Get started

Cycles

Gaussian Volatility Adjusted Key Features:Gaussian Smoothing: Applies a Gaussian filter to smooth price data (based on EMA or raw close prices), reducing noise while preserving trend information. Volatility Adjustment: Uses ATR and standard deviation to create dynamic upper and lower bands around the smoothed price, adapting to market volatility. Trend Detection: Identifies bullish (price above lower band) or bearish (price below upper band) trends, with additional confirmation using standard deviation thresholds. Momentum Analysis: Measures momentum by calculating the price difference from key levels (upper band for bullish, Gaussian + standard deviation for bearish). EMA Confluence: Optionally integrates an EMA of the momentum difference to confirm trend signals, enhancing accuracy. Visual Output: Plots a zero line and an EMA line colored green (bullish) or red (bearish), with bar coloring to visually indicate trend direction.
Pine Script® indicator
by SurgeQuant
Golden Pocket Syndicate [GPS]Golden Pocket Syndicate is a multi-layered market analysis toolkit built for precision entries and sniper-style reversals in both trending and ranging conditions. The script fuses volume dynamics, golden pocket structures, market maker behavior, and liquidation cluster tracking into one high-confluence system. Core Features: • 📐 Golden Pocket Zones: Dynamic GP levels from daily, weekly, monthly, and yearly timeframes. These levels update in real-time and serve as confluence zones for entries and exits. • 📊 WaveTrend Divergence Diamonds: Momentum shifts are detected using a custom filtered WaveTrend cross system to mark high-probability reversal conditions. • 🧠 Market Maker Premium Divergence: Tracks price dislocation between CME and Binance to detect large player manipulation using a configurable premium threshold. • 💎 MM Reversal Diamonds: Identifies potential market maker traps and large player pivots using historical candle behavior, EMA alignment, and price structure breaks. • 📉 Stealth Liquidation Cluster Arrows: Volume-based liquidation pressure visualized as lightweight directional arrows based on calculated wick expansion and volume bursts. Highlights key zones where price is likely to bounce or reject. • 🧭 Trend Validation: Uses volume-based trend conditions and short-term EMA positioning to further qualify signals and eliminate noise. How to Use: This indicator is designed to help traders visualize confluence between key institutional price levels, momentum shifts, and volume-based pressure points. Long/short opportunities can be explored at marked reversal diamonds or liquidation zones that align with key GP levels. Intended for use on higher timeframes (15m to 4H), though flexible across any pair or market.
Pine Script® indicator
by RickyTSpanish
TFlab Trailing Stop StrategyThe trailing stop indicator dynamically adjusts stop-loss (SL) levels to lock in profits as price moves favorably. It uses pivot levels and ATR to set optimal SL points, balancing risk and reward. Trade confirmation filters, a key feature, ensure entries align with market conditions, reducing false signals. In 2023 a study showed filtered entries improve win rates by 15% in forex. This enhances trade precision. SL settings, ranging from very tight to very wide, adapt to volatility via ATR calculations. These settings anchor SL to previous pivot levels, ensuring alignment with market structure. This caters to diverse trading styles, from scalping to swing trading. The indicator colors the profit zone between the entry point (EP) and SL, using light green for buy trades and light red for sell trades. This visual cue highlights profit potential. It’s ideal for traders seeking dynamic risk management. A table displays real-time trade details, including EP, SL, and profit/loss (PNL). Backtests show trailing stops cut losses by 20% in trending markets. This transparency aids decision-making.
Pine Script® strategy
by ZakionBitcoin
Time Period Highlighter V2This indicator highlights custom time periods on any intraday chart in TradingView, making it easier to visualize your preferred trading sessions. You can define up to three separate time ranges per day, each with precise start and end times down to the minute (e.g., 08:30 - 12:15, 14:00 - 16:45, and 20:00 - 22:30). The indicator shades the background of your chart during these periods, helping you quickly identify when you're most active or when specific market conditions occur. Key Features: Set start and end times (hours and minutes) for up to three trading sessions. Automatically highlights these periods across any intraday timeframe. Uses 24-hour time format aligned with your TradingView chart timezone. Perfect for day traders, scalpers, or anyone needing clear visual cues for their trading windows. This tool is especially useful for reviewing trading strategies, backtesting, or ensuring you're focusing on high-probability market hours. Tip: Double-check that your chart timezone matches your desired session times for accurate highlighting.
Pine Script® indicator
by TheLimitBreaker
🔰 Smart Money RSI Liquidez v1 + EMA50 by Leo OntiverosThis indicator combines Smart Money concepts with RSI and liquidity sweeps to generate precise buy/sell signals—ideal for scalping and intraday trading (3M, 5M, 15M). 🔎 Key Features: ✅ RSI Divergences: Detects bullish and bearish divergences using the 14-period RSI. Signals are stronger in oversold (<30) or overbought (>70) zones. 💧 Liquidity Sweeps: Highlights areas where price sweeps liquidity (new lows/highs) and then reverses. Bullish sweep: price makes a new low and closes bullish. Bearish sweep: price makes a new high and closes bearish. 📈 Smart Confirmed Signals: BUY (🟢): Bullish divergence + RSI oversold + bullish liquidity sweep. SELL (🔴): Bearish divergence + RSI overbought + bearish liquidity sweep. 🎯 Visuals: Arrows and BUY/SELL labels directly on the candle. Background highlights for signal clarity. Includes the EMA50 (orange line) as a trend reference. ⚙️ Recommended Use: Timeframes: 3min, 5min, 15min. Best when combined with market structure (BOS, CHoCH), order blocks, and price action. Extra filter: take signals only in the direction of the EMA50 trend. 📢 Perfect for traders following institutional order flow and looking for high-probability reversal zones confirmed by volume and structure.
Pine Script® indicator
by walterontiveros276
Stablecoins $ Growth Rate % [SwissAlgo]🧠 Description This indicator tracks the percentage growth rate (ROC%) of the global market capitalization in $ of major stablecoins over a configurable lookback period. It provides a macro view of capital inflows and outflows from stable assets, which may be seen as a potential signal for upcoming crypto market expansions or contractions . The 1W timeframe is recommended for this indicator to filter out noise. To see the total market cap of the monitored stablecoins, please use this formula: CRYPTOCAP:USDT + CRYPTOCAP:USDC + CRYPTOCAP:DAI 💡 How It Works The script aggregates and monitors the market cap data in $ of the following stablecoins, sourced from TradingView's CRYPTOCAP: tickers: USDT USDC DAI USDE (Ethena) USD1 (Mountain Protocol) USDD It calculates the rate of change (ROC%) in total stablecoin capitalization over a user-defined period. A positive ROC% may indicate growing confidence or liquidity entering the market. A declining ROC% might precede selloffs or reduced market appetite. To improve interpretation, the indicator: 1. Includes an optional moving average of the growth rate 2. Colors the background dynamically: 🟢 Light/dark green when growth is increasing or accelerating 🔴 Light/dark red when growth is declining or weakening 3. Displays an info table showing the current ROC%, total stablecoin market cap, and percentage breakdown of each coin 🛎️ Alerts Built-in alerts will notify you when: Growth exceeds an upper threshold (default, +5%) Growth drops below a lower threshold (default, -5%) These thresholds help identify extreme inflows/outflows that may impact risk-on/risk-off behavior in broader crypto markets. 📈 Use Case This tool may be helpful for: Macro traders watching capital rotation trends Altcoin investors timing entries after stablecoin expansions Analysts identifying inflection points in crypto sentiment Quant/systematic traders as a filter for long/short regimes 🛠️ Customization You can: Adjust the growth window and the moving average length Show/hide the MA and zero line Adjust the upper/lower thresholds for remarkable ROC growth/decline ⚠️ Notes Due to limited historical data on newer stablecoins (e.g., USDE, USD1), the full growth rate history may appear flat before their launch dates. This is non-financial advice. Please do your own research before taking investment decisions, and do not risk more than you can afford to lose.
Pine Script® indicator
by SwissAlgo
Advanced DCAAdvanced DCA (Pine v5 – strategia & indicatore per TradingView) ⸻ ➤ Che cos’è Questo script implementa il Dollar-Cost Averaging “avanzato” illustrato nel video di riferimento e lo confronta - in tempo reale - con un DCA puro (versamento costante investito subito, senza logica di market-timing). Oltre a inviare gli ordini di back-test, disegna un cruscotto in alto a destra che riassume capitale, depositi, valore attuale delle due strategie e rendimento complessivo/medio. ⸻ ➤ Come funziona (logica passo-passo) Fase Descrizione Parametri coinvolti 1. Versamento mensile Ogni nuova candela mensile → si parte dal valore di Deposito mensile base (1 000 $ pre-definito). Deposito mensile base 2. Riduzioni in fase “caro” Se il prezzo sta +10 % sopra la MA a 12 mesi versi solo il 75 %. Se sale oltre +20 % versi il 50 %. Media mobile (mesi) • % sopra MA → 75 % • % sopra MA → 50 % • Contrib. % > soglia1/2 3. Buffer La parte non investita confluisce in un cash-buffer. – 4. Boost in fase “scontato” Quando il prezzo scende -10 % sotto la MA, il buffer viene frazionato sui successivi 6 mesi e aggiunto ai versamenti (100 %). % sotto MA per boost • Mesi di redistribuzione 5. Acquisto Lo script compra quote intere appena il contante raggiunge il costo di 1 quota (puoi passare alle frazioni sostituendo math.floor() con deposit/close). – 6. Benchmark DCA puro In parallelo calcola quante quote avresti con un versamento fisso di 1 000 $ investito interamente ogni mese (quote frazionarie). – 7. Dashboard Mostra capitali, cash, valore di mercato, confronto fra DCA puro/avanzato e rendimento totale / medio mensile. – ⸻ ➤ Significato dei campi nel cruscotto Etichetta Cosa mostra Start capital Capitale iniziale (tab Properties). Deposito mensile Valore del tuo versamento base. Investito (costo) Somma di capitale iniziale + tutti i depositi ufficiali. Non investito (cash) Buffer + pendenza ancora da investire. Valore mercato Valore a prezzo corrente delle quote eventualmente ancora in portafoglio. Depositi totali Contatore dei versamenti (non ridotti). DCA puro (valore) Quanto varrebbe oggi il DCA classico. DCA avanzato (valore) Equity totale della strategia avanzata (quote + cash). Rend. tot | medio % complessiva sul capitale versato e % media geometrica mensile. ⸻ ➤ Personalizzare per i propri test Vuoi… Imposta così Simulare il DCA puro thr1/thr2 = 999 e perc1/perc2 = 100. Media più “lunga” (come nel video: 50-year) Media mobile (mesi) = 600. Boost più aggressivo Mesi di redistribuzione = 1 e % sotto MA = –5. Riduzioni più frequenti Abbassa thr1/thr2 (es. 5 / 10 %). Evitare contante fermo Sostituisci la riga d’acquisto con qty = (depositAdv + extra) / close (quote frazionarie). ⸻ ➤ Avvertenze • È uno strumento di studio: non genera ordini live. • Le performance storiche non garantiscono risultati futuri. • Prova più timeframe, ETF o crypto per vedere dove il DCA avanzato porta reale vantaggio rispetto al DCA puro. Buon back-test! ------------------------------- Advanced DCA – Overview (Pine v5 strategy + indicator for TradingView) ⸻ What it does This script reproduces the “advanced” dollar-cost averaging (DCA) shown in the reference video and compares it live with a simple DCA (the full deposit invested every month with no timing filter). It places back-test orders and draws a compact dashboard in the top-right corner that tracks capital, deposits, current value of both approaches and total / average returns. ⸻ Workflow Step What happens Key inputs 1 Monthly deposit On every new monthly candle the script starts with Base monthly deposit (default $1 000). Base deposit 2 Trim when “expensive” If price is +10 % above the chosen MA, only 75 % is invested.If +20 %, only 50 % is invested. MA length, % above MA → 75 % / 50 %, Contribution % 3 Buffer The skipped money is parked in a cash buffer. — 4 Boost when “cheap” If price drops –10 % below the MA, the buffer is split over the next 6 months and added to the deposits. % below MA, Redistribution months 5 Buy The script buys whole shares as soon as cash ≥ 1 share price (switch to fractional by replacing math.floor() with deposit/close). — 6 Simple-DCA benchmark In parallel it tracks what you’d have by investing the full deposit every month (fractional shares). — 7 Dashboard Displays capital, cash, market value, simple vs advanced DCA and total / average monthly return. — ⸻ Dashboard fields Label Meaning Start capital Initial account size (Properties tab). Monthly deposit Your base contribution. Invested (cost) Initial capital + all official deposits. Un-invested (cash) Buffer + pending cash. Market value Current value of any open shares. Total deposits Count of all monthly deposits. Simple DCA (value) Value today of classic DCA. Advanced DCA (value) Total equity of the advanced method (shares + cash). **Return total avg** ⸻ Quick tuning Goal Change this Simulate pure DCA thr1/thr2 = 999, perc1/perc2 = 100. 50-year MA like the video MA length = 600 months. Stronger boost Redistribution months = 1, % below MA = –5. More frequent trims Lower thr1/thr2 (e.g. 5 % / 10 %). No idle cash Buy fractional shares: qty = (deposit + extra) / close. ⸻ Notes • This is a research tool—no live orders are sent. • Past results ≠ future returns. • Test different assets / timeframes to see when advanced DCA really beats simple DCA. Happy back-testing!
Pine Script® strategy
by rossimichele
The Great Anchors: Dual AVWAP Powered by RSI The Great Anchors *Dual Anchored Volume Weighted Average Price Powered by RSI* --- 📌 Overview The Great Anchors is a dual AVWAP-based indicator that resets dynamically using RSI extremes — either from the current asset or a master symbol (e.g., BTCUSDT). It identifies meaningful shifts in price structure and momentum using these "anchored" levels. It’s designed to help traders spot trend continuations, momentum inflection points, and entry signals aligned with overbought/oversold conditions — but only when the market confirms through volume-weighted price direction. --- 🛠 Core Logic • AVWAP 1 (favwap): Anchored when RSI reaches overbought levels (top anchor) • AVWAP 2 (savwap): Anchored when RSI reaches oversold levels (bottom anchor) • AVWAPs are recalculated each time a new OB/OS condition is triggered — acting like "fresh anchors" at key market turning points. --- ⚙️ Key Features 🔁 Auto or Manual RSI Thresholds → Automatically determines dynamic RSI OB/OS levels based on past peaks and troughs, or lets you set fixed levels. 🧠 Master Symbol Control → Use the RSI of a separate asset (like BTCUSDT, ETHUSDT, SOLUSDT, BNBUSDT, SUPRAUSDT) or indices (like TOTAL, TOTAL2, BFR) to control resets — ideal for tracking how BTC/major coins impacts altcoins/others. 🔍 Trend-Filtering Signal Logic → Signals are filtered for less noise and are triggered when: - Both AVWAPs are rising (bullish) or falling (bearish) - Price action confirms the structure 🎯 Visual Markers & Alerts → "💥" for bullish signals and "🔥" for bearish ones. Alerts included for automation or push notifications. --- 🎯 How to Use It 1. Add the indicator to your chart. 2. Choose whether to use RSI from the current symbol or a master symbol (e.g., BTC). 3. Select auto-adjusted or manual OB/OS levels. 4. Watch for: - AVWAP(s) making a significant change (at this point it's one of the AVWAPs resetting) - Check if price flip it upwards or downwards - If price goes above both AVWAPs thats a likely bullish trend - If price can't go above both AVWAPs up and fall bellow both that's a likely bearish trend - Price retesting upper AVWAP and bounce - likely bullish continuation - Price retesting lower AVWAP and dip - likely bearish continuation - Signal icons on chart ("💥 - Bullish" or "🔥- Bearish") Best suited for: • Swing traders • Momentum traders • Traders timing altcoin entries using BTC/Major asset's RSI --- 🔔 Signal Explanation 💥 Bullish Signal = • Both AVWAPs rising • Higher lows in price structure • Bullish candle close • Triggered from overbought RSI reset 🔥 Bearish Signal = • Both AVWAPs falling • Lower highs in price structure • Bearish candle close • Triggered from oversold RSI reset Signals reset by opposite signals to prevent noise or overfitting. --- ⚠️ Tips & Notes • Use AVWAPs as dynamic support/resistance, even without signal triggers • Pair with volume or divergence tools for stronger confirmation --- 🧩 Credits & Philosophy This tool is built with a simple philosophy: "Anchor your trades to meaningful moments in price — not arbitrary time." The dual AVWAP concept helps you see how price reacts after momentum peaks, giving you a cleaner bias and more precise trade setups. ---
Pine Script® indicator
by CharmyDexter
~🛟~⚓️~🛟~ #186🫘 絹ごし豆腐の作り方（にがり使用） 📌 材料（約2〜3人分） 材料 分量 乾燥大豆 150g（＝約1カップ） 水（浸水用） 適量 水（豆乳作り用） 約600ml にがり（塩化マグネシウム液） 約5ml（製品による） 🧂 必要な道具 ミキサーまたはフードプロセッサー 鍋（ステンレス製またはホーロー） 布巾またはさらし（豆乳を濾す用） 豆腐型（なければ耐熱容器やタッパーでも可） 温度計（あると便利） 🍳 作り方 ① 大豆の下準備 大豆を洗い、たっぷりの水に8〜10時間浸けて戻す（2倍以上に膨らむ）。 水を切り、戻した大豆と水（600ml）をミキサーにかけ、滑らかなペースト状にする。 ② 豆乳を作る 出来たペースト（生呉）を鍋に移し、中火にかけて焦げないように混ぜながら加熱する。 沸騰直前（約90℃）まで温めたら火を止め、布巾で濾す。 　→ 絞った液体が豆乳、絞りかすがおから。 ③ 豆腐を固める 豆乳を70〜80℃まで温めなおす。にがりを少しずつ加えながら静かに混ぜる（ゆっくり5〜10回程度）。 表面がふるふると固まりはじめたら、型に流し入れる。 蓋またはラップをして、30分〜1時間程度おく。冷蔵庫に入れて冷やしてもよい。 ✅ 完成 型から取り出してそのまま冷奴に。温かいうちにすくって「おぼろ豆腐」としても美味しい。 残ったおからは炒め物やおからクッキーなどに使えます。 🧠 ワンポイント にがりは入れすぎると苦くなり、入れなさすぎると固まらないため加減が重要です。市販のにがりのラベルに目安量が書いてあります。 柔らかめに仕上げたい場合は、にがりの量をやや少なめに。 【ご注意】 このレシピはAI（人工知能）によって自動生成されたものです。 内容には最新の調理知識や安全基準が反映されていない可能性があります。 実際の調理にあたっては、ご自身の判断と衛生管理のもとでご利用ください。 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 🫘 How to Make Silken Tofu (Kinugoshi Dōfu) 📌 Ingredients (Serves 2–3) Ingredient Amount Dried soybeans 150g (about 1 cup) Water (for soaking) Enough to submerge the beans Water (for blending) About 600ml Liquid nigari (magnesium chloride) About 5ml (adjust according to product instructions) 🧂 Tools Needed Blender or food processor Pot (stainless or enamel recommended) Cheesecloth or clean kitchen cloth Tofu mold (or a small heatproof container or food container) Cooking thermometer (optional but helpful) 🍳 Instructions 1. Prepare the soybeans Rinse the dried soybeans and soak them in plenty of water for 8–10 hours. They will expand to more than twice their size. Drain the soybeans. Blend them with 600ml water until you get a smooth paste. 2. Make soy milk Pour the soybean paste (called namagō) into a pot and heat over medium heat, stirring constantly to prevent burning. Heat until just before boiling (around 90°C / 194°F), then remove from heat. Strain the mixture through cheesecloth. The filtered liquid is soy milk, and the leftover pulp is okara. 3. Coagulate the tofu Reheat the soy milk to around 70–80°C (158–176°F). Add liquid nigari slowly while gently stirring 5–10 times. Do not overmix. When curds begin to form and the surface thickens, pour the mixture into a mold. Cover with a lid or plastic wrap and let it rest for 30 minutes to 1 hour. You may refrigerate it to cool. ✅ Finished Gently remove from the mold and serve chilled as hiyayakko (cold tofu). If eaten warm and unshaped, it can be enjoyed as oboro-dōfu (curdled tofu). 🧠 Tips Using too much nigari makes the tofu bitter; too little may result in incomplete coagulation. Follow the recommended amount on the bottle. For a softer texture, reduce the amount of coagulant slightly. ⚠️ Notice This recipe was automatically generated by AI (Artificial Intelligence). It may not reflect the latest cooking standards or safety guidelines. Please use your own discretion and follow proper hygiene when preparing food.
Pine Script® indicator
by p_o-Ohoooo
~🛟~⚓️~🛟~ #165🍝 アサリのペペロンチーノ（Vongole Peperoncino） 🧂 材料（2人分） 材料 分量 スパゲッティ 160g アサリ（殻付き・砂抜き済） 約300g にんにく 1片（薄切り） 鷹の爪（赤唐辛子） 1本（種を除いて輪切り） オリーブオイル 大さじ2〜3 白ワイン（または酒） 50ml パセリ（みじん切り） 少々（お好みで） 塩 適量 黒こしょう 適量 🔪 下ごしらえ アサリは砂抜き済のものを使用。使用前に殻をこすり合わせて洗っておく。 にんにくは焦げやすいため、薄めにスライス。 スパゲッティは塩を加えたたっぷりのお湯で、表示時間より1分短めに茹でる。 🍳 作り方 フライパンにオリーブオイルを入れ、にんにくと鷹の爪を弱火でじっくり加熱し、香りを引き出す。 にんにくがほんのり色づいたら、アサリと白ワインを加え、蓋をして中火で蒸し煮にする。 アサリの口が開いたら蓋を取り、スパゲッティを加える。 スパゲッティとソースをよく絡めながら、塩・黒こしょうで味を調える。 火を止めてパセリを散らし、皿に盛りつけて完成。 🍋 アレンジ例 レモン汁少々を仕上げに加えると爽やかな風味に。 魚介の旨味を濃くしたい場合は、アサリの出汁を煮詰めてからスパゲッティを絡める。 【ご注意】 このレシピはAI（人工知能）によって自動生成されたものです。 内容には最新の調理知識や安全基準が反映されていない可能性があります。 実際の調理にあたっては、ご自身の判断と衛生管理のもとでご利用ください。 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 🍝 Spaghetti with Clams and Peperoncino (Vongole-style) 🧂 Ingredients (Serves 2) Ingredient Amount Spaghetti 160g Clams (with shells, purged) Approx. 300g Garlic 1 clove (thinly sliced) Dried red chili 1 (seeds removed, sliced) Olive oil 2–3 tablespoons White wine (or sake) 50ml Fresh parsley A little, chopped (optional) Salt To taste Black pepper To taste 🔪 Preparation Use clams that have been purged of sand. Scrub and rinse the shells well before cooking. Slice garlic thinly to avoid burning. Boil spaghetti in salted water, 1 minute less than package instructions. 🍳 Instructions In a frying pan, heat olive oil over low heat. Add garlic and red chili and sauté gently until fragrant. When the garlic starts to lightly brown, add the clams and white wine. Cover with a lid and cook over medium heat until the clams open. Once the clams have opened, remove the lid and add the drained spaghetti. Toss everything together, letting the pasta absorb the clam juices. Adjust seasoning with salt and black pepper. Turn off the heat, sprinkle with chopped parsley, and plate to serve. 🍋 Optional Tips A few drops of lemon juice add a refreshing touch. To intensify the flavor, reduce the clam broth slightly before adding the spaghetti. ⚠️ Notice This recipe was automatically generated by AI (Artificial Intelligence). It may not reflect the latest cooking standards or safety guidelines. Please use your own discretion and follow proper hygiene when preparing food.
Pine Script® indicator
by p_o-Ohoooo
TJR Session Highs & Lows (Berlin Time)🔹 TJR Session Highs & Lows (Berlin Time) This script shows the Highs and Lows of the four major Forex sessions — Sydney, Tokyo, London, and New York — using Berlin local time (Europe/Berlin) as a reference. 🕒 Session Times (Berlin Time): Sydney: 23:00 – 08:00 Tokyo: 02:00 – 11:00 London: 09:00 – 18:00 New York: 14:00 – 23:00 🔧 Features: Clearly marked dashed lines for each session’s High and Low Configurable colors and visibility for each session Optimized for lower timeframes (e.g., 1m–15m) Perfect for SMC, ICT, and session-based strategies Created to match the style used by TJR (YouTube), this tool helps traders spot liquidity levels, daily ranges, and session-based price behavior. Du kannst das einfach in das „Description“ Feld beim Veröffentlichen einfügen. Wenn du willst, kann ich dir auch einen passenden Titel oder ein Icon vorschlagen. ChatGPT fragen
Pine Script® indicator
by nicksporri
TJR Session Highs & Lows (Berlin Time)Description: This indicator displays the Highs and Lows of the four major trading sessions – Sydney, Tokyo, London, and New York – based on Berlin Time (Europe/Berlin). ✅ Features: Separate lines for each session (High & Low) Automatically uses Berlin timezone (perfect for Swiss/German traders) Customizable colors Enable/disable individual sessions Compact dashed lines in the clean TJR style – not too long, not too short 📌 Ideal for Forex traders using Smart Money Concepts (SMC), Break of Structure, or Liquidity zone-based setups, just like shown by TJR. Note: Session times are preset for the Europe/Berlin timezone (UTC+2). Feel free to adjust them if you're in a different region. Wenn du willst, mache ich dir jetzt noch ein professionelles Cover-Bild für TradingView. Sag einfach Bescheid!
Pine Script® indicator
by nicksporri
z-score-calkusi-v1.142z-scores incorporate the moment of N look-back bars to allow future price projection. z-score = (X - mean)/std.deviation ; X = close z-scores update with each new close print and with each new bar. Each new bar augments the mean and std.deviation for the N bars considered. The old Nth bar falls away from consideration with each new historical bar. The indicator allows two other options for X: RSI or Moving Average. NOTE: While trading use the "price" option only. The other two options are provided for visualisation of RSI and Moving Average as z-score curves. Use z-scores to identify tops and bottoms in the future as well as intermediate intersections through which a z-score will pass through with each new close and each new bar. Draw lines from peaks and troughs in the past through intermediate peaks and troughs to identify projected intersections in the future. The most likely intersections are those that are formed from a line that comes from a peak in the past and another line that comes from a trough in the past. Try getting at least two lines from historical peaks and two lines from historical troughs to pass through a future intersection. Compute the target intersection price in the future by clicking on the z-score indicator header to see a drag-able horizontal line to drag over the intersection. The target price is the last value displayed in the indicator's status bar after the closing price. When the indicator header is clicked, a white horizontal drag-able line will appear to allow dragging the line over an intersection that has been drawn on the indicator for a future z-score projection and the associated future closing price. With each new bar that appears, it is necessary to repeat the procedure of clicking the z-score indicator header to be able to drag the drag-able horizontal line to see the new target price for the selected intersection. The projected price will be different from the current close price providing a price arbitrage in time. New intermediate peaks and troughs that appear require new lines be drawn from the past through the new intermediate peak to find a new intersection in the future and a new projected price. Since z-score curves are sort of cyclical in nature, it is possible to see where one has to locate a future intersection by drawing lines from past peaks and troughs. Do not get fixated on any one projected price as the market decides which projected price will be realised. All prospective targets should be manually updated with each new bar. When the z-score plot moves outside a channel comprised of lines that are drawn from the past, be ready to adjust to new market conditions. z-score plots that move above the zero line indicate price action that is either rising or ranging. Similarly, z-score plots that move below the zero line indicate price action that is either falling or ranging. Be ready to adjust to new market conditions when z-scores move back and forth across the zero line. A bar with highest absolute z-score for a cycle screams "reversal approaching" and is followed by a bar with a lower absolute z-score where close price tops and bottoms are realised. This can occur either on the next bar or a few bars later. The indicator also displays the required N for a Normal(0,1) distribution that can be set for finer granularity for the z-score curve.This works with the Confidence Interval (CI) z-score setting. The default z-score is 1.96 for 95% CI. Common Confidence Interval z-scores to find N for Normal(0,1) with a Margin of Error (MOE) of 1: 70% 1.036 75% 1.150 80% 1.282 85% 1.440 90% 1.645 95% 1.960 98% 2.326 99% 2.576 99.5% 2.807 99.9% 3.291 99.99% 3.891 99.999% 4.417 9-Jun-2025 Added a feature to display price projection labels at z-score levels 3, 2, 1, 0, -1, -2, 3. This provides a range for prices available at the current time to help decide whether it is worth entering a trade. If the range of prices from say z=|2| to z=|1| is too narrow, then a trade at the current time may not be worth the risk. Added plot for z-score moving average. 28-Jun-2025 Added Settings option for # of Std.Deviation level Price Labels to display. The default is 3. Min is 2. Max is 6. This feature allows likelihood assessment for Fibonacci price projections from higher time frames at lower time frames. A Fibonacci price projection that falls outside |3.x| Std.Deviations is not likely. Added Settings option for Chart Bar Count and Target Label Offset to allow placement of price labels for the standard z-score levels to the right of the window so that these are still visible in the window. Target Label Offset allows adjustment of placement of Target Price Label in cases when the Target Price Label is either obscured by the price labels for the standard z-score levels or is too far right to be visible in the window. 9-Jul-2025 z-score 1.142 updates: Displays in the status line before the close price the range for the selected Std. Deviation levels specified in Settings and |z-zMa|. When |z-zMa| > |avg(z-zMa)| and zMa rising, |z-zMa| and zMa displays in aqua. When |z-zMa| > |avg(z-zMa)| and zMa falling, |z-zMa| and zMa displays in red. When |z-zMa| <= |avg(z-zMa)|, z and zMa display in gray. z usually crosses over zMa when zMa is gray but not always. So if cross-over occurs when zMa is not gray, it implies a strong move in progress. Practice makes perfect. Use this indicator at your own risk
Pine Script® indicator
by calkusi
~🛟~⚓️~🛟~ #206ハンバーグの作り方 材料（2人分） 合いびき肉：300g 玉ねぎ：1個（みじん切り） 卵：1個 パン粉：1/2カップ 牛乳：1/4カップ 塩：小さじ1/2 こしょう：少々 サラダ油：大さじ1 作業工程 ボウルにパン粉と牛乳を入れ、吸収させておく。 フライパンにサラダ油（分量外）を引き、玉ねぎを中火で炒め、透明になるまで加熱する。粗熱を取る。 合いびき肉、卵、1のパン粉、炒めた玉ねぎ、塩、こしょうをボウルに入れ、粘りが出るまで混ぜる。 生地を2等分し、楕円形に成形する。空気を抜くため、手のひらで数回叩く。 フライパンにサラダ油を入れ、成形した生地を中火で焼く。片面に焼き色がついたら裏返し、弱火にする。蓋をして7〜8分加熱する。 中心に竹串を刺し、透明な肉汁が出れば加熱終了。赤い肉汁が出た場合は加熱を継続する。 必要に応じてソースをかける。盛り付けて終了。 【ご注意】 このレシピはAI（人工知能）によって自動生成されたものです。 内容には最新の調理知識や安全基準が反映されていない可能性があります。 実際の調理にあたっては、ご自身の判断と衛生管理のもとでご利用ください。 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ How to Make Hamburger Steak Ingredients (Serves 2) Ground beef and pork mixture: 300g Onion: 1 (finely chopped) Egg: 1 Bread crumbs: 1/2 cup Milk: 1/4 cup Salt: 1/2 teaspoon Black pepper: to taste Vegetable oil: 1 tablespoon Procedure Combine bread crumbs and milk in a bowl. Let the bread crumbs absorb the milk. Heat a frying pan with a small amount of vegetable oil (not included in listed amount). Cook chopped onion over medium heat until translucent. Let it cool. In a bowl, place the ground meat, egg, soaked bread crumbs, cooled onions, salt, and pepper. Mix until the texture becomes sticky. Divide the mixture into two equal portions. Shape each into an oval. Remove excess air by slapping between hands several times. Add vegetable oil to a frying pan. Place patties in the pan and cook over medium heat. Once browned on one side, flip and reduce to low heat. Cover with a lid and cook for 7–8 minutes. Insert a skewer into the center. If clear juice comes out, cooking is complete. If red juice comes out, continue cooking. Add sauce as needed. Plate and serve. ⚠️ Notice This recipe was automatically generated by AI (Artificial Intelligence). It may not reflect the latest cooking standards or safety guidelines. Please use your own discretion and follow proper hygiene when preparing food.
Pine Script® indicator
by p_o-Ohoooo
Daily High-Low RangeThis Pine Script calculates the daily range (High - Low) for each trading day to measure intraday volatility. The orange line shows the actual daily high-low range. The purple line represents the 10-day simple moving average of the daily range, smoothing out fluctuations for trend observation. This indicator helps identify whether intraday volatility is increasing or decreasing over time and can be used to assess market momentum or risk. 이 Pine Script는 각 거래일의 고가와 저가의 차이 (일중 변동폭)을 계산하여 일중 변동성을 시각화합니다. 주황색 선은 매일의 고가-저가 범위를 나타냅니다. 보라색 선은 일중 변동폭의 10일 단순 이동평균(SMA)으로, 변동성의 추세를 부드럽게 보여줍니다. 이 지표를 통해 최근 시장의 변동성이 커지고 있는지 줄어들고 있는지를 파악할 수 있으며, 시장 리스크 또는 모멘텀 판단에 활용될 수 있습니다.
Pine Script® indicator
by turtlekim
Price Deviation from MA5 (%)This Pine Script calculates and visualizes the percentage deviation of the current price from the 5-day simple moving average (SMA5). The blue line represents the daily deviation (%) from the 5-day moving average. The orange line shows the 10-day average of the deviation, providing a smoother trendline for volatility analysis. A gray baseline at 0% helps identify whether the price is trading above or below the SMA5. This indicator is helpful for identifying short-term overbought or oversold conditions and tracking intraday volatility behavior. 이 Pine Script는 현재 종가가 5일 이동평균선(MA5)으로부터 얼마나 떨어져 있는지(이격률, %)를 계산하고 시각화합니다. 파란색 선은 매일의 이격률(%)을 나타냅니다. 주황색 선은 이격률의 10일 평균값으로, 보다 부드러운 추세선을 제공합니다. **0% 기준선(회색)**을 통해 현재 가격이 MA5 위에 있는지 아래에 있는지를 한눈에 파악할 수 있습니다. 이 지표는 단기 과열/과매도 구간을 파악하거나, 일중 변동성의 흐름을 분석할 때 유용합니다.
Pine Script® indicator
by turtlekim