no updated tick for 5 minutes will report the volume that occurred in the WHOLE 5 minutes - in one tick. For a 5 second chart like above, we have now a chart that at first appearance is giving us numbers to believe that there is MUCH more liquidity than is real. This can really confuse us, and other scripts that rely on volume information. This script simply takes into consideration the time delay before the next tick. If it took 5 minutes to update a tick, the volume should be divided into whatever seconds we are currently using. I also changed the coloring code - if there is no length to the candle it will look at the candle before it to determine if it is a positive or negative movement. It does make technical sense to have the volume that occurred over 5 minutes in one tick as it is the true volume. However, this script should not be viewed as the absolute value, but a consistent, usable number that will be more accurate with tools. To give a quick example on why this is important: In a 10 second chart, we are given an updated tick every minute. In 2 minutes we have 2 ticks that have 1K volume each. Alternatively, we have a 10 second chart, and we are given an updated tick every 10 seconds. In 2 minutes we have 12 ticks that have 100 volume each. With quick mental math we can determine that the second scenario is actually (albeit slightly) more busy. However, a script would not do that extra layer of math and would assume that the first scenario is bouncing off the walls with activity and the second is a graveyard. It's exactly for this example that I have created this script, and I hope it helps someone else out.
Pine Script™ indicator
by woodyjohnson
1
MACD-X, More Than MACD by DGTMoving Average Convergence Divergence – MACD The most popular indicator used in technical analysis, the moving average convergence divergence (MACD), created by Gerald Appel. MACD is a trend-following momentum indicator, designed to reveal changes in the strength, direction, momentum, and duration of a trend in a financial instrument’s price Historical evolution of MACD, - Gerald Appel created the MACD line, - Thomas Aspray added the histogram feature to MACD - Giorgos E. Siligardos created a leader of MACD MACD employs two Moving Averages of varying lengths (which are lagging indicators) to identify trend direction and duration. Then, MACD takes the difference in values between those two Moving Averages (MACD Line) and an EMA of those Moving Averages (Signal Line) and plots that difference between the two lines as a histogram which oscillates above and below a center Zero Line. The histogram is used as a good indication of a security's momentum. Mathematically expressed as; macd = ma(source, fast_length) – ma(source, slow_length) signal = ma(macd, signal_length) histogram = macd – signal where exponential moving average (ema) is in common use as a moving average (ma) fast_length = 12 slow_length = 26 signal_length = 9 The MACD indicator is typically good for identifying three types of basic signals ; Signal Line Crossovers A Signal Line Crossover is the most common signal produced by the MACD. On the occasions where the MACD Line crosses above or below the Signal Line, that can signify a potentially strong move. The standard interpretation of such an event is a recommendation to buy if the MACD line crosses up through the Signal Line (a "bullish" crossover), or to sell if it crosses down through the Signal Line (a "bearish" crossover). These events are taken as indications that the trend in the financial instrument is about to accelerate in the direction of the crossover. Zero Line Crossovers Zero Line Crossovers occur when the MACD Line crossed the Zero Line and either becomes positive (above 0) or negative (below 0). A change from positive to negative MACD is interpreted as "bearish", and from negative to positive as "bullish". Zero crossovers provide evidence of a change in the direction of a trend but less confirmation of its momentum than a signal line crossover Divergence Divergence is another signal created by the MACD. Simply, divergence occurs when the MACD and actual price are not in agreement. A "positive divergence" or "bullish divergence" occurs when the price makes a new low but the MACD does not confirm with a new low of its own. A "negative divergence" or "bearish divergence" occurs when the price makes a new high but the MACD does not confirm with a new high of its own. A divergence with respect to price may occur on the MACD line and/or the MACD Histogram Moving Average Crossovers , another hidden signal that MACD Indicator identifies Many traders will watch for a short-term moving average to cross above a longer-term moving average and use this to signal increasing upward momentum. This bullish crossover suggests that the price has recently been rising at a faster rate than it has in the past, so it is a common technical buy sign. Conversely, a short-term moving average crossing below a longer-term average is used to illustrate that the asset's price has been moving downward at a faster rate and that it may be a good time to sell. Moving Average Crossovers in reality is Zero Line Crossovers, the value of the MACD indicator is equal to zero each time the two moving averages cross over each other. For easy interpretation by trades, Zero Line Crossovers are simply described as positive or negative MACD False signals Like any forecasting algorithm, the MACD can generate false signals. A false positive, for example, would be a bullish crossover followed by a sudden decline in a financial instrument. A false negative would be a situation where there is bearish crossover, yet the financial instrument accelerated suddenly upwards What is “MACD-X” and Why it is “More Than MACD” In its simples form, MACD-X implements variety of different calculation techniques applied to obtain MACD Line, ability to use of variety of different sources , including Volume related sources, and can be plotted along with MACD in the same window and all those features are available and presented within a single indicator, MACD-X Different calculation techniques lead to different values for MACD Line, as will further discuss below, and as a consequence the signal line and the histogram values will differentiate accordingly. Mathematical calculation of both signal line and the histogram remain the same. Main features of MACD-X ; 1- Introduces different proven techniques applied on MACD calculation , such as MACD-Histogram, MACD-Leader and MACD-Source, besides the traditional MACD (MACD-TRADITIONAL) • MACD-Traditional , by Gerald Appel It is the MACD that we know, stated as traditional just to avoid confusion with other techniques used with this study • MACD-Histogram , by Thomas Aspray The MACD-Histogram measures the distance between MACD and its signal line (the 9-day EMA of MACD). Aspray developed the MACD-Histogram to anticipate signal line crossovers in MACD. Because MACD uses moving averages and moving averages lag price, signal line crossovers can come late and affect the reward-to-risk ratio of a trade. Bullish or bearish divergences in the MACD-Histogram can alert chartists to an imminent signal line crossover in MACD The MACD-Histogram represents the difference between MACD and its 9-day EMA, the signal line. Mathematically, macdx = macd - ma(macd, signal_length) Aspray's contribution served as a way to anticipate (and therefore cut down on lag) possible MACD crossovers which are a fundamental part of the indicator. Here come a question, what if repeat the same calculations once more (macdh2 = macdh - ma(macdh, signal_length), will it be even better, this question will remain to be tested • MACD-Leader , by Giorgos E. Siligardos, PhD MACD Leader has the ability to lead MACD at critical situations. Almost all smoothing methods encounter in technical analysis are based on a relative-weighted sum of past prices, and the Leader is no exception. The concealed weights of MACD Leader are such that more relative weight is used in the more recent prices than the respective weights used by the components of MACD. In effect, the Leader expresses more changes in average price dynamics for the recent price movement than MACD, thus eventually leading MACD, especially when significant trend changes are about to take place. Siligardos creates two less-laggard moving averages indicators in its formula using the same periods as follows Indicator1 = ma(source, fast_length) + ma(source - ma(source, fast_length), fast_length) Indicator2 = ma(source, slow_length) + ma(source - ma(source, slow_length), slow_length) and then take the difference: Indicator1 - Indicator2 The result is a new MACD Leader indicator macdx = macd + ma(source - fast_ma, fast_length) - ma(source - slow_ma, slow_length) • MACD-Source , a custom experimental interpretation of mine , MACD Source, presents an application of MACD that evaluates Source/MA Ratio, relatively with less lag, as a basis for MACD Line, also can be expressed as source convergence/divergence to its moving average. Among the various techniques for removing the lag between price and moving average (MA) of the price, one in particular stands out: the addition to the moving average of a portion of the difference between the price and MA. MACD Source, is based on signal length mean of the difference between Source and average value of shot length and long length moving average of the source (Source/MA Ratio), where the source is actual value and hence no lag and relatively less lag with the average value of moving average of the source . Mathematically expressed as, macdx = ma(source - avg( ma(source, fast_length), ma(source, slow_length) ), signal_length) MACD Source provides relatively early crossovers comparing to MACD and better momentum direction indications, assuming the lengths are set to same values For further details, you are invited to check the following two studies, where the first seeds were sown of the MACD-Source idea Price Distance to its Moving Averages study, adapts the idea of “Prices high above the moving average (MA) or low below it are likely to be remedied in the future by a reverse price movement", presented in an article by Denis Alajbeg, Zoran Bubas and Dina Vasic published in International Journal of Economics, Commerce and Management First MACD like interpretation comes with the second study named as “ P-MACD ”, where P stands for price, P-MACD study attempts to display relationship between Price and its 20 and 200-period moving average. Calculations with P-MACD were based on price distance (convergence/divergence) to its 200-period moving average, and moving average convergence/divergence of 20-period moving average to 200-period moving average of price. Now as explained above, MACD Source is a one adapted with traditional MACD, where Source stands for Price, Volume Indicator etc, any source applicable with MACD concept 2- Allows usage of variety of different sources, including Volume related indicators The most common usage of Source for MACD calculation is close value of the financial instruments price. As an experimental approach, this study will allow source to be selected as one of the following series; • Current Close Price (close) • Average of High, Low, and Close Price (hlc3) • On Balance Volume (obv) • Accumulation Distribution (accdist) • Price Volume Trend (pvt) Where, -Current Close Price and Average of High, Low, and Close Price are price actions of the financial instrument - Accumulation Distribution is a volume based indicator designed to measure underlying supply and demand - On Balance Volume (OBV) , is a momentum indicator that measures positive and negative volume flow - Price Volume Trend (PVT) is a momentum based indicator used to measure money flow 3- Can be plotted along with MACD in the same window using the same scaling Default setting of MACD-X will display MACD-Source with Current Close Price as a source and traditional MACD can be plotted eighter as a companion of MACD-X or can be selected to be plotted alone. Applying both will add ability to compare, or use as a confirmation of one other In case, traditional MACD Is plotted along with MACD-X to avoid misinterpreting, the lines plotted, the area between MACD-X Line and Signal-X Line is highlighted automatically, even if the highlight option not selected. Otherwise highlight will be applied only if that option selected 4- 4C Histogram Histogram is plotted with four colors to emphasize the momentum and direction 5- Customizable Additional to ability of selecting Calculation Method, Source, plotting along with MACD, there are few other option that allows users to customize the MACD-X indicator Lengths are configurable, default values are set as 12, 26, 9 respectively for fast, slow and smoothing length. Setting lengths to 8,21,5 respectively Is worth checking, slower length moving averages will lead to less lag and earlier reaction to price actions but yet requires a caution and back testing before applying Highlight the area between MACD-X Line and Signal-X Line, with colors emphasising the direction Label can be added to display Calculation Method, Source and Length settings, the aim of this label is to server only as a reminder to trades to be aware of settings while they are occupied with charts, analysis etc. Here comes another question, which is of more importance having the reminder or having the indicators with multi timeframe feature? Build-in Multi Time Frame features of Pine is not supported when labels and lines introduced in the script, there are other methods but brings complexity. To be studied further, this version will be with labels for time being. Epilogue MACD-X is an alternative variant of MACD, the insight/signals provided by MACD are also applicable to MACD-X with early and clear warnings for the changes in the trend. If MACD is essential to your analysis, then it is my guess that after using the MACD-X for a while and familiarizing yourself with its unique character and personality, you will make it an inseparable companion to other indicators in your charts. The various signals generated by MACD/MACD-X are easily interpreted and very few indicators in technical analysis have proved to be more reliable than the MACD, and this relatively simple indicator can quickly be incorporated into any short-term trading strategy Disclaimer : Trading success is all about following your trading strategy and the indicators should fit within your trading strategy, and not to be traded upon solely The script is for informational and educational purposes only. Use of the script does not constitutes professional and/or financial advice. You alone the sole responsibility of evaluating the script output and risks associated with the use of the script. In exchange for using the script, you agree not to hold dgtrd TradingView user liable for any possible claim for damages arising from any decision you make based on use of the script
Pine Script™ indicator
by dgtrd
156