Get started

Volume

Volume Buoyancy [LucF]█  OVERVIEW This indicator uses simple analysis of past ​volume to determine how well it supports recent market activity. What I call Volume buoyancy measures the strength and direction of that support. █  CONCEPTS Buoyancy In physics, buoyancy is the force described in Archemedes' principle :       Any object, wholly or partially immersed in a fluid, is buoyed up by a force equal to the weight of the fluid displaced by the object. I use the term loosely in this indicator's context, as "​Volume buoyancy" here can be directed either up or down, indicating that past ​volume displays a ​bullish or ​bearish bias. The calculation of buoyancy begins from a target quantity of ​volume summed over n bars. We then search chart bars backward, adding the ​​volume of up and down bars in two different slots until each slot reaches the target. We then calculate two average distances: one each for the up and down bars whose ​volume was summed to reach the target. These average distances are then subtracted and the difference is divided by the farthest distance we had to go to find the target ​in either up or down bars. The last part of the calculations looks like this: (avgDistanceDn - avgDistanceUp) / barsAnalyzed When the average distance of down bars is greater than that of up bars, buoyancy will be positive, indicating that past activity favors the upside and vice versa. The force's strength, which in the case of actual buoyancy is the weight of the displaced fluid, in our case is measured by the size of the gap between the average distance of up vs down bars in relation to the farthest distance we had to go in the past. Buoyancy is always between +1 and -1, with values higher/lower than 0.3/-0.3 typically being unsustainable. █  HOW TO USE THE INDICATOR Load the indicator on an active chart (see here if you don't know how). The default configuration displays:  • Buoyancy as a monochrome gray line.  • A channel between buoyancy and its MA, colored in one of four colors. The MA is not plotted by default, but you can see where it is with the channel.   The default settings use an Arnaud Legoux moving average over 20 bars.  • A fill between the MA and the centerline, which can be one of two colors.  • A high level at 0.30, a low level at -0.30 and the centerline at zero. The default target is the sum of ​volume in the last 20 bars. █  FEATURES The indicator's settings allow you to define:  • A higher timeframe you want the calculations to be made on. Note that you should then ensure your chart's timeframe is always lower than the higher timeframe you specified,   as calculating on a timeframe lower than the chart's does not make much sense because the indicator is then displaying only the value of the last intrabar in the chart bar.  • The number of bars for which to add volume to obtain the target value that will be searched for in past up and down bars.  • The display of the buoyancy and MA lines, the channel between them and the fill between the MA line and the centerline.  • The type and length of the MA. Using the "Style" tab of the indicator's settings, you can change the type and width of the lines, and the level values. █  INTERPRETATION Buoyancy shares the properties and shortcomings of many oscillators:  • It tends to be noisy, which is why the MA line can be helpful.  • The safest way to use it may be as a rough sentiment indicator, i.e., by paying more attention to its bull/bear state above/below the centerline.  • The more intrepid traders will want to use the channel between the main line and the MA, as it will provide earlier information than main line crosses of the centerline. Decreasing the number of bars for which the source is added to calculate the target value will increase the noise level, somewhat like decreasing an MA's length would, but keep in mind that the number of bars is not the length of an MA. █  LIMITATIONS Under some circumstances, the indicator will display zero values because it cannot find the target in past bars. This will happen at the beginning of the dataset when not enough past bars have elapsed, or in the rarer cases anywhere in the dataset, when the target cannot be found in the `MAX_BARS_BACK` number of bars defined in the first line of the indicator's code (the default is 1000). The calculations use a very primitive interpretation of ​volume similar to that of OBV , where all the ​volume of a bar is attributed to either the up or down slot. The indicator nonetheless produces results I think can be useful because we are not so much calculating precise buying/selling pressure as trying to build a big picture of where past activity over many bars appears to be taking price. ​Volume data is notoriously high-variance; large values that come into or exit the calculations' ​scope can produce sudden variations in results, somewhat like the drop-off effect in moving averages. █  NOTES  • The script can be used with any chart timeframe, including seconds.  • Historical values will always produce the same results. In real time, values will change until the bar closes.
Pine Script™ indicator
by LucF
10
FinNifty VolumesKEY TAKEAWAYS -Uses FinNifty Index Stocks Volume . -FinNifty Volume Indicator is created by adding all 20 FinNifty Stocks Volume together. -FinNifty Volume will be an important indicator in FinNifty Index technical analysis because it is used to measure the relative significance of a market move. -The higher the volume during a FinNiftyy index price move, the more significant the move and the lower the volume during a FinNifty index price move, the less significant the move. -Moving Average is also added.
Pine Script™ indicator
by bullseyetrading_lko
1
Unified Composite Index [UCI] [KuraiBlu] [LazyBear]The purpose of this indicator is to combine the four basic types of indicators (Trend, Volatility, Momentum and Volume) to create a singular, composite index in order to provide a more holistic means of observing potential changes within the market, known as the Unified Composite Index . The indicators used in this index are as follows: Trend - Trend Composite Index Volatility - Bollinger Bands %b Momentum - Relative Strength Index Volume - Money Flow Index The average price source can’t be altered as I’ve made it an average between ((open + close) / 2) and ((high + low) / 2). The best way to use this is by observing several of the indicators at once in conjunction with the average, rather than simply using the average produced to determine the right moment to enter, or exit a trade by itself. I've found when one indicator goes way out of bounds relative to the other three (and subsequently, the average array), then it presents a good buying, or selling opportunity. Some adjustments were made to several of the indicators in order to standardize them on a scale of 1-100 so that they could better accommodate the average array that was finally produced. Thanks to LazyBear for letting me strip down the WaveTrend Oscillator.
Pine Script™ indicator
by kuraiblu
2
24-hour Volume (Multi-color with target size)This indicator has added the option to set different colors for a size target so you can set and instantly knows if the volume is above or below your target by seeing the different colors. Furthermore, I've added the option to opt-out of the error message that blocked the use of the 'crypto' market with the 'tick' type because maybe some users needed it, for example: BYBIT:APEUSDT is by default not available but personally I want to see it, so I can turn it on in this script.
Pine Script™ indicator
by godtrix
[FFriZz]Priceline/TicksFFriZz | FrizLabz -- Priceline/Ticks Due to TradingView not allowing us to change the size or style of the Priceline I decided to make this You can change the style, size, color of the Price line with this Script There is also an option for the closing price to be plotted on the Priceline -- Colors -- You can have the Line and/or the Closing price change colors with the price movements both are adjustable to your preference -- Ticks -- Will show the difference in price from tick to tick when Volume moves but price doesn't it will show '▲▼' -- Adjustments -- The offset of the Close and Ticks can be adjusted from left to right Can Extend Priceline in all directions Can change the Line style and Width Can change all the Text sizes and Colors Can also Change Colors to change with Price movements Can Change number of Ticks to show -- Priceline -- You don't have to but I suggest going to the settings of your Chart and turning off the Priceline -- Challenge -- There is Some code at the bottom that will move the Label and Ticks to the x% of your screen in from the right once the last bar is no longer visible. I decided not to use it because even when the feature is turned off any movement of the chart resets the Ticks. If you find out a way to have it not reset the Ticks Let me know! If you find any bugs or have any suggestions feel free to DM me or leave a comment! Hope you Enjoy! -- FFriZz | FrizLabz
Pine Script™ indicator
by FFriZz
3
Volume/Market ProfileVolume/Market Profile is a 2 in 1 Volume Profile and Market Profile Indicator. This indicator is my own calculations for compiling a volume profile and market profile. The profile is progressively calculated live as the chart develops. I have made use of both Boxes AND Lines to allow me to display a finer granularity profile by displaying up to twice the max amount of lines allowed in tradingview. I have spent a lot of time to make sure the values are getting appended exactly as intended so that I can assure this profile is operating as precisely as possible within the limitations of the data available. To make my calculations easier to use in other places, I have made my volume profile a function that can be extracted and used whenever you need values from a volume profile. Feel free to read through the script if you don't understand how this profile is developed. I have made a commentary of my volume profile function to help you understand what exactly happens to compile the profiles. As mentioned before, This indicator doubles as a market profile. To view both at the same time you will need to add the indicator on your chart twice. I have built in comprehensive customizations to allow you to display your profiles however fits your needs. Timeframe: The aggregation period for profiles, to see a 1 week profile, change the timeframe to 1 week. Note: You can add custom timeframes by adding a custom timeframe in your chart timeframe dropdown menu. When you add timeframes in this area, they appear as options within indicators with the timeframe input. Sensitivity: Allows for greater or less granularity changes. The calculation method for granularity automatically changes depending on the range of your chart. Note: Multiply this value by 100 and that will be the max range (in ticks) of your price before the indicator automatically adjusts to make the profile less granular. (ex. If price ranges $1, and 1 tick is $0.01, granularity will be 0.01 with a sensitivity of 1+) Value Area %: % of total volume to display as the value zone. (_% of total profile values are contained within the value zone) Calculate as Market Profile: Uses a 1 Instead of the candle volume, to display a Market Profile. (If selected POC -> TPOC) Display Size: Sets the # of bars from the profile axis to the profile's max value. If set negative, profile will be displayed left of axis, if positive, profile will be displayed to the right of the axis. Display Offset: Sets the # of bars in front(or behind) the current chart bar to set the axis of the profile. If negative, the axis will be to the left of the current chart bar, if positive the axis will be right of the current chart bar. Display Historical POC/VAH/VAL: Choose to display historical poc,vah,val lines. Colors: I'm not explaining colors. Enjoy!
Pine Script™ indicator
by SamRecio
75
Daily VolumeShows a table in the top right of the chart with a few options: Only show intraday: By default the table will not be visible on timeframes of 1D or above, but this can be changed to show all the time if desired. Daily volume: Displays the volume for the day so far, regardless of what timeframe is currently showing. Yesterday's volume: Displays the volume from the previous day. As with the daily volume , it will show the entire previous day's volume regardless of the current timeframe. Average Volume: Displays the average volume based on a user-specified number of days. The default value is 30 days. Text color and table color: Choose the color settings for the table text and background.
Pine Script™ indicator
by benso87
2
Volume Volatality IndicatorVolume Volatility Indicator vol: volume; vma: rma of volume Cyan column shows (vol - vma)/vma, if vol > vma else shows 0 0 value means vol less than vma: good for continuation 0 < value < 1 means vol more than vma: good for trend value > 1 means vol more than 2 * vma: good for reversal tr: truerange; atr: averagetruerange Lime column show -(tr - atr)/atr, if tr > atr else show 0 0 value means tr less than atr: good for continuation 0 > value > -1 means tr more than atr: good for trend value < -1 means tr more than 2 * atr: good for reversal Cyan line = 1 Lime line = -1 This indicator shows the volume and truerange together. Good for filtering trending and consolidating markets. Thanks for the support.
Pine Script™ indicator
by ForgedOblivious
1
Point Of ControlStrategy and indicators are explained on the Chart. Here's how i read the chart. Entry: 1. Let the price close above the Ichimoku cloud 2. Price is above Volume Support zone 2. Make sure that momentum indicated with Green Triangles for Long Position Exit: 1. Orange cross at the bottom of the candle indicates price is about to weaken 2. Best time to exit is Volume Resistance + Bearish(Hammer or Engulf ) PS: Use it along with R-Smart for better results
Pine Script™ indicator
by VebhaInvesting
12
Volume Oscillator RefurbishedThis is an experimental version of Volume Oscillator. For more information about Volume Oscillator, please access the link below: www.tradingview.com Objective The script presented here provides some improvements over the original indicator, namely: Show multiple moving averages; Color the bars according to the direction of the averages; Color the bars when reaching predefined limits. Below is the print comparing with the original indicator: Thanks and credits: Volume Oscillator: TradingView Moving Averages: PineCoders, CrackingCryptocurrency, MightyZinger, Alex Orekhov (everget), alexgrover, paragjyoti2012, Franklin Moormann (cheatcountry)
Pine Script™ indicator
by andre_007
BTMM OFJ FOR BEST RESULTS PLEASE SWITCH TO LINE CHART OR DISABLE THE CHART CANDLES. BELOW IS A LINE WITH OPACITY TURNED DOWN TO 15% ASIA, LONDON, AND NEW YORK SESSIONS CAN BE CUSTOMIZED (1ST 3 HRS DEFAULT) VOLUME CANDLES CAN BE APPLIED WITH SUPPLY AND DEMAND OR MARKET MAKER METHOD. IN A STRONG TREND YOU WANT TO SEE REPEATED HIGH VOLUME CLUSTERS IN THE DIRECTION OFTHE TREND AND FADING LOW VOLUME ON THE RETRACE BASICK KEY LEVELS WEEKLY INITIAL BALANCE (MONDAY+TUESDAY HIGHEST HIGH AND LOWEST LOW) YESTERDAY AND LASY WKHI/LO QUICK APPLICATON
Pine Script™ indicator
by MatrixEdge
2
Volume Weighted Reversal BandsThis is a vwap & vwma hybrid with upper & lower deviation bands that provide excellent price channels and reversal areas. It can be used on lower & higher timeframes, just increase the deviation % for higher timeframes. Try out the 1 minute timeframe with .5% deviation for great scalping levels. Here is the calculation used for the main line. (VWMA100 + VWMA500 + VWMA1000 + VWAP) / 4 So it combines 3 VWMAs with the VWAP and divides that number by 4 to give us a moving average. Then we add new levels above and below that moving average to get our channels. The channels are separated by the % deviation you choose in the settings. For tighter bands, lower the percentage deviation and for wider bands, increase the percentage deviation. The fattest line in the middle is the main moving average and you can expect price to regularly return to this level. The thick lines are the main moving average plus or minus the percentage deviation you have set. There are 10 levels in each direction from the main moving average. The is also a thin short term moving average as well with a custom calculation. It takes 4 different length moving averages that are weighted and 4 more that are volume weighted and divides the total by 8.The lines will be green when price is above the line and red when price is below the line. The thin white line is the VWAP on its own. These lines will act as dynamic support and resistance so you can scalp them back and forth. These levels work so well because they are volume weighted and the algos hedge their positions back and forth constantly. For best results, use this indicator on tickers with the highest volume and trading action as the price will stick to these levels better when the big money players are hedging. Some great tickers for this indicator are APPL, SPY, BTC, ETH. All colors and linewidths can be customized in the settings easily as well as turning off the VWAP or short moving average and adjusting the percentage deviation for the channels. ***MARKETS*** This indicator can be used on all markets, including stocks, crypto, futures and forex. ***TIMEFRAMES*** This indicator can be used on all timeframes. ***TIPS*** Try using numerous indicators of ours on your chart for extra confirmation. Our favorites to pair with these bands are the Scalper Ribbon and Trend Friend Signals. The 3 combined give you a lot of extra confirmation on whether the market is going to reverse at these levels.
Pine Script™ indicator
by FriendOfTheTrend
4
MFI + Realtime DivergencesMoney Flow Index (MFI) + Realtime Divergences + Alerts This version of the MFI indicator adds the following 5 additional features to the stock MFI: - Optional divergence lines drawn directly onto the oscillator in realtime. - Configurable alerts to notify you when divergences occur. - Configurable lookback periods to fine tune the divergences drawn in order to suit different trading styles and timeframes, including the ability to enable automatic adjustment of pivot period per chart timeframe. - Background colouring option to indicate when the MFI oscillator has crossed above or below its centerline, or optionally when both the MFI has crossed its centerline and an external oscillator, which can be linked via the settings, has also crossed its centerline. - Alternate timeframe feature allows you to configure the oscillator to use data from a different timeframe than the chart it is loaded on. This indicator adds additional features onto the standard MFI , whose core calculations remain unchanged. Namely the configurable option to automatically, quickly and clearly draw divergence lines onto the oscillator for you as they occur in realtime. It also has the addition of unique alerts, so you can be notified when divergences occur without spending all day watching the charts. Furthermore, this version of the TSI comes with configurable lookback periods, which can be configured in order to adjust the sensitivity of the divergences, in order to suit shorter or higher timeframe trading approaches. What is the Money Flow Index ( MFI )? Investopedia describes the True Strength Indicator as follows: “The Money Flow Index ( MFI ) is a technical oscillator that uses price and volume data for identifying overbought or oversold signals in an asset. It can also be used to spot divergences which warn of a trend change in price. The oscillator moves between 0 and 100. Unlike conventional oscillators such as the Relative Strength Index ( RSI ), the Money Flow Index incorporates both price and volume data, as opposed to just price. For this reason, some analysts call MFI the volume-weighted RSI .” What are divergences? Divergence is when the price of an asset is moving in the opposite direction of a technical indicator, such as an oscillator, or is moving contrary to other data. Divergence warns that the current price trend may be weakening, and in some cases may lead to the price changing direction. There are 4 main types of divergence, which are split into 2 categories; regular divergences and hidden divergences. Regular divergences indicate possible trend reversals, and hidden divergences indicate possible trend continuation. Regular bullish divergence: An indication of a potential trend reversal, from the current downtrend, to an uptrend. Regular bearish divergence: An indication of a potential trend reversal, from the current uptrend, to a downtrend. Hidden bullish divergence: An indication of a potential uptrend continuation. Hidden bearish divergence: An indication of a potential downtrend continuation. Setting alerts. With this indicator you can set alerts to notify you when any/all of the above types of divergences occur, on any chart timeframe you choose. Configurable pivot periods. You can adjust the default pivot periods to suit your prefered trading style and timeframe. If you like to trade a shorter time frame, lowering the default lookback values will make the divergences drawn more sensitive to short term price action. How do traders use divergences in their trading? A divergence is considered a leading indicator in technical analysis , meaning it has the ability to indicate a potential price move in the short term future. Hidden bullish and hidden bearish divergences, which indicate a potential continuation of the current trend are sometimes considered a good place for traders to begin, since trend continuation occurs more frequently than reversals, or trend changes. When trading regular bullish divergences and regular bearish divergences, which are indications of a trend reversal, the probability of it doing so may increase when these occur at a strong support or resistance level . A common mistake new traders make is to get into a regular divergence trade too early, assuming it will immediately reverse, but these can continue to form for some time before the trend eventually changes, by using forms of support or resistance as an added confluence, such as when price reaches a moving average, the success rate when trading these patterns may increase. Typically, traders will manually draw lines across the swing highs and swing lows of both the price chart and the oscillator to see whether they appear to present a divergence, this indicator will draw them for you, quickly and clearly, and can notify you when they occur. Disclaimer: This script includes code from the stock MFI by Tradingview as well as the Divergence for Many Indicators v4 by LonesomeTheBlue.
Pine Script™ indicator
by PHVNTOM_TRADER
3